[GUIDE][venus|star|mars] How to install Xiaomi.eu ROM for Xiaomi MI11 / Pro / Ultra


yes, we want to check if latest make.f2fs 1.14.0 isnt causing these issues..
so try older platform-tools 30.0.4 with make.f2fs 1.13.0


Okay will do. Should I put the .bat install script (along with all other files) inside of the platform 30.0.4 folder before flashing? Similar to running a flashall.bat on non Xiaomi devices?

I know when I softbricked my pixel I just downloaded platform tool, added all Pixel image files to the folder, and ran flashall.bat and it resolved that.

Sorry for so many questions. I'm new to Xiaomi custom ROMs but I work with Tech for a living and I've flashed a TON of ROMs on other devices.
 
Okay will do. Should I put the .bat install script (along with all other files) inside of the platform 30.0.4 folder before flashing? Similar to running a flashall.bat on non Xiaomi devices?

I know when I softbricked my pixel I just downloaded platform tool, added all Pixel image files to the folder, and ran flashall.bat and it resolved that.

Sorry for so many questions. I'm new to Xiaomi custom ROMs but I work with Tech for a living and I've flashed a TON of ROMs on other devices.
if you didnt flash it yet from china ROM, try these steps
- run windows_fastboot_update_rom.bat
- after it is done, go to MiRecovery and wipe user data there..
 
if you didnt flash it yet from china ROM, try these steps
- run windows_fastboot_update_rom.bat
- after it is done, go to MiRecovery and wipe user data there..


I have not flashed it yet. So I just want to clarify.

You want me to try Running the update script FIRST, Then going into MiRecovery and wiping user data there?


Once I do that, should the ROM start up, or do I need to flash the full install script afterwards?
 
I have not flashed it yet. So I just want to clarify.

You want me to try Running the update script FIRST, Then going into MiRecovery and wiping user data there?


Once I do that, should the ROM start up, or do I need to flash the full install script afterwards?
yes, just run update and wipe data in Recovery.. then just reboot..
its test to exclude make.f2fs formatting storage..
 
All ok installing the eu version on my Mi 11 Ultra.

As expected, still no 4G+ on Vodafone UK so I assume no 5G either, will test later.
 
All ok installing the eu version on my Mi 11 Ultra.

As expected, still no 4G+ on Vodafone UK so I assume no 5G either, will test later.
which version did you install?
can you send me MD5 of downloaded file?
did you just update from previous ROM or clean install?
 
here is the output. Still failed
Code:
        F2FS-tools: mkfs.f2fs Ver: 1.13.0 (2019-09-24)

Info: Disable heap-based policy
Info: Debug level = 1
Info: Trim is disabled
Info: Set conf for android
Info: Segments per section = 1
Info: Sections per zone = 1
Info: sector size = 512
Info: total sectors = 972316632 (474763 MB)
Info: zone aligned segment0 blkaddr: 512
Info: add quota type = 0 => 4
Info: add quota type = 1 => 5
[f2fs_init_sit_area: 556]       Filling sit area at offset 0x00600000
C:\Xiaomi 11 Ultra\xiaomi.eu_multi_MI11Pro_MI11Ultra_21.4.15_v12-11-fastboot\platform-tools-windows/make_f2fs failed: 3221225477
fastboot: error: Cannot generate image for userdata
Rebooting                                          OKAY [  0.000s]
Finished. Total time: 0.004s

And back to fastboot
 
here is the output. Still failed
Code:
        F2FS-tools: mkfs.f2fs Ver: 1.13.0 (2019-09-24)

Info: Disable heap-based policy
Info: Debug level = 1
Info: Trim is disabled
Info: Set conf for android
Info: Segments per section = 1
Info: Sections per zone = 1
Info: sector size = 512
Info: total sectors = 972316632 (474763 MB)
Info: zone aligned segment0 blkaddr: 512
Info: add quota type = 0 => 4
Info: add quota type = 1 => 5
[f2fs_init_sit_area: 556]       Filling sit area at offset 0x00600000
C:\Xiaomi 11 Ultra\xiaomi.eu_multi_MI11Pro_MI11Ultra_21.4.15_v12-11-fastboot\platform-tools-windows/make_f2fs failed: 3221225477
fastboot: error: Cannot generate image for userdata
Rebooting                                          OKAY [  0.000s]
Finished. Total time: 0.004s


What did you input to create this output?
 
here is the output. Still failed
Code:
        F2FS-tools: mkfs.f2fs Ver: 1.13.0 (2019-09-24)

Info: Disable heap-based policy
Info: Debug level = 1
Info: Trim is disabled
Info: Set conf for android
Info: Segments per section = 1
Info: Sections per zone = 1
Info: sector size = 512
Info: total sectors = 972316632 (474763 MB)
Info: zone aligned segment0 blkaddr: 512
Info: add quota type = 0 => 4
Info: add quota type = 1 => 5
[f2fs_init_sit_area: 556]       Filling sit area at offset 0x00600000
C:\Xiaomi 11 Ultra\xiaomi.eu_multi_MI11Pro_MI11Ultra_21.4.15_v12-11-fastboot\platform-tools-windows/make_f2fs failed: 3221225477
fastboot: error: Cannot generate image for userdata
Rebooting                                          OKAY [  0.000s]
Finished. Total time: 0.004s
ok thanks..
try same with platform-tools-30.0.5
 
which version did you install?
can you send me MD5 of downloaded file?
did you just update from previous ROM or clean install?
Installed 12.5.2, a clean install. MD5 is 18e56d60def6bc08fd57c8bbe7730092

4g+/5G is ok on EE UK, but with CN version as well it doesn't seem to work on Vodafone UK
 
  • Like
Reactions: ingbrzy
Installed 12.5.2, a clean install. MD5 is 18e56d60def6bc08fd57c8bbe7730092

4g+/5G is ok on EE UK, but with CN version as well it doesn't seem to work on Vodafone UK


What version of platform tools did you use? Did you follow instructions on page 1?
 
What version of platform tools did you use? Did you follow instructions on page 1?


I'm also on 12.5.2 China. I know @ingbrzy asked me to flash update file first. But I'm tempted to do what you did. Because that would be two data points showing that flashing from 12.5.2 China works without issue.


You guys who are bricked, were any of you on 12.5.2?
 
still no joy on 30.5
Code:
        F2FS-tools: mkfs.f2fs Ver: 1.14.0 (2020-08-24)

Info: Disable heap-based policy
Info: Debug level = 1
Info: Trim is disabled
Info: Set conf for android
Info: Segments per section = 1
Info: Sections per zone = 1
Info: sector size = 512
Info: total sectors = 972316632 (474763 MB)
Info: zone aligned segment0 blkaddr: 512
Info: add quota type = 0 => 4
Info: add quota type = 1 => 5
[f2fs_init_sit_area: 572]       Filling sit area at offset 0x00600000
[f2fs_init_nat_area: 606]       Filling nat area at offset 0x02a00000
[f2fs_write_root_inode:1195]    Writing root inode (hot node), 49600 0 200 at offset 0x00300544
[f2fs_write_default_quota:1271]         Writing quota data, at offset 00049c01, 00049c02
[f2fs_write_qf_inode:1362]      Writing quota inode (hot node), 49600 0 200 at offset 0x00300545
[f2fs_write_default_quota:1271]         Writing quota data, at offset 00049c03, 00049c04
[f2fs_write_qf_inode:1362]      Writing quota inode (hot node), 49600 0 200 at offset 0x00300546
[f2fs_update_nat_root:1416]     Writing nat root, at offset 0x00002a00
[f2fs_add_default_dentry_root:1613]     Writing default dentry root, at offset 0x00049c00
Info: Overprovision ratio = 0.290%
Info: Overprovision segments = 1381 (GC reserved = 697)
[f2fs_write_check_point_pack: 759]      Writing main segments, cp at offset 0x00000200
[f2fs_write_check_point_pack: 896]      Writing Segment summary for HOT/WARM/COLD_DATA, at offset 0x00000201
[f2fs_write_check_point_pack: 923]      Writing Segment summary for HOT_NODE, at offset 0x00000202
[f2fs_write_check_point_pack: 935]      Writing Segment summary for WARM_NODE, at offset 0x00000203
[f2fs_write_check_point_pack: 946]      Writing Segment summary for COLD_NODE, at offset 0x00000204
[f2fs_write_check_point_pack: 954]      Writing cp page2, at offset 0x00000205
[f2fs_write_check_point_pack: 974]      Writing NAT bits pages, at offset 0x000003fe
[f2fs_write_check_point_pack: 995]      Writing cp page 1 of checkpoint pack 2, at offset 0x00000400
[f2fs_write_check_point_pack:1014]      Writing cp page 2 of checkpoint pack 2, at offset 0x00000405
[f2fs_write_super_block:1047]   Writing super block, at offset 0x00000000
Info: format successful
Sending 'userdata' (85 KB)                         OKAY [  0.004s]
Writing 'userdata'                                 OKAY [  0.002s]
Erasing 'metadata'                                 OKAY [  6.196s]
Erase successful, but not automatically formatting.
File system type raw not supported.
Finished. Total time: 12.688s
Rebooting                                          OKAY [  0.000s]
Finished. Total time: 0.003s
And back to fastboot