HyperOS 1.0 HyperOS 1.0 STABLE RELEASE

[deRt0d]

Did you try this command via ADB ?

adb shell pm compile -a -f --full
adb shell reboot

You're my man...that worked perfectly! Thank you very much!

 

[MiBoi9000]

feedback , previously was updated manually play store and play service and this did not fixed it, now tryed uninstall updates and update to the latest version on both and fixed it ( even was exact the same versions ), but...... big but... f**k google this resets my wallet and disconnect my wear os watch , so have to setup all again, this is total bullshit from google , why uninstall updates reset them , clear data resets them for sure , but why uninstall updates cleared the data too , there were no warning , no nothing , now have to setup the watch from scratch , which is very time consuming , as google do not allow watch to be paired again to the phone without fully reset first, so keep this in mind... very bad experience for me , had to do it twice before and it's pain in the ass , so keep this in mind if you have wear os device paired with the phone if you need to do it...

I use Xiaomi watch S3. No such issues. Enjoy

 

[Eclipse1991]

System launcher on latest LISA 1.0.5.0 keeps crashing, unable to use phone, unable to connect to wifi Also not sure since which version, the wifi on LISA unable to connect to wifi everytime the phone reboots. Need to reset the wifi everytime reboot the phone.

Also try my hint which I recommended to @deRt0d .

 

[kekec01]

Only Chinese users can unlock the bootloader on a CN phone. Only phones with a CE mark can be unlocked by an EU citizen. This has only been the case since the end of 2023, but it is common knowledge. From your post it can be seen that you bought the device from Trading Senshen, so it is a pure CN device for the Chinese market.

Thank You for Your answer. I bought a revocation device from Tradingshenzhen which was allready unlocked and with latest MIUI installed (on my request). And since I have Xiaomi 14 Global on HyperOS it seemed smoother in work (I know it has a new gen SD) so I decided to flash HyperOS on 13 Pro as well. I just had little trouble until I installed proper drivers. However, I didn´t know the information that only chinese users can unlock chinese devices and european users CE marked devices. If that is true, and I don´t have the reason not to believe You, this is very usefull info for my next purchases.

 

[iGears88]

Question
Poco f6 pro that it says global rom with this code name: UNKMIXM
It supports call recording?
Thanks for your help

all xiaomi.eu have call recording

 

[iGears88]

Do i always have to install the Xiaomi.eu GPay Module everytime i do an update?
Like 1.0.3.0 to 1.0.4.0 or only the first time i do a major update?

only when need to update the module

 

[PervizMikail]

Question
Poco f6 pro that it says global rom with this code name: UNKMIXM
It supports call recording?
Thanks for your help

Poco F6 Pro (vermeer / UNKCNXM) xiaomi.eu rom is based on China. The rom you mentioned is a global rom and does not support call recording

 

[Markusxaw]

Hello

My wife installed my old Xiaomi 12 with Xiaomi.eu_CUPID_OS1.0.8.0.
It doesn't have many apps installed and I do a deep cleaning every now and then. Unfortunately, sometimes your Xiaomi is slow and hangs when opening some apps like camera, settings, etc. Do you have any ideas what I could try besides buying her a new cell phone?
I used to always delete the Davlik cache after an update. Are you still doing that today? I would like to attack her cell phone (for self-protection ) as little as possible.

 

[banie01]

Settings-privacy-privacy dashboard-show system-SMS
Choose Google Play Services and allow

Sent from my 2210132G using Tapatalk

Thanks for this
Your suggestion solved my problem perfectly

 

[raulillo]

Since I upgraded my X14 Houji from the last weekly to this stable, whenever somebody's calling, the contact name is not pulled from the contacts. I have the stocks app from Xiaomi, not Google one's. Any advise? Both contacts and phone apps have permissions to access contacts.

 

[EduardoRGCM]

It is strange because the device it appears on (Snapdragon 860 SOC) has almost same HW as my phone (Snapdragon 870 SOC). Both devices are made by Xiaomi.

That way I was thinking it is rather SW (ROM) limitation than unsupported HW.

Can someone here please confirm you have this function (Limit charge to 80% of battery) and it really works? If so what phone do you have? Thanks

I tested it on the Poco X6 Pro (duchamp) and it doesn't work, it requires hardware integration for it to work.

 

[kirjasin]

Hello everyone. I have a huge trouble with my HyperOS on Poco F5(marble).
Since I upgraded from MIUI14 to HyperOS version 1.0.2 to the current 1.0.7, I've been experiencing issues during mobile calls where the person I'm speaking to can no longer hear me, and I have to switch to speakerphone to continue the conversation. Is there any way to fix this without reverting to Xiaomi MIUI 14?

A related question: if I switch from HyperOS to Xiaomi.EU MIUI 14 and lock the bootloader, will I still be able to install the latest version of the Google Pay fix in the future?

 

[JiaiJ]

@kirjasin You can't use a custom ROM with a locked bootloader.

 

[kirjasin]

@kirjasin You can't use a custom ROM with a locked bootloader.

No possible to install custom ROM and after that lock bootloader?

 

[Igor Eisberg]

No possible to install custom ROM and after that lock bootloader?

"You can't use a custom ROM with a locked bootloader" is the answer to your question.

 

[Dizel]

hi i have Hyper Os By xiaomi.eu
1.0.15.0.UMACNXM
Stebe

now i have update in my phone
1.0.16.0.UMACNXM
is that Possible to do update without lose my data

 

[gogocar62]

Of course

 

[thinkbig]

Hi, forgive me for my English but I'm using the translator to help me; on my Xiaomi 13 I installed the Miui 14.0.31.0 fuxi stable rom, now how do I switch to HyperOS 1.0? Could someone explain to me the steps to take?

 

[kwpang]

Sharing my experience if the gpay module update doesn't fix gpay issues.

On 12S ultra HyperOS.

To start off, ensure you have the latest gpay module installed. That's assumed.

1) Go to settings> apps > manage apps.
2) Click on the 3 dots on the top right, show system apps. You need to do this to show Google Play Services. No one answered me when I asked so I had to figure it out myself.
3) Go to Google Play Store. Uninstall updates, clear all data.
4) Go to Google Play Services. Uninstall updates, clear all data.
5) IMPORTANT! Go to Google Play Services (duplicate app, if there is one). Uninstall updates (if any), clear all data. Clearing data in just (4) is not sufficient. You have to clear BOTH (5) and (4). I was stuck here for days, and the Google Play Services in (4) wouldn't update, and the Wallet app kept crashing on the outdated Google Play Services.
6) Restart phone immediately.
7) Open Google Play Store, go to Settings> about> update. Let it do its thing. Then go to "manage apps" and let it update everything else too. Check the app info now and then to ensure both Play Store and Play Services are updated.
8) After updating, restart the phone again.
9) Clear data for Google Pay. Reinitialise.

Done!

 

[kirjasin]

"You can't use a custom ROM with a locked bootloader" is the answer to your question.

Thank you for your answer. What about first part of my question?

Spoiler: question

Hello everyone. I have a huge trouble with my HyperOS on Poco F5(marble).
Since I upgraded from MIUI14 to HyperOS version 1.0.2 to the current 1.0.7, I've been experiencing issues during mobile calls where the person I'm speaking to can no longer hear me, and I have to switch to speakerphone to continue the conversation. Is there any way to fix this without reverting to Xiaomi MIUI 14?

 

[MeiGuddet]

Hi, forgive me for my English but I'm using the translator to help me; on my Xiaomi 13 I installed the Miui 14.0.31.0 fuxi stable rom, now how do I switch to HyperOS 1.0? Could someone explain to me the steps to take?

All is written in first post.

 

[Igor Eisberg]

Thank you for your answer. What about first part of my question?

Spoiler: question

Hello everyone. I have a huge trouble with my HyperOS on Poco F5(marble).
Since I upgraded from MIUI14 to HyperOS version 1.0.2 to the current 1.0.7, I've been experiencing issues during mobile calls where the person I'm speaking to can no longer hear me, and I have to switch to speakerphone to continue the conversation. Is there any way to fix this without reverting to Xiaomi MIUI 14?

No idea, doesn't sound like our issue.

 

[kennethyha]

Hello everyone. I have a huge trouble with my HyperOS on Poco F5(marble).
Since I upgraded from MIUI14 to HyperOS version 1.0.2 to the current 1.0.7, I've been experiencing issues during mobile calls where the person I'm speaking to can no longer hear me, and I have to switch to speakerphone to continue the conversation. Is there any way to fix this without reverting to Xiaomi MIUI 14?

A related question: if I switch from HyperOS to Xiaomi.EU MIUI 14 and lock the bootloader, will I still be able to install the latest version of the Google Pay fix in the future?

Try installing carrier services in playstore.

 

[fmkhan100]

Kindly Upload Sapphiren 1.0.6.0
Thanks in Advance...

 

[PPM-Droid]

Many thanks for update Xiaomi 14 (Houji)
Same procedure: update ROM, update Modem