littlejonny17
Members
- Dec 1, 2018
- 27
- 15
Last edited:
MIUI 10 MIUI 10 STABLE RELEASE
- Thread starter ingbrzy
- Start date
- Status
ekalkici
Members
- Oct 23, 2017
- 80
- 30
littlejonny17
Members
- Dec 1, 2018
- 27
- 15
Can be also used for Redmi 5 Plus? Because on this device Quick Apps sometimes crash too.
- Oct 6, 2016
- 9,900
- 322
My wife using a Redmi5Plus global. Latest (they says storage bug.. for months) 10.0.4 on 8.1. Can I dirty flash EU 10.2.2.0 for her?
Hi all!
First time trying to install TWRP through adb to Xiaomi mi8SE.
Bootloader is unlocked.
All was ok... but after reboot can not boot into TWRP, but Mi-recovery 3.0 in launching instead of it.
Have tried to re-install TWRP twice... nothing....
So .. what I could be done wrong from my side?
What points need to be rechecked from my side?
Have someone full manual step by step about the process ? or give pls link to proper forum thread.
Thank You in advance.
First time trying to install TWRP through adb to Xiaomi mi8SE.
Bootloader is unlocked.
All was ok... but after reboot can not boot into TWRP, but Mi-recovery 3.0 in launching instead of it.
Have tried to re-install TWRP twice... nothing....
So .. what I could be done wrong from my side?
What points need to be rechecked from my side?
Have someone full manual step by step about the process ? or give pls link to proper forum thread.
Thank You in advance.
Attachments
master_yoda
Members
- Aug 9, 2018
- 17
- 15
I think no. Wipe Data is recomended procedure through TWRP befor flashing. Unlocking bootloader also.
Sent from my Redmi Note 4X using Tapatalk
I have bought mi mix 3 with unlocked boot loader and 10.2.1 eu installed. I d like to ask if I can update in the future via OTA when a new version will be released or will need to flash it again. Sorry for my poor English....
Fifamaniac
Members
- Apr 18, 2018
- 132
- 30
Doemst work on mine 5 plus, with magisk and miui 10... Turning around all ways...
Fifamaniac
Members
- Apr 18, 2018
- 132
- 30
OK, à bit of time with magisk and all works now...
Someone knows which version of viper4android to install on a Vince with xiaomi.eu 10.2.2?
Thanks
master_yoda
Members
- Aug 9, 2018
- 17
- 15
I think you are not following Post #1.
After fastboot flash recovery twrp.img
you should execute
fastboot boot twrp.img (not fastboot reboot)
See post #1.
Can I do OTA updates with the 10.2.1 eu stable or need to flash every time when new update will released ?
Hi everybody,
I'm on stable 10.2 on mi mix 3 and i've Big battery drain with 25% of cell stand-by. I have one sim in the phone. Someone have the same issue? And do you have a solution ? Sorry for my pour level in english and thanks for tour great works.
I'm on stable 10.2 on mi mix 3 and i've Big battery drain with 25% of cell stand-by. I have one sim in the phone. Someone have the same issue? And do you have a solution ? Sorry for my pour level in english and thanks for tour great works.
Hi,
Is the consumption of
"android system 30% for 4h30"
"screen 28% for 7h30"
is high ?
Mi Pad 4 !
Is the consumption of
"android system 30% for 4h30"
"screen 28% for 7h30"
is high ?
Mi Pad 4 !
Thank You very much!
Really my mistake. Understood wrong from post #1.
This time did everything in proper way, BUT... after fastboot boot twrp.img+Enter
everything came smoothly (see attachment), then fastboot rabit switching off and nothing happens, just black screen.
Phone is ok. Not like a brick.
It is possible to switch ON by Power button. I have been trying to switch on with volume UP pressed button as well. NOTHING. Can not launch TWRP.
What else problem can be?
Attachments
- Status
