MIUI 12.0 MIUI 12 STABLE RELEASE


Do you like this MIUI version?


  • Total voters
    4,215
Status
Not open for further replies.
Hello, Redmi Note 10 has two codenames:

sunny = India-exclusive model of the phone

mojito = Global/International model of the phone

Main difference between these models is about bands frequency.

;)
What? Where did you take that nonsense from?
sunny (K7A) is an international model without NFC.
mojito (K7AN) was supposed to be an NFC model, according to the project ID suffix "N", but seems to have been cancelled.
Anyway, mojito doesn't actually exist and is simply the base of the ROM for sunny.
 
What? Where did you take that nonsense from?
sunny (K7A) is an international model without NFC.
mojito (K7AN) was supposed to be an NFC model, according to the project ID suffix "N", but seems to have been cancelled.
Anyway, mojito doesn't actually exist and is simply the base of the ROM for sunny.
It was a bad assomption... and thanks for these info. :)
 
  • Like
Reactions: JiaiJ
Hello, Redmi Note 10 has two codenames:

sunny = India-exclusive model of the phone
(EDIT: sunny = Global/International model of the phone, without NFC support)

mojito = Global/International model of the phone
(EDIT: mojito = Not released model of the phone, with NFC support)

;)

EDIT: Edited/corrected infos, thanks to @Igor Eisberg :)
ahm I can use TWRP even it's not official? sunny TWRP?
for redmi note 10?
 
Hi i have Umi with 12.5.5 and i have issues with Bluetooth...it connects with all my tws (not xiaomi), i can hear others very well but they cannot hear me well and very deep....the same tws i tried with other phone and they work flawlessly....i tried absolute volume and nothing changes...never had this issue with previous stable roms....any ideas?
 
STABLE RELEASE

MIUI 12.5

https://androidfilehost.com/?w=files&flid=321331
https://sourceforge.net/projects/xi...files/xiaomi.eu/MIUI-STABLE-RELEASES/MIUIv12/

3upA0cd.png


Installation:

Xiaomi devices:

  • Install TWRP via Fastboot mode, then install our ROM
  • Code:
    fastboot flash recovery twrp.img
    fastboot boot twrp.img
  • TWRP Recovery TWRP
  • For ROOT install Magisk (may cause lags and fingerprint issue) in TWRP and reboot one more time after install to get rid of system lags

Hello,
I'm sorry if I reply here but I'm asking you why you are the oldest user of the group and I think you have the right solution to my particular problem.
I hope I'm not intrusive.
I followed all your simple guide but after the installation (via TWRP) of the stable miu12 on my little F3 the phone is back in FASTBOOT and following the restart of the TWRP (from Powershell) it tells me that I have no system.

Never happened with the many other xiaomi that I have owned.

I tried to follow other guides posted here but the Poco F3 does not install any Eu roms (even using usb-otg) and does not even start the original rom.

What do you advise me to do?

Thank you
 
Hello,
I'm sorry if I reply here but I'm asking you why you are the oldest user of the group and I think you have the right solution to my particular problem.
I hope I'm not intrusive.
I followed all your simple guide but after the installation (via TWRP) of the stable miu12 on my little F3 the phone is back in FASTBOOT and following the restart of the TWRP (from Powershell) it tells me that I have no system.

Never happened with the many other xiaomi that I have owned.

I tried to follow other guides posted here but the Poco F3 does not install any Eu roms (even using usb-otg) and does not even start the original rom.

What do you advise me to do?

Thank you
Don't use powershell, use cmd. Download the fastboot version rom, 12.5.1, boot into fastboot, use the automatic .bat and let it install itself. Boot the phone, set a pin or pattern so u can decrypt data in twrp, boot into fastboot and fastboot boot the twrp img. After that, update to the latest version of xiaomi.eu via twrp.

Enviado do meu M2012K11AC através do Tapatalk
 
Why didn't you enable the new volume panel and the new power menu in the stable version for lavender? Like you did in the beta version

Edit: I don't mean to sound ungrateful I'm just wondering
Sent from my Redmi Note 7 using Tapatalk
d16226d91c6904b94627a9cffbc956a0.jpg
d428d22e58701367f7ebc1917de31314.jpg
b56d1f1bb58317fcb9bbfa7470128efa.jpg
 
Why didn't you enable the new volume panel and the new power menu in the stable version for lavender? Like you did in the beta version

Edit: I don't mean to sound ungrateful I'm just wondering
Sent from my Redmi Note 7 using Tapatalk
d16226d91c6904b94627a9cffbc956a0.jpg
d428d22e58701367f7ebc1917de31314.jpg
b56d1f1bb58317fcb9bbfa7470128efa.jpg
Go wonder on the official Xiaomi forums, this is not our problem, rather Xiaomi's decision, same as with Mi 8 and probably every Android 10 device.
 
Go wonder on the official Xiaomi forums, this is not our problem, rather Xiaomi's decision, same as with Mi 8 and probably every Android 10 device.
I'm just saying that you enabled this features in the beta version why didn't you enabled it in the stable version?

Sent from my Redmi Note 7 using Tapatalk
 
I'm just saying that you enabled this features in the beta version why didn't you enabled it in the stable version?

Sent from my Redmi Note 7 using Tapatalk
1) Because Stable ROMs are not experimental.
2) Because the new power menu doesn't work correctly on Android 10.
3) Because it's not really a problem at all.
 
1) Because Stable ROMs are not experimental.
2) Because the new power menu doesn't work correctly on Android 10.
3) Because it's not really a problem at all.
Ok thanks for replying and thanks for this great ROM

Sent from my Redmi Note 7 using Tapatalk
 
hi
i installed 12.5.4 xiaomi.eu stable rom on my poco f3.
how i can install weekly rom?

Sent from my M2012K11AC using Tapatalk
 
hi
i installed 12.5.4 xiaomi.eu stable rom on my poco f3.
how i can install weekly rom?

Sent from my M2012K11AC using Tapatalk
It is reported a clean flash is mandatory, but you can try a dirty one and if no issue that's fine.
A good feedback for this common request is welcome.
Please back up your personal data....
 
It is reported a clean flash is mandatory, but you can try a dirty one and if no issue that's fine.
A good feedback for this common request is welcome.
Please back up your personal data....
Thanks for the tips. I will do dirty flash.

Sent from my M2012K11AC using Tapatalk
 
My device board name is "Haydnin", i tried installing the fastboot rom for mi11i, but it says "This package is for "haydn" devices."
can i edit the windows_fastboot_first_install_with_data_format.bat, if yes than what should i delete or add?
 
My device board name is "Haydnin", i tried installing the fastboot rom for mi11i, but it says "This package is for "haydn" devices."
can i edit the windows_fastboot_first_install_with_data_format.bat, if yes than what should i delete or add?
If you open it, it's so easy to find what is to remove.
BUT AT YOUR OWN RISK!.....
 
  • Like
Reactions: Poney70
My device board name is "Haydnin", i tried installing the fastboot rom for mi11i, but it says "This package is for "haydn" devices."
can i edit the windows_fastboot_first_install_with_data_format.bat, if yes than what should i delete or add?
We never said that we support Indian devices.
 
Don't use powershell, use cmd. Download the fastboot version rom, 12.5.1, boot into fastboot, use the automatic .bat and let it install itself. Boot the phone, set a pin or pattern so u can decrypt data in twrp, boot into fastboot and fastboot boot the twrp img. After that, update to the latest version of xiaomi.eu via twrp.

Enviado do meu M2012K11AC através do Tapatalk

Automatic .bat doesn't work on my Poco F3.

I solved it by flashing the original ROM ( using Mi flash tool) and then running Twrp with windows powershell commands.

Strange what happened to me.
yet I had set the PIN and restarted the phone but probably data in TWRP was encrypted.

Thanks anyway
 
Last edited:
Status
Not open for further replies.

Similar threads