MIUI 13 MIUI 13 STABLE RELEASE


Status
Not open for further replies.
Jackwu696 said:
Hello, I wish to inform that on MI 10 Umi latest zip, after unpacking the fastboot installation scripts are nowhere to be found (attached a picture) Can anyone confirm? Does that mean the latest update can be flashed via TWRP instead @ingbrzy ? Thank you for all assistance
Click to expand...
look here and try to use the search function…
xiaomi.eu

[HowTo] Install Recovery image

How to install a xiaomi.eu recovery image Because of more and more working TWRP or OrangeFox on MIUI13 Android12 a little How To and here we go .... Unlock your device (only once) - you need to unlock bootloader -> a small [howto] to unlock bootloader Install Tools and Drivers - install USB...
xiaomi.eu xiaomi.eu

Fastboot or Recovery rom
- xiaomi.eu_multi_MI10Ultra_V12.5.10.0.RJJCNXM_v12-11.zip -> no fastboot in filename -> recovery rom / twrp
- xiaomi.eu_multi_MI10Ultra_V13.0.4.0.SJJCNXM_v13-12-fastboot.zip -> fastboot in filename -> fastboot rom
 
kumelkhan91 said:
Hi, im trying to flash the latest xiaomi.eu rom for note 11 using twrp from the guide provided, but i get an error 1: assert failed update dynamic partitions(package_extract_file(dynamic_partitions_op_list").
What could i be doing wrongly?
Click to expand...
Hi, I tried upgrading 2 Mi 11 Ultra from 12.5.20 stable to 13.0.13 stable.
1st phone is smooth. 2nd phone I got this error 1: assert failed update dynamic partitions(package_extract_file(dynamic_partitions_op_list").

Finally did it by using twrp->Wipe->Advanced Wipe->Data->Repair File system. Reboot, then successfully updated, so my case isn't terribly bad since I was about to give up as I don't want to format data. YMMV.
 
  • Like
Reactions: katerpanne and mozilaion
fordrwd4ever said:
Just edit the installation script in \META-INF\Google\android.
It's Updater-script.
Just remove the 1st line (so it starts with ui-print)

Then it will flash with twrp skkkk just fine.
Click to expand...
Wow this still a thing I thought this was loooong gone. Thanks
 
katerpanne said:
look here and use twrp for a12 not for a11 if you want install a12 rom. mostly a _12 is in filename instead of _11

xiaomi.eu

[HowTo] Install Recovery image

How to install a xiaomi.eu recovery image Because of more and more working TWRP or OrangeFox on MIUI13 Android12 a little How To and here we go .... Unlock your device (only once) - you need to unlock bootloader -> a small [howto] to unlock bootloader Install Tools and Drivers - install USB...
xiaomi.eu xiaomi.eu


i think your device is not in fastboot, not connected or no/wrong drivers

look here
xiaomi.eu

[HowTo] Install Fastboot image

How to install a xiaomi.eu fastboot image - Perhaps you have an update info on your phone -> Its only an info that an update is available - Update is only possible with fastboot / PC and not with TWRP and here we go .... - you need to unlock bootloader -> a small [howto] to unlock...
xiaomi.eu xiaomi.eu
Click to expand...
The device was conected and in fastboot. What do you mean with wrong drivers?? How do I know wich one is the right one??
Thanks for help
 
Hulk89 said:
The device was conected and in fastboot. What do you mean with wrong drivers?? How do I know wich one is the right one??
Thanks for help
Click to expand...
read my howto…. and if you have further questions, tell us in detail what you did and where is your challenge in the howto topic

this is not a children chat group….
 
Last edited:
  • Like
Reactions: Gregor-kamilaki
mozilaion said:
HOW is it not working? How do you want to be helped if you provide absolutely no information at all about your issue?

Just a guess - did you really format /data? When you have to type "yes"?
If yes, I guess you should revert to the TWRP which has been working fine before (for MIUI12).
Click to expand...
1. I installed MIUI 13 from TWRP. Errors came as shown in my first post and phone went to bootloop ( bootloop where phone restarts again and again).
2. Since MIUI 13 was not working, i decided to go back to MIUI 12.5. I was told to install MIUI 12.5 with format /data which i did. After restarting the phone was stuck at MIUI logo. Kept waiting for good 45min but it wasnt going ahead of MIUI logo. Restarted and waited again 30 min. Still at MIUI logo.
3. When above 2 didnt work, I thought of changing recovery and installed Orange Beta (Latest) and flashed MIUI 13. This time the process went smooth and got installed. I also did format /data after that. But the issue is same, phone is stuck at MIUI logo. It is not moving ahead of that.
4. I also installed 12.5 and did format/data on OrangeFox as well but phone is still stuck on MIUI logo.

One thing that i noticed on 3 laptops. Whenever i connect my phone with 3 of my laptops in fastboot mode, the laptops says that
The last USB device you connected to this computer has malfunctioned and windows doesn't recognize it
I install Qualcom driver before connecting phone to laptops and tried all USB ports and two different cables
 
saadtariq73 said:
1. I installed MIUI 13 from TWRP. Errors came as shown in my first post and phone went to bootloop ( bootloop where phone restarts again and again).
2. Since MIUI 13 was not working, i decided to go back to MIUI 12.5. I was told to install MIUI 12.5 with format /data which i did. After restarting the phone was stuck at MIUI logo. Kept waiting for good 45min but it wasnt going ahead of MIUI logo. Restarted and waited again 30 min. Still at MIUI logo.
3. When above 2 didnt work, I thought of changing recovery and installed Orange Beta (Latest) and flashed MIUI 13. This time the process went smooth and got installed. I also did format /data after that. But the issue is same, phone is stuck at MIUI logo. It is not moving ahead of that.
4. I also installed 12.5 and did format/data on OrangeFox as well but phone is still stuck on MIUI logo.

One thing that i noticed and 3 laptops. Whenever i connect my phone with 3 of my laptops in fastboot mode, the laptops says that
The last USB device you connected to this computer has malfunctioned and windows doesn't recognize it
I install Qualcom driver before connecting phone to laptops.
Click to expand...
do you have installed magisk, which twrp did you use and so on…
here is a howto…
xiaomi.eu

[HowTo] Install Recovery image

How to install a xiaomi.eu recovery image Because of more and more working TWRP or OrangeFox on MIUI13 Android12 a little How To and here we go .... Unlock your device (only once) - you need to unlock bootloader -> a small [howto] to unlock bootloader Install Tools and Drivers - install USB...
xiaomi.eu xiaomi.eu
 
  • Like
Reactions: JakSpoon
katerpanne said:
do you have installed magisk, which twrp did you use and so on…
here is a howto…
xiaomi.eu

[HowTo] Install Recovery image

How to install a xiaomi.eu recovery image Because of more and more working TWRP or OrangeFox on MIUI13 Android12 a little How To and here we go .... Unlock your device (only once) - you need to unlock bootloader -> a small [howto] to unlock bootloader Install Tools and Drivers - install USB...
xiaomi.eu xiaomi.eu
Click to expand...
never used magisk
I actually cannot recall exact twrp name it was some
dr lwin 0.5.X.X sort of name.
 
Last edited:
New stable ROM update for Mi 11 Pro is available only with TWRP.
Do it mean that updating in fastboot mode is not going to be needed anymore? Next updates for this device only over TWRP?
 
Last edited:
There is a bug with mi 11 (Venus) 13.0.9, every morning my phone is running at 60hz even though it's set to 120hz in the settings, I have to switch back and forth to make it work again.
It seems to happen right after my schedule battery saving mode is deactivated.
 
MI 10
I update to 13.07 fastboot. Booting Ok. But on device info I still read 13.06. Why?
 
Last edited:
Hı friends
I installed mi12s ultra stable rom. Everything is very good, but mobile data and internet sometimes arrive late. There is no problem with wifi. Has anyone come across a similar situation?
 
After I enabled Ultra Batery Saving Mode for a night (then disabled it), device gestures are laggy. I have rebooted it many times and even changed theme back to original.

Gestures can take up to half a second to register and they are not smooth. They were super smooth before enabling ultra battery saving mode. I tried enabling it and disabling it as well, didn't get solved.

Does anyone know what it could be?

Device: Mi 10T Lite 13.0.6, A12
 
  • Like
Reactions: IntegratedGraphics
Hello,
First of all thank you for all you bring to us through this website !

Then, I've a little issue with the last stable update on Mix 4 (Odin)
I already installed the previous stable one under fastboot mode.
I know that this one is under recovery mode.
I installed TWRP version 3.6.2_12-0 all is done and functional but when I try to install the last update (previously downloaded into the phone), I've this message :

"Attempting to decrypt FBE for user 0...
User 0 Decrypted Successfully
Data successfully decrypted
Updating partition details...
...done
Updating partition details...
...done
Full SELinux support is present.
MTP Enabled
Installing zip file '/sdcard/xiaomi.eu_multi_MIX4_V13.0.8.0.SKMCNXM_003763de54_v13-12.zip'
E3004: This package is for "odin" devices; this is a "missi".
Updater process ended with ERROR : 1
Error installing zip file '/sdcard/xiaomi.eu_multi_MIX4_V13.0.8.0.SKMCNXM_003763de54_v13-12.zip'

My phone is unlocked and I removed the security password maybe that could block it... (digital and numbers)

Does someone has an idea that could help me to install it ?

I'm looking forward your answer(s)
BR
 
The issue is that my phone is a MIX4 (odin) and I downloaded all in that sense...
I haven't got any problem with the previous one under fastboot mode and I took the Odin one...
This is the reason why I'm a little bit lost...
 
Jctatis said:
Flashed the 5.6 recovery couldn't make it work, not even with the work around to update from 13.xx.4 to .6

Read some pp have Issue with the 5.6 found the 3.7t a12 vili skkkk... Or are there other one that actually work?
Really miss the fastboot updates were less of a hassles and that one doesn't bother any other users
Click to expand...
The 3.7t version does identify the phone correctly as Xiaomi 11T Pro (vili)
So you should be good to go.

It's at XDA Developers forum :
forum.xda-developers.com

Install TWRP for Xiaomi 11T Pro

Perform this at your own risk. You might LOSE all data on your phone. ( I'm not responsible for any damage to your device ) This guide will walk you through the process of installing TWRP on your Xiaomi 11T Pro. READ THIS FIRST: You may brick...
forum.xda-developers.com forum.xda-developers.com
 
ntelas said:
After I enabled Ultra Batery Saving Mode for a night (then disabled it), device gestures are laggy. I have rebooted it many times and even changed theme back to original.
Gestures can take up to half a second to register and they are not smooth. They were super smooth before enabling ultra battery saving mode. I tried enabling it and disabling it as well, didn't get solved.
Does anyone know what it could be?
Device: Mi 10T Lite 13.0.6, A12
Click to expand...

Maybe you have the battery mode set to battery saver?

Settings > Battery and Performance
Below the box showing the remaining time, there is a bar with three options.
Check if you have the central one checked
 
xiaomi.eu_multi_MI10_V13.0.7.0.SJBCNXM_v13-12.zip

It is not fastboot. How to proceed? Procedure changes every year :/

This time TWRP updater menu?

Once I had the recovery now only the stock: miui recovery 5.0

reboot
wipe data
connect with mi assistant
safe mode

Can it be done directly by choosing the update package locally?
Any help installing a new recovery?

tnks
 
Last edited:
Status
Not open for further replies.

Similar threads

ingbrzy
  • Sticky
HyperOS 2.0 HyperOS 2.0 STABLE RELEASE
Replies
276
Views
106K
HyperOS
PervizMikail
PervizMikail
ingbrzy
  • Locked
HyperOS 1.0 24.7.28 (Final)
Replies
292
Views
280K
HyperOS
Igor Eisberg
Igor Eisberg
ingbrzy
  • Locked
HyperOS 1.0 24.7.1
Replies
54
Views
42K
HyperOS
Mistery88
M
ingbrzy
  • Locked
HyperOS 1.0 24.7.22/25/26
Replies
51
Views
39K
HyperOS
Ahaba
A
ingbrzy
  • Locked
HyperOS 1.0 24.7.15/17
Replies
87
Views
44K
HyperOS
KGVER
KGVER
Top Bottom
Back