SP Flash tool guide - Unbrick your device


ingbrzy

Xiaomi.eu Project Leader
Staff member
Feb 11, 2012
11,541
322
Unbrick Guide For Xiaomi Redmi Note PRO WCDMA

- Download this package + Driver

- Unpack


- run flash_tool.exe

- load MT6592_Android_scatter.txt

- Select DOWNLOAD ONLY and NEVER set FORMAT..!!!

nbzwj2Y.png


- Plug in you device without battery to the PC

- Press DOWNLOAD

- Done
 
Last edited:
try leave ANDROID + CACHE only..
 
Last edited:
when I connect the phone is seen as lenovo A820, is also seen by the full screenshot
 
the phone will not turn on and will not charge, the same error message of sptools is:

BROM ERROR : S_DL_GET_DRAM_SETTING_FAIL (5054)
[EMI] Obtain DRAM failed!
[HINT]:
Please check your load matches to your targer which is to be downloaded.
 
the phone is currently dead. does not turn on then there is nothing to be completely rewritten. When I connect it to the PC without a battery is recognized regularly. when I download with sp flash tool, the red bar reaches 100% but then do not write anything and gives me the error message:
BROM ERROR : S_DL_GET_DRAM_SETTING_FAIL (5054)
[EMI] Obtain DRAM failed!
[HINT]:
Please check your load matches to your targer which is to be downloaded.
 
When I connect my note to pc without battery it connects and disconnects? Tried to install drivers but it disconnects so quickly but i thing they are installed. Now i tried to follow this steps when i connected phone and quickly pres download when i heard sound that is connected and it downloaded something and now it works! Thanks SOOO MUCH!!! You are the best!
 
Last edited:
Hi.
Recently I bought redmi note wcdma pro but I hadn't installed the uploader apk in the system so I wanted to install a new soft . But after several attempts, the phone didn't turn on , does not respond to the charger .
MediaTek DA USB VCOM Port ( COM8 ) disappears and appears approximately every minute in Device Manager. I tried to follow the instructions which is written here but it stops at the moment what Gaslaw " BROM ERROR: S_DL_GET_DRAM_SETTING_FAIL ( 5054 )
[ EMI ] Obtain DRAM failed!
[ HINT ] :
Please check your load Matches to your Targer : which is to be downloaded . "
I installed the drivers again and now I have another problem :
" BROM ERROR: S_FT_ENABLE_DRAM_FAIL ( 4032 )

[ EMI ] Enabled DRAM failed!
[ HINT ] :
Please check your load Matches to your target which is to be downloaded . "

Error occurs regardless of whether or not I put the battery .
It looks something like this:
To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Before I started to change the soft i had made copy of the phone memory without battery by "hdd raw copy" program but now the program does not see the phone memory when i connect phone to my computer
 
Last edited: