MIUI 13 MIUI 13 STABLE RELEASE

[QuagmireHu]

Once again.. How to install the update on a Xiaomi 12 phone if there is no CMD command line and the installation guide says that it can only be done in fastboot mode

and the latest update is not a TWRP installer, but a winrar archive

 

[gogocar62]

You already received an answer with instructions in your previous question. Did you read it?

https://xiaomi.eu/community/threads/miui-13-stable-release.64441/post-666061

 

[ekonstadoudakis]

Just installed latest ROM through initial twrp to my Xiaomi 12 Pro and found this shower mode!? My mobile became waterproof!?

 

[michelleDeko]

https://xiaomi.eu/community/threads/switch-from-fastboot-to-recovery-rom.66440/post-665291

You already received an answer with instructions in your previous question. Did you read it?

https://xiaomi.eu/community/threads/miui-13-stable-release.64441/post-666061

I tried this right now with my Xiaomi Mi 11 Pro and it couldnt install because of a Error 1.

 

[robertoc1982]

You already received an answer with instructions in your previous question. Did you read it?

https://xiaomi.eu/community/threads/miui-13-stable-release.64441/post-666061

But... xiaomi 12 is not a poco F3

Also me not understanding how to flash Xiaomi 12 ROM --> can't find xiaomi 12 in twrp.me

 

[gogocar62]

michelleDeko​

Reboot into TWRP and install the ROM. If it ends with error 1. repeat the process.

 

[Bec de Xorbin]

I tried this right now with my Xiaomi Mi 11 Pro and it couldnt install because of a Error 1.

Reboot recovery over and over again until it installs.

 

[michelleDeko]

michelleDeko​

Reboot into TWRP and install the ROM. If it ends with error 1. repeat the process.

system_root couldnt be mounted (No such file or directory)

same with "system_ext" and "product"

 

[gogocar62]

But... xiaomi 12 is not a poco F3

Also me not understanding how to flash Xiaomi 12 ROM --> can't find xiaomi 12 in twrp.me

The update procedure works the same on Mi 11 /12 / Poco F3 / etc.
TWRP

 

[Bec de Xorbin]

system_root couldnt be mounted (No such file or directory)

same with "system_ext" and "product"

Reboot and try to install. Repeat if needed. It will work eventually. It took me about 5 reboots, but it may take less or more.

 

[QuagmireHu]

But... xiaomi 12 is not a poco F3

Also me not understanding how to flash Xiaomi 12 ROM --> can't find xiaomi 12 in twrp.me

finally someone who understands the problem and doesn't make suggestions that can't be implemented

 

[QuagmireHu]

You already received an answer with instructions in your previous question. Did you read it?

https://xiaomi.eu/community/threads/miui-13-stable-release.64441/post-666061

not iso file or img but winrar

 

[katerpanne]

not iso file or img but winrar

[HowTo] Install Recovery image

How to install a xiaomi.eu recovery image Because of more and more working TWRP or OrangeFox on MIUI13 Android12 a little How To and here we go .... Unlock your device (only once) - you need to unlock bootloader -> a small [howto] to unlock bootloader Install Tools and Drivers - install USB...

xiaomi.eu

 

[QuagmireHu]

[HowTo] Install Recovery image

How to install a xiaomi.eu recovery image Because of more and more working TWRP or OrangeFox on MIUI13 Android12 a little How To and here we go .... Unlock your device (only once) - you need to unlock bootloader -> a small [howto] to unlock bootloader Install Tools and Drivers - install USB...

xiaomi.eu

How to put TWRP on the phone? According to my acquaintance, it is no longer the same as, for example, in the case of the MI 10T Pro

 

[DrAnubis]

system_root couldnt be mounted (No such file or directory)

same with "system_ext" and "product"

Like i wrote at page 167. I got the same Error. click reboot recovery. now at miui recovery 5 menu reboot menu and press lower and power to came back to fastboot menu. Install the NEW TWRP 5.1 from 02.08.22 (3.9 is older) AGAIN and it worked. Whiped davlik after install, reboot system and it works all fine.

 

[katerpanne]

How to put TWRP on the phone? According to my acquaintance, it is no longer the same as, for example, in the case of the MI 10T Pro

its described in the howto… you only have to read it

 

[pjgoncalves]

Updated properly MI11U with this TWRP https://androidfilehost.com/?w=files&flid=321510.

Thank you!

 

[QuagmireHu]

its described in the howto… you only have to read it

thank you very much everyone for your help. I apologize for the misunderstanding

 

[taz80000]

Hello everyone being in 13.0.8.0 stable by installing in ota since this version it will pass where you must first install twrp?
Thanks

 

[jhs39]

I have been trying to install the new recovery ROM update on my MI 11 and I can not get TWRP to decrypt the data on my phone. I am using the recommended version of TWRP from this thread and it does not decrypt. It doesn't ask for my PIN number when TWRP boots up and if I try to decrypt data through the Mount Partition menu my PIN number is rejected. I have rebooted my phone more than a dozen times and it doesn't matter. Do I need to remove my PIN to do the installation since TWRP can't decrypt the data? Do I need to start over by reflashing the last version of the fastboot ROM with data format, set up my pin, and then immediately try to update to the recovery ROM? Do I wait until there's another version of TWRP? Can anyone who successfully updated to the latest recovery ROM on their MI 11 give me some help? I don't care if the steps are supposed to be the same because each MI 11 model uses a different TWRP build and each MI 11 ROM has different code so what is working for the MI 11 Ultra might not be working for the MI 11 even if in a perfect world all of the installation and troubleshooting steps should be exactly the same.

 

[katerpanne]

I have been trying to install the new recovery ROM update on my MI 11 and I can not get TWRP to decrypt the data on my phone. I am using the recommended version of TWRP from this thread and it does not decrypt. It doesn't ask for my PIN number when TWRP boots up and if I try to decrypt data through the Mount Partition menu my PIN number is rejected. I have rebooted my phone more than a dozen times and it doesn't matter. Do I need to remove my PIN to do the installation since TWRP can't decrypt the data? Do I need to start over by reflashing the last version of the fastboot ROM with data format, set up my pin, and then immediately try to update to the recovery ROM? Do I wait until there's another version of TWRP? Can anyone who successfully updated to the latest recovery ROM on their MI 11 give me some help? I don't care if the steps are supposed to be the same because each MI 11 model uses a different TWRP build and each MI 11 ROM has different code so what is working for the MI 11 Ultra might not be working for the MI 11 even if in a perfect world all of the installation and troubleshooting steps should be exactly the same.

look here…

https://xiaomi.eu/community/threads/howto-install-recovery-image.66211/#post-662483

 

[Peter Jumpy]

Hi guys!

HMNote 10 pro,i flashed the miui 13 with A12 on the device, it s working flawless. I checked for update a few minutes ago,,so ii found a newer version.. Question is, can i update from the system, or need flash it via fastboot again?
THnx

 

[katerpanne]

Hi guys!

HMNote 10 pro,i flashed the miui 13 with A12 on the device, it s working flawless. I checked for update a few minutes ago,,so ii found a newer version.. Question is, can i update from the system, or need flash it via fastboot again?
THnx

if there is fastboot in the fieame -> fastboot
if there is no fastboot in the filename -> twrp

 

[kvbvs]

can we expect fastboost version in future?

 

[gogocar62]

If there is a functional TWRP for the given device, only the recovery ROM will be issued.
If TWRP stops working when you upgrade to Android 13 (or for some other reason), a fastboot ROM will be released.