MIUI 12.5 20.12.28/29


Do you like this MIUI version?

  • Total voters
    413
Status
Not open for further replies.
gkalen said:
Hello, Bro
Thanks for your information.
I also have same decryption issue on my TWRP.
Can I directly upgrade from my current TWRP 3.3.2b to your suggested TWRP 3.5.A9-01-01-2021.img file?
And anything need to do?

Thanks and Regards,
Paing
Click to expand...
You can flash this twrp.img through your existing twrp and you can proceed to update..
You can use fastboot commands also , whatever you want ..

EDIT
We have working twrp's and tested for below devices..
Apollo ( mi 10 T/Pro /HMK30S ) ..
Surya ( poco x3 nfc )..
Toco ( mi note 10 lite )..
Monet ( mi 10 lite 5G )..
Joyeuse ( Redmi note 9 pro EU )..
[/QUOTE]
Hi! Where can I get these twrps? I need it for my 10T, the normal, not pro
 
Device xiaomi mi note 10
When I install magisk 20.4 i catch bootloop. Clean install. How to fix this problem?
 
robertb_45 said:
EDIT
We have working twrp's and tested for below devices..
Apollo ( mi 10 T/Pro /HMK30S ) ..
Surya ( poco x3 nfc )..
Toco ( mi note 10 lite )..
Monet ( mi 10 lite 5G )..
Joyeuse ( Redmi note 9 pro EU )..


Hi! Where can I get these twrps? I need it for my 10T, the normal, not pro
Click to expand...
Take a look at post #504 on previous page ..


@y6vmeq
Download 21.2 version ..
 
Any solution for this error in themes app? I can't download anything. Thx
Screenshot_2021-01-01-22-04-50-610_com.android.thememanager.jpg


Gesendet von meinem MI 3W mit Tapatalk
 
On Mi9 after dirty install everything works fine and flawlessly!

I did previously install TWRP version 3.5.0_9-0 from here:

Download twrp-3.5.0_9-0-cepheus.img

Download page for twrp-3.5.0_9-0-cepheus.img
dl.twrp.me

Thanks to developers hard work!
Happy new year!

Sent from my MI 9 using Tapatalk
 
I come with my apollopro from the EEA Stock Rom and want to test 12.5 without magisk.
Should I use the twrp_apollo_MI10T-PRO_3.5.A10_01-01-2021_bl.img?
Can I flash this twrp directly into fastboot or do I just have to boot into twrp with fastboot?
 
gkalen said:
There is no twrp issue for CMI ..
The newest twrp is here ..
androidfilehost.com

TWRP-1206-CMI-wzsx150.img | by gkalen for Xiaomi

Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com androidfilehost.com
You have to flash the twrp 1206 through fastboot or through your existing twrp ..
Then you can update as you wish , you can enter twrp and choose Install , find the zip and swipe to flash ..
Or you can update via OTA also ..
Disable fingerprints before you start , though you won't have problems because you're with an old rom version with Android 10 ..
Click to expand...

Thanks Bro.

Should i do follow below steps to flash Twrp 1206.
1) Enter existing twrp by holding power + volume.
2) Select install, choose Twrp 1206 img file and swipe to flash.
3) Reboot to system.

After flashing Twrp 1206 should i do following steps.
1) Download Rom 20.12.29 to phone storage.
2) Go to updater select choose package and install.
 
After clean install on Redmi K30 5g Wifi loose connection all the time. It is going well for some time and then not working. I have to but off and on the wifi, then it works again for some time before loosing again.

The rest of the new version I like very mutch. Thanks!!
 
Hi,

I'm new owner of mi 10.
I have unlock bootloader already, if i want to install xiaomi.eu rom i need to use usb otg or there is any wornking TWRP
I'm now on global 12.0.6
 
MMAS1 said:
Thanks Bro.

Should i do follow below steps to flash Twrp 1206.
1) Enter existing twrp by holding power + volume.
2) Select install, choose Twrp 1206 img file and swipe to flash.
3) Reboot to system.

After flashing Twrp 1206 should i do following steps.
1) Download Rom 20.12.29 to phone storage.
2) Go to updater select choose package and install.
Click to expand...
It depends on what is your installed rom now..
If it is previous rom 20.12.10 , yes you can do that and update with OTA ..
The problem is that if your rom now is one of older roms which has the recovery issue you can't do that , you need to boot to 1206 twrp through fastboot mode and with command..
fastboot boot twrp.img
Then flash the new rom and from next update you can do what you said exactly and update with OTA ..

EDIT
Just remember that you have to delete fingerprint and pin number or to use a pattern.. or else twrp will not decrypt and flash won't proceed ..
 
Last edited:
Hwinz said:
After clean install on Redmi K30 5g Wifi loose connection all the time. It is going well for some time and then not working. I have to but off and on the wifi, then it works again for some time before loosing again.

The rest of the new version I like very mutch. Thanks!!
Click to expand...
What TWRP do you use?
 
  • Like
Reactions: Hwinz
T
gkalen said:
It depends on what is your installed rom now..
If it is previous rom 20.12.10 , yes you can do that and update with OTA ..
The problem is that if your rom now is one of older roms which has the recovery issue you can't do that , you need to boot to 1206 twrp through fastboot mode and with command..
fastboot boot twrp.img
Then flash the new rom and from next update you can do what you said exactly and update with OTA ..

EDIT
Just remember that you have to delete fingerprint and pin number or to use a pattern or else twrp will not decrypt and flash won't proceed ..
Click to expand...
Thanks. It is really helpful. I am using 20.06.18.

1) Enter fastboot holding power - volume key.
2) Enter command fastboot devices.
3) Fastboot boot twrp 1206.img.
4) Select install, select rom and swipe to flash.
5) wipe cache and dalvik.
6) the reboot to system.
 
Fugefigef said:
Hi,

I'm new owner of mi 10.
I have unlock bootloader already, if i want to install xiaomi.eu rom i need to use usb otg or there is any wornking TWRP
I'm now on global 12.0.6
Click to expand...
You should be familiiar with the Fastboot process, and have available TWRP 3.4.2b-1206, together with the ROM you want to install, on your PC.
You should only boot using this TWRP version through Fastboot - never flash.
Boot into this TWRP
Format data (confirm by entering 'yes')
Reboot back into recovery
Enable MTP (under Mount)
This will enable you to upload the new ROM onto your phone.
Install the new ROM,
Reboot to system.
 
  • Like
Reactions: lumiru, gkalen and Fugefigef
MMAS1 said:
T

Thanks. It is really helpful. I am using 20.06.18.

1) Enter fastboot holding power - volume key.
2) Enter command fastboot devices.
3) Fastboot boot twrp 1206.img.
4) Select install, select rom and swipe to flash.
5) wipe cache and dalvik.
6) the reboot to system.
Click to expand...
Yes it's good like that or ..
If your current rom is 20.6.18 , you can install new twrp.img and you can proceed to update with OTA if you like .. you won't have problems with your current rom ..
 
Status
Not open for further replies.

Similar threads

ingbrzy
  • Sticky
HyperOS 2.0 HyperOS 2.0 STABLE RELEASE
Replies
666
Views
329K
HyperOS
TheSky
TheSky
ingbrzy
  • Locked
HyperOS 1.0 24.7.28 (Final)
Replies
292
Views
330K
HyperOS
Igor Eisberg
Igor Eisberg
ingbrzy
  • Locked
HyperOS 1.0 24.6.24/29
Replies
80
Views
37K
HyperOS
Noctis117
Noctis117
ingbrzy
  • Locked
HyperOS 1.0 24.7.1
Replies
54
Views
43K
HyperOS
Mistery88
M
ingbrzy
  • Locked
HyperOS 1.0 24.7.22/25/26
Replies
51
Views
44K
HyperOS
Ahaba
A
Top Bottom
Back