MIUI 12.5 20.12.28/29

[mvlad]

Want to Update my Mi9SE, I install the "xiaomi.eu_multi_MI9SE_20.12.28_v12-11.zip" with "TWRP twrp-3.5.0_9-0-grus.img" installed, i get this error Code in TWRP.
E3004: This package is for "grus" devices; this is a "":
Then the update proccess abort. The old MIUI 12 is working normaly. No issues.

It's an issue with the recovery. You're most likely on twrp 3.5.0, right? You can eithe use 3.4.0 or the one I use, SHRP 2.2 (2.3.2 doesn't boot into recovery; also shrp is no longer maintained for our device so if anything breaks in the future, use twrp 3.4.0).

The other way to get around this is to extract the rom zip on your device, and modify the installer script to no longer check for the device name (delete the first line). Then package it again and it should install.

 

[Kanber]

Hi ty for your hard work, poco f2 pro safety pass failed and like other person spotify button doesn't show, nfc doesn't work properly, sorry about my poor english

 

[Iain_B]

hi guys, tomorrow is the day, I will have permission from Xiaomi to unlock bootloader. where can I find the right twrp for Mi 10? tx to all

You must remember that there are problems with Mi 10 (umi) and TWRP. You must have an earlier version 3.4.0 (LittleTurtle2333) in recovery memory, and leave it there. You can only boot (NOT flash) from Fastboot with 3.4.2b-1206. It takes just over a minute to load and may take a short time for you to be able to input your pattern (not password). If you remember that, you can use it quite freely. I have been using it successfully all the time, booted from Fastboot.

Going from stable or stock to weekly beta you always have to format data partition.

You should be familiar with the Fastboot process, and have available TWRP 3.4.2b-1206, together with the ROM you want to install, on your PC.
You should only boot using this TWRP version through Fastboot - never flash.
Boot into this TWRP
Format data (confirm by entering 'yes')
Reboot back into recovery
Enable MTP (under Mount)
This will enable you to upload the new ROM onto your phone.
Install the new ROM,
Reboot to system.

Additional notes:
The command to boot into the TWRP should be:
fastboot boot recovery-TWRP-3.4.2B-1206-XIAOMI10-CN-wzsx150.img
There is often quite a delay before the TWRP starts, and sometimes a delay before you can enter your pattern.

 

[Sylar82]

I noticed that when i record video and try to play it the vedio sound is very low , mi 10 umi

 

[Cacun]

Hello,
How did you update to Weekly ROM version from Stable one?
Did you Disable Forced Encryption?

Hello,
Formatted data and used twrp-3.5.0_9-0-cepheus.

 

[Iain_B]

I noticed that when i record video and try to play it the vedio sound is very low , mi 10 umi

I have just tested mine, and the volume is low - yes I agree. There would be difficulty in hearing anybody, or anything, more than a few feet away.

 

[Leandrosson]

Hi developers!
Thanks for the nice work. Keep going!
I had an issue with NFC payment today. I couldn't pay either fix it. Any clue?
Thanks in advance.
BTW my phone is a k20 pro

 

[ddj123]

Chrome now working great!

Best Rom ever I flashed!

Thanks

RN7

 

[Poney70]

Hello,
Formatted data and used twrp-3.5.0_9-0-cepheus.

Then I don't know...

Hi developers!
Thanks for the nice work. Keep going!
I had an issue with NFC payment today. I couldn't pay either fix it. Any clue?
Thanks in advance.
BTW my phone is a k20 pro

=> https://xiaomi.eu/community/threads/20-12-28-29.59085/post-581009

 

[Gurkut]

after flash magisk with twrp its gone to fastboot. and i just reinstall img file for open mi 9 normally.

 

[Sablegod]

I had this issue when I was first going to global EU ROM. Official TWRP was having this error, so i used redispade version, which worked for Mi 9 SE and allowed to flash xiaomi.eu ROM. Dont know, if it will be ok when switching to weekly, you can try https://github.com/redispade/device_xiaomi_grus-twrp/releases

thank you for the fast reply... I will give it a try

 

[Krepsz]

I have just tested mine, and the volume is low - yes I agree. There would be difficulty in hearing anybody, or anything, more than a few feet away.

I agree Mi 10 UMI recorded video volume is low.

 

[Poney70]

after flash magisk with twrp its gone to fastboot. and i just reinstall img file for open mi 9 normally.

=> https://xiaomi.eu/community/threads/20-12-28-29.59085/post-579992

 

[Sylar82]

[Q

I agree Mi 10 UMI recorded video volume is low.

and its not only in camera app its on all apps like whatsapp and facebook too and its only in video the audio record is great

 

[Krepsz]

Somebody have huge battery drain on Mi10 Umi?

 

[gmarondel]

OK google not working for me,
Confirm?

Yes and it is Like a deja-vu. It was s problem some miui Version ago

 

[PPM-Droid]

Somebody have huge battery drain on Mi10 Umi?

No, can't confirm. After two days using I think a little bit less than last update.

 

[Iain_B]

Somebody have huge battery drain on Mi10 Umi?

No - I would not agree. It does also depend upon how it is set up, and how you leave it. I'll fully charge now, and leave it for a couple of hours and post the results later.

[Edit: I posted some results on 23rd December here, and they were good.]

 

[Cacun]

Good Night!
I was with the stable xiaomi.eu_multi_MI9_V12.0.6.0.QFACNXM_v12-10 everything worked fine including the fingerprint.
I updated to xiaomi.eu_multi_MI9_20.12.28_v12-11 and the fingerprint stopped working.
Can anyone help me ...

Good night.
I don't know how, but the fingerprint has returned to work.
I performed the following steps: I regressed to stable according to @geoorg:
1, Boot to twrp and click install
2, Select ROM zip
3, Swipe to confirm flash
4, After flashing don't reboot
5, Wipe dalvik and cache
6, Delete contents of "data / system / package_cache" using twrp file manager
7, Reboot device
8, Be patient for first boot
Needless to say, it always restarted for twrp.
Then flash the xiaomi.eu_multi_MI9_20.12.28_v12-11, with the same steps:
1, Boot to twrp and click install
2, Select ROM zip
3, Swipe to confirm flash
4, After flashing don't reboot
5, Wipe dalvik and cache
6, Delete contents of "data / system / package_cache" using twrp file manager
7, Reboot device
8, Be patient for first boot
The device reboot very well and I went to the settings / security and the fingerprint, the second time I put my finger, I moistened my fingertip (I had seen this in some post).
What is certain is that I managed to get the fingerprint up and running.

 

[Miko2007]

Somebody have huge battery drain on Mi10 Umi?

Yes i do.

 

[rysiekmirek]

wrong window, sorry

 

[rysiekmirek]

Hi, I need some help. I've just dirty flashed my mi 9 se (with WEEKLY 20.12.28 ). I've rebooted it once normally - was ok, then I have rebooted to recovery and phone entered into Fastbootloop. Anything I can do to reboot it normally? What to do?

Any way to install xiaomi eu ROM via "mi flash tool" maybe?

 

[diegochiva95]

Very good update for 9T, but on Spotify the icons have disappeared again

Enviado desde mi Mi 9T mediante Tapatalk

same mi 9 se, i try unistall and install again and not change

 

[Makc127]

[QUOTE = "joy427, сообщение: 579784, участник: 234297"]
Европейские разработчики действительно супер быстрые! Престижность
[/ QUOTE]
Да может и так, но сырая! После установки перезагрузки Фастребут и не тухнет.

 

[diegochiva95]

Hi, I need some help. I've just dirty flashed my mi 9 se (with WEEKLY 20.12.28 ). I've rebooted it once normally - was ok, then I have rebooted to recovery and phone entered into Fastbootloop. Anything I can do to reboot it normally? What to do?

Any way to install xiaomi eu ROM via "mi flash tool" maybe?

Hi friend, I had the same problem, I used this recovery and despite being very old it works perfectly on android 11 and without getting stuck in fastboot. try and you will see the change.