martn223000
Members
- 4 Apr 2020
- 33
- 20
MIUI 12.3 20.12.9/10
- Thread starter ingbrzy
- Start date
- Status
geoorg
Members
- 28 Sep 2020
- 1,814
- 297
lintern
Members
- 2 May 2020
- 136
- 40
I am on about the bar that you turn your Wi-Fi on/off, mobile data on/off and flashlight etc. The data usage is just under it.
geoorg
Members
- 28 Sep 2020
- 1,814
- 297
Ok, you mean control center?
There's a small triangle (bottom right) of the data usage toggle
Tap on it.
You have 3 options to choose
Mobile data, today's steps, and used today
If not using control center
Tap on the data usage
Tap on the gear icon (top right)
Toggle off data usage notification
Last edited:
lintern
Members
- 2 May 2020
- 136
- 40
As i said I've looked t
I've looked through data settings already there is no option to remove it from the control center
geoorg
Members
- 28 Sep 2020
- 1,814
- 297
I gave 2 options. (When you are Using control center and when not using control center)
And stated what is possible with each option
geoorg
Members
- 28 Sep 2020
- 1,814
- 297
Let me rephrase
If you are using the new control center
You have 3 options to choose
Mobile data, today's steps, and used today.
If using the old quick access
Tap on the data usage
Tap on the gear icon (top right)
Toggle off data usage notification
lintern
Members
- 2 May 2020
- 136
- 40
Yes and thanks for responding but I see no way off removing it following your instructions.
geoorg
Members
- 28 Sep 2020
- 1,814
- 297
lintern
Members
- 2 May 2020
- 136
- 40
I'm using the old style but after rebooting it's now not there so I don't know what was going on. Thanks for the help anyway.
@lintern, well I checked your issue and indeed there is a problem with the settings. I think I've found how to turn it off, but not how to turn it on (haha). If you tap a little bit right from the number of the data plan limit, it will (probably) put you in a settings panel where you'll be able to set the data limit, but also turn off this "bar" under/on quick settings. BUT, you might not be able to revert this change.. Thinking about it again, maybe by deleting the data of the settings app it will bring it back. (~Like in older OSes where you ~had to delete the settings app data to remove the developer options tab.)
It's weird that you can disable it , @geoorg told you exactly the steps ..
Take a look at screenshots ..
.. tap on data usage line and will enter here ..
.. now tap settings ( gear ) icon on top of the right corner ..
.. turn of this and it will become like that ..
.. it's easy , i can't understand where you confused ..Also, because ~since I installed the rom I didn't give much feedback, well, there you are:
Almost no issues with it. "Pro tip": if you enable usb debugging when transferring files, the files ~retain their last modified date which can be very helpful. It may not retain the date created, but eh, it's ~something.
I had to made about 150gb.. using both a wired amd wireless connection (with total commander lan plug in). Lol, it took me about 2 days to set up the phone, so I'm probably gonna be careful not to soft brick the phone...
With magisk props I used both the "Mi 10 Pro" and "Mi 10 Eu" names ~without any issues.
(this thread proved to be helpful: https://xiaomi.eu/community/threads/safetynet-failed-mi10-ultra-20-9-24.57748/).
Now the issues:
1)Screenshots taken in (probably) lossy jpg isntead of png format. At least give the people the option to choose. I found an app that takes screenshots with the button combo (root access needed) and saves then in png. But after checking them with the eye on a pc and with an online pic comparer there seems to be ~no difference in the pixels between the png and jpg version, so the app probably just convers the pic to png instead of recording it in png from the fisrt place.
2)The issue @lintern found.
3)It's kinda hard to toggle between personal and work profile. Yesterday there was an icon in quick settings that enabled this toggling, but today there isn't. (I think enabling work profiles emables the dual apps created). It may be that I changed the device name from "Mi 10 Pro" to "Mi 10 Eu" with magisk props module.
4)Cod mobile seems to be able to detect root access (if you leave it unhidden) and shuts down after ~30-120 seconds after booting the app. Though there is ~no message saying "root detected, disable it to play" and after checking the game tos it seems that they don't state that rooting is prohibited/bannable or something.
5)There's an app/tool with the initials LP which can do some modding on the phone (I think it can be used "illegally", even though the purpose of it is, I think, not illegall, so I'm ~not telling the name of the app). ~After giving it root access my phone was soft bricked and had to reinstall the rom. It's probably an android 11 issue (I think the app hasn't exactly adapted yet even if it get updated every ~2days). I fixed it by restricting root access to it. It may not work that well, but it ~doesn't brick my phone. Maybe I'll give it root access sometime when I'll have a good backup of my phone and enough time to set up the phome again if needed. (Pls tell me if you want me to remove the 5th point.)
Well, I think these ~are the things I wanted to point out so far.
Ps. Copying a pc .m3u playlist to the phone and changing the C:\Users etc. with storage/emulated etc., replacing the "\" with "/" and in short correcting the paths, you ~can easily import playlists (provided you put the songs on your phone as well).
Thank you people for the rom and the support!
Merry Christmas and a happy new year people!
Almost no issues with it. "Pro tip": if you enable usb debugging when transferring files, the files ~retain their last modified date which can be very helpful. It may not retain the date created, but eh, it's ~something.
I had to made about 150gb.. using both a wired amd wireless connection (with total commander lan plug in). Lol, it took me about 2 days to set up the phone, so I'm probably gonna be careful not to soft brick the phone...
With magisk props I used both the "Mi 10 Pro" and "Mi 10 Eu" names ~without any issues.
(this thread proved to be helpful: https://xiaomi.eu/community/threads/safetynet-failed-mi10-ultra-20-9-24.57748/).
Now the issues:
1)Screenshots taken in (probably) lossy jpg isntead of png format. At least give the people the option to choose. I found an app that takes screenshots with the button combo (root access needed) and saves then in png. But after checking them with the eye on a pc and with an online pic comparer there seems to be ~no difference in the pixels between the png and jpg version, so the app probably just convers the pic to png instead of recording it in png from the fisrt place.
2)The issue @lintern found.
3)It's kinda hard to toggle between personal and work profile. Yesterday there was an icon in quick settings that enabled this toggling, but today there isn't. (I think enabling work profiles emables the dual apps created). It may be that I changed the device name from "Mi 10 Pro" to "Mi 10 Eu" with magisk props module.
4)Cod mobile seems to be able to detect root access (if you leave it unhidden) and shuts down after ~30-120 seconds after booting the app. Though there is ~no message saying "root detected, disable it to play" and after checking the game tos it seems that they don't state that rooting is prohibited/bannable or something.
5)There's an app/tool with the initials LP which can do some modding on the phone (I think it can be used "illegally", even though the purpose of it is, I think, not illegall, so I'm ~not telling the name of the app). ~After giving it root access my phone was soft bricked and had to reinstall the rom. It's probably an android 11 issue (I think the app hasn't exactly adapted yet even if it get updated every ~2days). I fixed it by restricting root access to it. It may not work that well, but it ~doesn't brick my phone. Maybe I'll give it root access sometime when I'll have a good backup of my phone and enough time to set up the phome again if needed. (Pls tell me if you want me to remove the 5th point.)
Well, I think these ~are the things I wanted to point out so far.
Ps. Copying a pc .m3u playlist to the phone and changing the C:\Users etc. with storage/emulated etc., replacing the "\" with "/" and in short correcting the paths, you ~can easily import playlists (provided you put the songs on your phone as well).
Thank you people for the rom and the support!
Merry Christmas and a happy new year people!
Last edited:
Sadly, after this update TWRP changed to one that "fits" and data cannot be mounted. After trying to reflash TWRP to another, phone didn't even starts recovery, only fastboot. 
Bonjour à tous, a quand la prochaine bêta .....
bravo aux développeurs...
bravo aux développeurs...
LOLO9393
Members
- 8 Feb 2016
- 3,227
- 322
You are such lazy you can't read first page information?
When there, take time to read and apply forum rules.
Clear?
Merry Christmas
Please help as I'm incapable of solving this issue with TWRP not mounting and not letting me boot back to system: I noticed that TWRP didn't ask for password when I first booted into it. I didn't try going back to system and resetting the password, instead I switched mount mode to ext2 and back to extract and since then I have been unable to boot back to system. Now I'm just stuck here with wiping caches not doing anything. It does give me this error though, but I don't know what it means.
(Btw I have no idea why the interface is in Chinese. I can provided translation if needed for problemsolving but I've never set system language or twrp language to Chinese.)
(Btw I have no idea why the interface is in Chinese. I can provided translation if needed for problemsolving but I've never set system language or twrp language to Chinese.)
My phone is Redmi K30i (Please note that "i" is 48m camera), version is xiaomi.eu v12.0.3.0
Now have a new verion of stable rom Android 11 v12.1.4.0 through OTA, should I upgrade to new rom?
I have upgrade to Android 11 v12.0.7.0 before through OTA but the camera can't work normally.
Any suggestion upgrade to stable rom 12.1.4 and the camera can work normally?
Now have a new verion of stable rom Android 11 v12.1.4.0 through OTA, should I upgrade to new rom?
I have upgrade to Android 11 v12.0.7.0 before through OTA but the camera can't work normally.
Any suggestion upgrade to stable rom 12.1.4 and the camera can work normally?
Device is mi 10 or mi 10 pro , what exactly did you try to do ??
It's your first flash after unlocking bootloader ??
Did you saw anywhere to switch mount to ext2 ??
Device is cmi and ive now installed cmi TWRP1206 but still encrypted. I managed to MPT copy firmware into storage and hard install in TWRP but no luck rebooting to android still.
@oknametra @Darius LAD Do you have mi 10/mi 10 pro/mi 10 ultra?
If yes, then you should have probably read in the forum that you should boot in newer twrps (0206/1206) to do what you want to do (btw, I think this might be fixed on mi 10 pro). The one that comes with the rom (3.0.4) cant decrypt the data, so if you want it to work you'll probably havw to remove any password and such (I think it's said patterns are allowed).
Also, the newer twrps are unstable, so they ~mustn't be flashed (even though I accidentally did it..)., only be BOOTED. It may take a little while to boot into that, but ~just wait to get into twrp.
If yes, then you should have probably read in the forum that you should boot in newer twrps (0206/1206) to do what you want to do (btw, I think this might be fixed on mi 10 pro). The one that comes with the rom (3.0.4) cant decrypt the data, so if you want it to work you'll probably havw to remove any password and such (I think it's said patterns are allowed).
Also, the newer twrps are unstable, so they ~mustn't be flashed (even though I accidentally did it..)., only be BOOTED. It may take a little while to boot into that, but ~just wait to get into twrp.
It's first flash after unlock or not ??
Did you try to update rom version ??
As i can see you need to perform a format data , so if you already install the rom you can do a format data and reboot to system..
Wipe/ format data / .. type yes and hit enter
Then reboot to system ..
You will loose everything in internal memory after this ..
Edit
@Blastboom Strice
On CMI it's not like UMI , twrp is working fine and decrypt data without issues ..
Friend just followed his own procedure to flash ..
Last edited:
Lol, after a soft brick, to ~make a clean install I wiped cache, davlink cache and data, then wiped data, then did factory reset and flashed the rom (with otg). Afterwards, I wiped cache, davlink cache and data, then wiped data and then did a factory reset. I also had the magisk canary and it's beta zip which I flashed afterwards and wiped chache and davlink cache again.
(And baecause LP caused more bricks, in essense, I ~formated my phone ~25times that day.)
(Another edit kk @gkalen (thumbs up emojies, since I ~dunno how to post emojies here..).
(And baecause LP caused more bricks, in essense, I ~formated my phone ~25times that day.)
(Another edit
kk @gkalen (thumbs up emojies, since I ~dunno how to post emojies here..).
Last edited:
- Status
