MULTI 6.4.7


Do you like this MIUI version?


  • Total voters
    331
Status
Not open for further replies.
Hy @ingbrzy, in the Chinese stable stock Xiaomi has add the ability to unlock the app with the fingerprint sensor, why in the eu ROM this possibility is lost? Hennessy 7.2.5.0
 
So what is exactly different between the official MIUI from en.miui.con and this one? "Multilingual" doesn't tell me much since the official one also have more languages.
 
So we are minimum 3 members with same issue. 2 with MiNote and one with Mi3.
Please, first that find a solution do a detail post with instructions, please.
Same issue over here with a Redmi 2 pro (HM2014811). So one member more with the upgrade issue...
 
Look here
 

Attachments

  • Screenshot_2016-04-10-22-18-36_com.miui.securitycenter.png
    Screenshot_2016-04-10-22-18-36_com.miui.securitycenter.png
    182.2 KB · Views: 433
You could try to flash your phone with China ROM using miflash application by your computer. After that, you install twrp 25 February version, factory wipe and then install weekly ROM by twrp.

Stefano - Redmi2 16gb (2014813)
Hi Stefano,
Please can you provide more details?
Are you talking about the Chinese ROM available on the Redmi 2 TD page? (.../download-273.html#453)
The chinese ROM would be then : miui_HM2XTDPro_6.4.7_56e4c8ad84_5.1.zip
Or are you talking about xiaomi.eu_multi_HM2014813_V7.2.2.0.KHJCNDA_v7-4.4.zip ?

_ Then I should try to flash it using miFlash,
_ then install TWRP from February 25th, i.e. TWRP_HM2014813.zip,
_ then do a factory wipe,
_then install weekly ROM xiaomi.eu_multi_wt86047_6.4.7_v7-5.1.zip
Right?

Thanks for your help
Regards
 
Never mind, I solved it.
I found the fastboot chinese ROM for wt86047 on xiaomi web (which were none of my previous message), but I was not able to flash them properly.

_ In the end, I just started the phone in fastboot mode again,
_ then upload TWRP (wt86047-TWRP3.0.0-1_LP.zip) by USB from computer
_ once the phone enter TWRP, I went to wipe section, wiped to factory reset, but I also formatted the data partition
_ then I installed eekly ROM xiaomi.eu_multi_wt86047_6.4.7_v7-5.1.zip

After reboot, it took only a few seconds to see "android" at the bottom of the MI boot screen.
Then it took a bit longer, but the phone finally started, and now I am configuring everything again (oh the joy).

Regards
 
  • Like
Reactions: decadance
Hi, I have only 5 Gb on micloud storage, so the gallery uploads photos and videos
automatically, I woud like to upload only photos to micloud, and have my videos only in my sdcard storage. How can I do that?
Please let me know!:) tnks
 
Hi,
My Redmi2 TD (wt86047) is bricked since updating to xiaomi.eu_multi_wt86047_6.4.7_v7-5.1.zip weekly ROM.
Previously I was using xiaomi.eu_multi_HM2013023_6.1.28_v7-4.4.zip.
I updated using Updater app on phone as usual when I did it.
The update went OK, but after rebooting, the phone get stuck on MIUI startup screen (for hours).
What I tried so far to fix it is to boot to TWRP recovery and install xiaomi.eu_multi_wt86047_6.4.7_v7-5.1.zip ROM again: I turn on the phone in Fastboot mode, I upload TWRP (wt86047-TWRP3.0.0-1_LP.zip) by USB from computer, and then I install ROM from SD card.
I enclose the recovery.log from my last try in this message, but cannot see what is the problem, install seems OK.
Please do not hesitate to reply if you know a way to unbrick it installing the new weekly ROM.
Thanks for your help.
I also noticed that multiple people reported the same problem in the thread, at least with Redmi2 TD wt86047, so there might be a problem with the OS upgrade or process if I am not the only one.
That the first time in more than one year that the update process failed for me.
Regards
If You have a redmi 2013023 You have not a redmi 2 td (2014813 or wt86 etc) but You have a redmi 1. Xiaomi.eu if i remember don't support any more your xiaomi. You have to use a rom fastboot for redmi 1 2013023 if not You brik your phone. Find on en.miui.com a guide to miflash your phone

Inviato dal mio redmi 2 2gb 2014813 utilizzando Tapatalk
 
Yes! Perfect! I was taking about the first rom you wrote! Miuihm2xtd....

Stefano - Redmi2 16gb (2014813)
 
Never mind, I solved it.
I found the fastboot chinese ROM for wt86047 on xiaomi web (which were none of my previous message), but I was not able to flash them properly.

_ In the end, I just started the phone in fastboot mode again,
_ then upload TWRP (wt86047-TWRP3.0.0-1_LP.zip) by USB from computer
_ once the phone enter TWRP, I went to wipe section, wiped to factory reset, but I also formatted the data partition
_ then I installed eekly ROM xiaomi.eu_multi_wt86047_6.4.7_v7-5.1.zip

After reboot, it took only a few seconds to see "android" at the bottom of the MI boot screen.
Then it took a bit longer, but the phone finally started, and now I am configuring everything again (oh the joy).

Regards
Glad you solved it anyway


Stefano - Redmi2 16gb (2014813)
 
On this official MIUI thread, it's been mentioned we can use Camera album as Daily Lockscreen :
http://en.miui.com/thread-257234-1-1.html

It's not explicitely detailed though, and I can't find any option in our ROM for that : by the way, it seems 'Favorite wallpapers' does not work either :)

Anyone using daily lockscreens can confirm this ?

Thanks,
Guiluge.
 
Hi there, first time here :)

During the weekend I updated my Redmi3 to this latest miui 6.4.7 version (with problems! While I did it via update my phone didn't want to load the system [bootloop], so I flashed official developer room and than install via TWRP this particular (6.4.7) soft).

Everything works fine (except I lost all the data...), however I noticed that battery drain is much higher than it was in previous release :(
Befeore I could use phone for at least 2 days (LTE on all the time, sync and wi-fi approx 50% time)... Now it is like 1 and half day the most.

Anyone has the same issue? I consider two options now:
1. wait patiently for next update with hope, that this bug will be fixed.
2. get back to previous version (but how? without much filosophy... and with all the apps and data without reinstalling them)

1.png
2.png
3.png
 
Status
Not open for further replies.

Similar threads