[GUIDE][cas] How to install Xiaomi.eu ROM for Xiaomi MI10 Ultra
- Thread starter ingbrzy
- Start date
hi, i just flash this rom. i came from stock China rom. after finish, i clear dalvik, reboot. then i went to TWRP again. can anyone assist? tq
So I have a question:
I tried to enter recovery (of the Mi 10 Pro) and the passcode failed (though I keyed in correctly). I read that I have to delete locksettings.db. Same problem but I couldn't unlock after normal boot-up. I entered recovery (still asking passcode) and I wiped cache and dalvik.
My phone could boot up but I couldn't launch any app. It says "Wait until your device is fully rebooted before opening Apps". It's been an hour and I still get the same message. Any idea what I could do?
Alternative is to format the phone via TWRP. I can't factory reset because Settings keeps force close.
I tried to enter recovery (of the Mi 10 Pro) and the passcode failed (though I keyed in correctly). I read that I have to delete locksettings.db. Same problem but I couldn't unlock after normal boot-up. I entered recovery (still asking passcode) and I wiped cache and dalvik.
My phone could boot up but I couldn't launch any app. It says "Wait until your device is fully rebooted before opening Apps". It's been an hour and I still get the same message. Any idea what I could do?
Alternative is to format the phone via TWRP. I can't factory reset because Settings keeps force close.
I had the same issue. Just do a full wipe not only cache. Then I copied the stable ROM to a USB and installed via OTG.
format data will wipe off all your apps, backups, media and remove encryption on internal storage < this ?
If I remember correctly, go to Advanced wipe and select all apart from the OTG. Your are trying to install EU Stable right?
As I remember, you need get into : Wipe > advanced wipe, then tick on.
- Dalvik / ART cache
- Data
- Cache
- Systerm
These steps will clear all "old datas of previous rom" to make sure there's no conflict after install. By the way, which version you guys are using? TWRP and EU rom version?
Pickart
Members
- Nov 4, 2020
- 2
- 13
ThnxHow to install Xiaomi.eu ROM for Xiaomi MI 10 Ultra
We will release fastboot ROM versions until TWRP for cas is released
Steps to install xiaomi.eu ROM for first time from China ROM (All your data and files on internal storage will be deleted!)
- Unlock your bootloader by Mi Unlock tool https://en.miui.com/unlock/
- Download our ROM zip file xiaomi.eu_multi_MI10Ultra_20.9.3_v12-10
- Unpack downloaded zip file in the PC
- Reboot your device to fastboot mode (press volume down + power)
- Connect to PC via USB cable
- Run fastboot installation script from unpacked zip according your PC operating system
For Windows OS.\windows_fastboot_first_install_with_data_format.bat
For Linux./linux_fastboot_first_install_with_data_format.sh
For MacOS./macos_fastboot_first_install_with_data_format.sh
- After reboot its done (first boot may take up to 10min)
Steps to install update of xiaomi.eu ROM (All your data and files on internal storage will NOT be deleted!)
- Download our ROM zip file
- Unpack downloaded zip file in the PC
- Reboot your device to fastboot mode (press volume down + power)
- Connect to PC via USB cable
- Run fastboot installation script from unpacked zip according your PC operating system
For Windows OS.\windows_fastboot_update_rom.bat
For Linux./linux_fastboot_update_rom.sh
For MacOS./macos_fastboot_update_rom.sh
- After reboot its done (first boot may take up to 5min)
Update via OTA:
Installation via OTA is currently not possible due to missing TWRP
Updater will notify you about new version and download it to your device for you
You have to copy it to your PC, unpack it and run fastboot_update_rom sctipt
Enjoy..
Yes this done the trick.. Tq everyone. I install the latest 18.11 weekly. Everything works perfectly!!
Any chance to elaborate a little bit more on this? Is it safe to wipe persist.img without losing any more information? I would also like to see SafetyNet pass again without root. Thank you!
It happens for me on some sites. Actually not so many. But it really sucks. Have been experiencing this issue for may be a week or two.
No one knows.
My friend, even A10 for Ultra is conditionally stable!
So there is a long way to A11
tarkan37
Members
- Feb 24, 2016
- 308
- 52
Everything is ok with the phone with the stable 12.0.13.0 , except :
- No Safetynet pass ( but ok i don't use Google pay ) but all my banking applications are working
- I can not have 4G+ signal with my phone provider ( Belgium) it looks like this band is not supported on the phone , i stay at 4g but not crazy !! it is not full signal, 2-3 bars...after it falls on 3g+!!
That's a little bit sad !!
Hope it will goes better in a few times with the 5g !!
- No Safetynet pass ( but ok i don't use Google pay
) but all my banking applications are working- I can not have 4G+ signal with my phone provider ( Belgium) it looks like this band is not supported on the phone , i stay at 4g but not crazy !! it is not full signal, 2-3 bars...after it falls on 3g+!!
That's a little bit sad !!
Hope it will goes better in a few times with the 5g !!
Probably wont since very few countries will use the chinese 5g bands.Everything is ok with the phone with the stable 12.0.13.0 , except :
- No Safetynet pass ( but ok i don't use Google pay
- I can not have 4G+ signal with my phone provider ( Belgium) it looks like this band is not supported on the phone , i stay at 4g but not crazy !! it is not full signal, 2-3 bars...after it falls on 3g+!!
That's a little bit sad !!
Hope it will goes better in a few times with the 5g !!
tarkan37
Members
- Feb 24, 2016
- 308
- 52
Will see, other wise will sell it back on seconde hands !!
I am now on the limit with the 4g network even i am living at Brussels, most of the times it fall on 3g+.....let say it is very slow when you are used to use 4g+ !!
I have a dumb question, but I have tried my best to find answer, which most of the time ended up with full wipe.
I have the TRWP inofficial recovery from Mi10pro installed. My problem is the password upon entering recovery. It always failed even if I entered it correctly, and the sdcard stays encrypted. Which also means I can't flash anything from recovery.
Is there a solution for this?
- I've tried deleting the locksettings.db, which makes all my app stuck on "wait until rebooting is complete" issue, which I have to full wipe
- reflash the recovery from files in this thread and also tried the one from mifirm.net, doesn't solve the issue.
I have the TRWP inofficial recovery from Mi10pro installed. My problem is the password upon entering recovery. It always failed even if I entered it correctly, and the sdcard stays encrypted. Which also means I can't flash anything from recovery.
Is there a solution for this?
- I've tried deleting the locksettings.db, which makes all my app stuck on "wait until rebooting is complete" issue, which I have to full wipe
- reflash the recovery from files in this thread and also tried the one from mifirm.net, doesn't solve the issue.
Poney70
Donator
- Oct 3, 2019
- 5,488
- 337
Hello,
That's not a dumb question.
You need to know that on Android 11 ROMs, you have to use a "pattern" (not a password or a pin) for unlocking your device and so to be able to decrypt /data partition in TWRP (it will ask your "pattern").
Hello,
That's not a dumb question.
You need to know that on Android 11 ROMs, you have to use a "pattern" (not a password or a pin) for unlocking your device and so to be able to decrypt /data partition in TWRP (it will ask your "pattern").
Thanks! I'll try using pattern later.
I have been using numbers. It didn't work.
When you enter twrp via update, yes update can be flashed. But if you see the logs behind, it says decrypt failed.
When you entered recovery manually, it will say decrypt failed and can't access the storage (everything encrypted)
Anyway, pattern works.
Similar threads
- Sticky