neonfuture
Members
- Oct 18, 2019
- 19
- 15
[GUIDE][venus|star|mars] How to install Xiaomi.eu ROM for Xiaomi MI11 / Pro / Ultra
- Thread starter ingbrzy
- Start date
ToeCrusher
Members
- Mar 22, 2021
- 13
- 5
Unlock tool doesn't detect my phone. Windows laptop detects it fine. USB debugging is ON and signed it in mi account on phone as well.
Help please
Help please
Mitchametz
Members
- Feb 18, 2019
- 19
- 15
Unplug and replug it. You must to be on Fastboot Mod (power + volume down) for unlock ToolUnlock tool doesn't detect my phone. Windows laptop detects it fine. USB debugging is ON and signed it in mi account on phone as well.
Help please
ToeCrusher
Members
- Mar 22, 2021
- 13
- 5
Tried everything multiple times. Used two different computers.
The computer detects the phone fine on other apps as I used Xiaomi ADB/Fastboot Tools to remove some Chinese Apps. So it's only the unlock tool that doesn't detect the phone.
Mitchametz
Members
- Feb 18, 2019
- 19
- 15
Xiaomi Tools works with ADB mod, Mi Unlock on Fastboot mod, you have put the phone on Fastboot mod?
ToeCrusher
Members
- Mar 22, 2021
- 13
- 5
Yes, I did that. I switched off the phone. Then long pressed volume down and power button. It started in fastboot mod.
deepblue2000
Members
- Apr 14, 2017
- 947
- 182
show us your device manager when the Mi11 is in fastboot,
I think you did install the wrong driver
I think you did install the wrong driver
ToeCrusher
Members
- Mar 22, 2021
- 13
- 5
ToeCrusher
Members
- Mar 22, 2021
- 13
- 5
Look in the tool folder maybe you have the drivers there. You must choose 32 or 64bit drivers, depending on your computer.
pittrich67
Members
- Dec 29, 2016
- 604
- 82
An important question before the next update. Until now I have always started the Fastboot mode with power and volume - because the Mi 11 always booted into Fastbootd mode via ADB command. In Fastbootd mode, the Mi 11 was incorrectly recognized by the computer and it did not accept any Fastboot commands. After reinstalling the ADB and Fastboot drivers, everything works fine.
Now to the question. Can I also flash the Fastboot ROM in Fastbootd mode, or is that only possible in Fastboot mode?
Gesendet von meinem Mi 11 mit Tapatalk
Now to the question. Can I also flash the Fastboot ROM in Fastbootd mode, or is that only possible in Fastboot mode?
Gesendet von meinem Mi 11 mit Tapatalk
ToeCrusher
Members
- Mar 22, 2021
- 13
- 5
I used a different Windows machine and allowed Windows to update the latest driver. It worked. The request has been sent. Now the waiting game for the next 167 hours.
deepblue2000
Members
- Apr 14, 2017
- 947
- 182
I never heard something about that "fastbootd"?!?!An important question before the next update. Until now I have always started the Fastboot mode with power and volume - because the Mi 11 always booted into Fastbootd mode via ADB command. In Fastbootd mode, the Mi 11 was incorrectly recognized by the computer and it did not accept any Fastboot commands. After reinstalling the ADB and Fastboot drivers, everything works fine.
Now to the question. Can I also flash the Fastboot ROM in Fastbootd mode, or is that only possible in Fastboot mode?
Gesendet von meinem Mi 11 mit Tapatalk
I do always hold power button to open the shutdown/reboot screen, slide down to reboot the mi11 and then press volDown when it does start the reboot.
But if you can use fastboot to upgrade the weekly... I would wait for a dev to get the answer
Last edited:
so i had the this error,
still in fastboot
Sending 'dsp_ab' (65536 KB) FAILED (Status read failed (Too many links))
how can i solve this?
still in fastboot
Sending 'dsp_ab' (65536 KB) FAILED (Status read failed (Too many links))
how can i solve this?
Marcosuper7
Members
- Mar 10, 2021
- 38
- 20
Telegram
https://t.me/*spam*paid*service*
Group autoriced edl
Enviado desde mi M2011K2G mediante Tapatalk
now the phone is detected as : Qualcomm HS-USB QDLoader
my phone bricked
Maybe cause I am on amd
my phone bricked
Maybe cause I am on amd
Last edited:
Updated my Xiaomi Mi11 yesterday to EU-rom Stable.
I've had many doubts about flashing, because so many people here bricked their Mi11's.
Followed all the rules, and..... it worked
Some remarks to people who have fear to update:
-i unlocked bootloader through official Xiami unlock tool
-after unlock, i rebooted phone and set it up again (just quick and dirty). Also check if "OEM Unlock" is still switched on.
-after downloading ROM it was kind of hard to find the "Unblock zip content" in the properties of the zip-file. It's there right after you download the file, but disappears after some seconds, leaving you no option to select that in Windows.
Kind of strange. I downloaded the file 3 times, third time i was quick enough to be able to tick the box.
-another part where it could have gone wrong: after a couple of seconds after starting the update procedure in CMD, you see the screen stopping. Leaving you with the last message: "Successful". I almost wanted to plug out the usb-cable and restart, but then i realised: "this has taken only 20 seconds, it can't be that fast...". But: the screen on my pc didn't show any sign of further progress. So: my hands already became sweaty.... "oh no...another mi11 bricked". But: it worked. After some time the updateprocess continued.
So the advice here is: Stay Calm And Wait!! It will continue after a minute or so.
-i also got an error message in the end about not being able to create some disk part. But: that was no problem. Mi11 booted, took me 8 minutes and then it was done.
Happy.
I've had many doubts about flashing, because so many people here bricked their Mi11's.
Followed all the rules, and..... it worked
Some remarks to people who have fear to update:
-i unlocked bootloader through official Xiami unlock tool
-after unlock, i rebooted phone and set it up again (just quick and dirty). Also check if "OEM Unlock" is still switched on.
-after downloading ROM it was kind of hard to find the "Unblock zip content" in the properties of the zip-file. It's there right after you download the file, but disappears after some seconds, leaving you no option to select that in Windows.
Kind of strange. I downloaded the file 3 times, third time i was quick enough to be able to tick the box.
-another part where it could have gone wrong: after a couple of seconds after starting the update procedure in CMD, you see the screen stopping. Leaving you with the last message: "Successful". I almost wanted to plug out the usb-cable and restart, but then i realised: "this has taken only 20 seconds, it can't be that fast...". But: the screen on my pc didn't show any sign of further progress. So: my hands already became sweaty.... "oh no...another mi11 bricked". But: it worked. After some time the updateprocess continued.
So the advice here is: Stay Calm And Wait!! It will continue after a minute or so.
-i also got an error message in the end about not being able to create some disk part. But: that was no problem. Mi11 booted, took me 8 minutes and then it was done.
Happy.
I come back to you with my mi11 stuck in edl mode. I saw with Angelus69 and we tried with miflash and a Chinese rom. Unfortunately there is a "pin target firehose fail" error message when the smartphone flashes. After several tests Angelus thinks that the mi11 would be in emmc crash ! Can anyone help me or guide me to someone who can?
Poney70
Donator
- Oct 3, 2019
- 5,488
- 337
I don't know where you bought your phone but you should try to use the warranty.
Mrboombastixx
Members
- Feb 14, 2021
- 126
- 40
Flashed and updated to 21.3.24 just like I'm hoping for on my Mi 11 with no problem at all. Kudos to dev for the hard work!
Mrboombastixx
Members
- Feb 14, 2021
- 126
- 40
Marcosuper7
Members
- Mar 10, 2021
- 38
- 20
Similar threads
