Pressing volume up + power will bring up boot menu. If your system has problem, the menu will not show up. It will instead go into an alternative download mode.
You don't want that. You want to go to proper download mode. You need 3 buttons. Volume up + volume down + power to reach the proper download mode
Yes i believe a lot of people got into the wrong download mode. That causes the end of file error in miflash. People are not aware that there are actually 2 different download modes
Sent from my Redmi 3 using Tapatalk
Thanks for ansverig, but! My phone not startup, not going to recovery or fastboot. When I hold Vol+ during USB inserting, probably starting EDL mode. Phone recognized as Qualcomm blah-blah-blah in device manager. But when i try to flash the ROM via MiFlash i got error "Reached end of file ....... Receiving hello packet"
So in your opinion as you enter the correct way? thanks
Yes its detected as com 10. But when i try to flash i got "End of file error"Did miflash recognized it?
Yes its detected as com 10. But when i try to flash i got "End of file error"
Friends, please before answering, take a look at post number 1!
understand something, in that we have this problem could not go into download mode or fastboot, or otherwise, the mobile phone is in a deep coma !!
I thank all who have given their contribution to help, but we have seen that it is not pressing the on / off and volume that we will solve this problem.
thank you
As i mentioned earlier, there are 2 different download modes. Can you confirm you are new download mode by checking device manager. There should not be any extra drive
Sent from my Redmi 3 using Tapatalk
Edit sorry in new download mode there should be extra drive in device manager
Please!!!, Can someone upload or share with us a full backup rooted from a redmi 3 to try this method?I found this article that is related to what you said
Guide, if you are NEW “Qualcomm HS-USB QDLoader 9008” MODE
http://www.droidsavvy.com/unbrick-qualcomm-mobiles/
however it is necessary that someone with 1 redmi 3 make himself available to create a full backup rooted
You don't want that. You want to go to proper download mode. You need 3 buttons. Volume up + volume down + power to reach the proper download mode
Are you sure place rom in a folder without space character when flashing with MI flash like redmi_3 not redmi 3, if mi flash detect your device, I'm sure it will work, if there is a space on folder it only work half progress.I found this article that is related to what you said
Guide, if you are NEW “Qualcomm HS-USB QDLoader 9008” MODE
http://www.droidsavvy.com/unbrick-qualcomm-mobiles/
however it is necessary that someone with 1 redmi 3 make himself available to create a full backup rooted
Hi, tomorrow I will get my second redmi 3, so then the unlock bootloader code obtain, I make the recovery.img to try flash the redmi 3 bricked, I will upload the image soon...I found this article that is related to what you said
Guide, if you are NEW “Qualcomm HS-USB QDLoader 9008” MODE
http://www.droidsavvy.com/unbrick-qualcomm-mobiles/
however it is necessary that someone with 1 redmi 3 make himself available to create a full backup rooted
We use essential cookies to make this site work, and optional cookies to enhance your experience. Cookies are also used for ads personalisation