HyperOS 1.0 HyperOS 1.0 STABLE RELEASE

[deljanin]

Try to reflash the ROM from fastboot

Sent from my 2210132G using Tapatalk

Again same. This time got warrning "skipped copying due to sparse image". Then went to fastboot via adb reboot fastboot. Reflashed again without the warning. Sadly everything is remains the same... "Camera keeps stopping", "System aluncher keeps stopping" etc.

edit: tried your previous comment with those adb commands, now i get error "CMD: Failure calling service package: Broken pipe (32)". Not sure if that has anything to do with my problem..

 

[stathis95194]

Again same. This time got warrning "skipped copying due to sparse image". Then went to fastboot via adb reboot fastboot. Reflashed again without the warning. Sadly everything is remains the same... "Camera keeps stopping", "System aluncher keeps stopping" etc.

Just a random thought since you mentioned the sparse image error, but are you using KernelSU by any chance? If yes try to rename
/data/adb/ksu and reflash rom.
If you are not using KSU ignore my comment


Sent from my 2210132G using Tapatalk

 

[deljanin]

Just a random thought since you mentioned the sparse image error, but are you using KernelSU by any chance? If yes try to rename
/data/adb/ksu and reflash rom.
If you are not using KSU ignore my comment


Sent from my 2210132G using Tapatalk

Sadly no, not rooted..
edit: phone restarted again by itself and even though it still pops some errors about apps that keep stopping, it works now. Some apps now work, but problem remains...
thank you @stathis95194 for your help!

 

[stathis95194]

Sadly no, not rooted..

You run those right? Not from fastboot from cmd while phone is on cable with USB debugging enabled

adb shell pm compile -a -f --full
adb shell reboot

Sent from my 2210132G using Tapatalk

 

[deljanin]

You run those right? Not from fastboot from cmd while phone is on cable with USB debugging enabled

You run those right? Not from fastboot from cmd while phone is on cable with USB debugging enabled

adb shell pm compile -a -f --full
adb shell reboot

Sent from my 2210132G using Tapatalk

adb shell reboot

Sent from my 2210132G using Tapatalk

Yes, everything went good and got an error at the end "Error: Unable to get package com.miui.miwallpaper.snowmountain"

 

[stathis95194]

Yes, everything went good and got an error at the end "Error: Unable to get package com.miui.miwallpaper.snowmountain"

Is snow mountain the wallpaper you are using? Can you disable it? Maybe there is an issue there. Or the phone is not functioning at all?
I don't have any other ideas, maybe someone with more knowledge can chime in and help

Sent from my 2210132G using Tapatalk

 

[deljanin]

Is snow mountain the wallpaper you are using? Can you disable it? Maybe there is an issue there. Or the phone is not functioning at all?
I don't have any other ideas, maybe someone with more knowledge can chime in and help

Sent from my 2210132G using Tapatalk

I disabled it right away (edit: restarted the phone one more time, the wallpaper comes back. Can't get into wallpaper options to change it, it closes right away...). Phone is functioning partly. Keyboard keeps stopping, "permission keeps stopping" etc. Can make call and connect to a wifi unlike in the beginning, but still it's not working fully... Thank you very much for your recommendations!

 

[Rotofonfedro]

Hi, I have a Redmi Note 13 NFC Sapphiren.

I just need to know if, apart from the Rom, it is mandatory to install the GPay module to be able to make payments with my phone or is it enough with a clean installation of the Rom?

Or:

Is the GPay module installed from the Recovery (I have OrangeFox) after installing the clean Rom and no Wipes are needed, right?

Thank you very much in advance!

 

[PifGadget]

HELP! Peridot is not functioning after update! 1.0.17
Turns on, but pop up "system not responding" spamming. Can't connect to network, can't connect to wifi, nothing. Not a single app works. Phone keeps restarting by itself (The hyperOS 2.0 logo).. Any ideas what to do?

That's strange, I flashed my POCO F6 with 1.0.17 and all went smoothly.
Did you try to download the firmware again, it might be corrupted.
Once downloaded, check its MD5 hash to be sure it did not get corrupted during download.
Then update your device using Fastboot with one of the .bat files provided in the .ZIP file.

Good luck.

 

[ujvagyok]

Hi, I have a Redmi Note 13 NFC Sapphiren.

I just need to know if, apart from the Rom, it is mandatory to install the GPay module to be able to make payments with my phone or is it enough with a clean installation of the Rom?

Or:

Is the GPay module installed from the Recovery (I have OrangeFox) after installing the clean Rom and no Wipes are needed, right?

Thank you very much in advance!

Its just an apk with fresh unbanned fingerprint. You just download it and update it by clicking on it.

 

[gyr0ray0]

On peridot, 11% in 42min with 40min of screen on, the battery drain by android system is massif

Oh yes Gsam Battery Monitor Pro sounds like abandonware I can trust

Jokes aside, what would you consider a normal drain under those circumstances? I mean how much battery do you expect to be consumed?

 

[tamp0i]

Good day gents. I am running 13 Ultra (Ishtar) and it has always bothered me, but how to actually keep all the camera filters on?

 

[Jimnasium]

Like darki said, a forum is not a single thread. There has to be an order so that the forum doesn't turn into a "general discussion chatroom".
You can choose to ignore what I said and have your comments consistently deleted, it's up to you.

It seems like you didn't recognize this forum has more areas than just the ROM release area.

true, but any discussion pertinent to the use of the rom is important to facillitate user growth and knowledge, as well as, the growth of this site which makes money from advertising money. If users are gone, what happens to the advertising income?

 

[JiaiJ]

true, but any discussion pertinent to the use of the rom is important to facillitate user growth and knowledge, as well as, the growth of this site which makes money from advertising money. If users are gone, what happens to the advertising income?

I don't get your point, the whole forum is here to help the users, it is still not a good reason to put all the random "useful" topics in the install thread.

 

[ViceEye]

i am k40, can i downgrade from os 1 back to miui 14 without wipe?

 

[xMarvin732]

i am k40, can i downgrade from os 1 back to miui 14 without wipe?

no you cant downgrade, you have to clean flash

 

[fast83]

@Kacper Skrzypek jusy FYI, the latest fp has been banned, just found out by paying (and it happens EVERY time I don't check the integrity before paying XD)
If you guys already knew, ignore the post

 

[Bec de Xorbin]

@Kacper Skrzypek jusy FYI, the latest fp has been banned, just found out by paying (and it happens EVERY time I don't check the integrity before paying XD)
If you guys already knew, ignore the post

Fine for me. Meets both basic and device integrity.

 

[xMarvin732]

Fine for me. Meets both basic and device integrity.

Fine for me aswell

 

[fast83]

Fine for me. Meets both basic and device integrity.

Maybe you don't know the process it's rolled out progressively, so what's not working for me but working for you right now, it will not work for both of us later on.

If the devs knows it right away without waiting for everyone's app to stop working, maybe the update would be quicker don't you think?

 

[Igor Eisberg]

true, but any discussion pertinent to the use of the rom is important to facillitate user growth and knowledge, ...

Wow... not the sharpest pencil in the cup, huh?
What in "a forum is not a single thread" is hard to understand?

... as well as, the growth of this site which makes money from advertising money. If users are gone, what happens to the advertising income?

None of us sees any of that income, so I couldn't care less, so that's quite a moot point made on false assumptions.

 

[Pepitp]

HELP! Peridot is not functioning after update! 1.0.17
Turns on, but pop up "system not responding" spamming. Can't connect to network, can't connect to wifi, nothing. Not a single app works. Phone keeps restarting by itself (The hyperOS 2.0 logo).. Any ideas what to do?

Download again the rom, when I download it 2 days go, it was very slow with error

 

[hoangnam1702]

• 2,593

Can u support VNeID app for Vietnamese users??? Bc from ver 2.1.6 and later, that app no longer allowed unlocked bootloader devices for log in and note: The device is not safe ??? (Nuwa 1.0.15.0)

 

[katerpanne]

custom roms are over and out… igor and his team made a very good job goggle made a good job as well ;-)

 

[xMarvin732]

HyperOS 2.0 is slowly rolling out for more and more devices, Xiaomi 14 already has Mi Pilot for HyperOS2.0 based on Android 15.
Hopefully the upgrade will be smooth whenever its time