[ROM][Official][4.4.4] CyanogenMod 11.0 Nightlies for the Xiaomi MI2 (aries)


shikarishambu said:
I have been using the nightlies for a few months. All was well until last week. Now, I can't make or receive calls - the phone does dial out but no dialing noise and cannot hear the other party after the call is connected. Similarly, the incoming call rings but cannot hear the other party after the call is connected. Is anyone else experiencing this issue? I am on 20141209 nightly and i was on 20141206 nightly before that. That is when i first encountered this issue.

Any help in resolving this is appreciated.

Thanks
Click to expand...

So, it's not my phone fault!
How to repair it?
 
cbpbxecmecmbeh said:
OTA works beautifully ;)
make sure you select the correct system when the phone reboots to recovery
Click to expand...
so if I flash this rom in sys 1 whit miui in sys2 tdb enabled, for next update i can flash via ota whithout lose miui in sys2 and tdb is still enabled? what does it means select the correct system....?
 
graw2 said:
"Ok Google" only working from Google Search app, but does not working on any screen and does not working from lock screen. Any idea how to get working from any screen including lock screen?

Sent from my Mi2S using Tapatalk
Click to expand...
set english US
 
Hello all,
I'm having wakelocks constantly, i tried M12 And the last 3 nightlies from CM11

fef93fd188427553d2b34ab635a75116.jpg


Wakelocks are presents all the time, this screenshot are from a fresh install about an hour ago.

Maybe helps, i change the LCD frame last week.

Regards
 
gabrielo said:
Hello all,
I'm having wakelocks constantly, i tried M12 And the last 3 nightlies from CM11

fef93fd188427553d2b34ab635a75116.jpg


Wakelocks are presents all the time, this screenshot are from a fresh install about an hour ago.

Maybe helps, i change the LCD frame last week.

Regards
Click to expand...
Well the problem was mediaserver trying to read multimedia corrupted files.
 
gabrielo said:
Well the problem was mediaserver trying to read multimedia corrupted files.
Click to expand...

Do you get the audio bug? I mean when you can't hear the other person and they can't hear you. It's related to Google play services, therefore I couldn't use any Google Apps with this rom.
 
IsaacB said:
Do you get the audio bug? I mean when you can't hear the other person and they can't hear you. It's related to Google play services, therefore I couldn't use any Google Apps with this rom.
Click to expand...
That seems to be solved in the latest build
 
gabrielo said:
Hello all,
I'm having wakelocks constantly, i tried M12 And the last 3 nightlies from CM11

fef93fd188427553d2b34ab635a75116.jpg


Wakelocks are presents all the time, this screenshot are from a fresh install about an hour ago.

Maybe helps, i change the LCD frame last week.

Regards
Click to expand...


I had a fast draining phone running CM11 until recently. What I did to solve this is follow the tutorial here:

http://en.miui.com/thread-73236-1-1.html

I had some issues with /system having no free space so I used 'uninstall' from gplay to delete some system apps .

I also installed xposed as suggest. Then also go through settings>privacy>privacy protection>advanced > disable as much as possible wake up permissions for apps that shouldnt be able to wake up the phone.

Good luck!
 
Hieron said:
I had a fast draining phone running CM11 until recently. What I did to solve this is follow the tutorial here:

http://en.miui.com/thread-73236-1-1.html

I had some issues with /system having no free space so I used 'uninstall' from gplay to delete some system apps .

I also installed xposed as suggest. Then also go through settings>privacy>privacy protection>advanced > disable as much as possible wake up permissions for apps that shouldnt be able to wake up the phone.

Good luck!
Click to expand...
There is also really good tutorial from our Russian friends, you can use google translate:

http://4pda.ru/forum/index.php?showtopic=474954&view=findpost&p=39511511
http://4pda.ru/forum/index.php?showtopic=474954&st=7680#entry38755810 CM12
But can I ask is it usefull in lollipop 5.1?
 
gabrielo said:
Hello all,
I'm having wakelocks constantly, i tried M12 And the last 3 nightlies from CM11

fef93fd188427553d2b34ab635a75116.jpg


Wakelocks are presents all the time, this screenshot are from a fresh install about an hour ago.

Maybe helps, i change the LCD frame last week.

Regards
Click to expand...
Try installing xposed framework and intelli3g
 
I hope someone still use CM11 nightlies: I have a continueous problem with /system/bin/mediaserver taking up to 50 % CPU all the time after boot. Once I kill the process ("kill -15 PID"), things get normal again.

Logcat show a fast repeating msg (where 197 is PID of mediaserver):
Code: 
D/QMI_FW  (  197): QCCI: reader_thread: wakeup_pipe[0]=10 ch=a

Once I kill mediaserver:
Code: 
W/AudioSystem( 1103): AudioPolicyService server died!
W/AudioSystem( 2648): AudioPolicyService server died!
W/AudioSystem( 1103): AudioFlinger server died!
W/AudioSystem( 2648): AudioFlinger server died!
W/CameraBase( 2648): Camera service died!
W/AudioSystem(  604): AudioPolicyService server died!
W/MediaMetadataRetriever(  929): MediaMetadataRetriever server died!
W/AudioSystem(  604): AudioFlinger server died!
I/ServiceManager(  186): service 'media.audio_policy' died
W/IMediaDeathNotifier(  604): media server died
I/ServiceManager(  186): service 'media.audio_flinger' died
I/ServiceManager(  186): service 'media.player' died
I/ServiceManager(  186): service 'media.camera' died
W/CameraBase(  807): Camera service died!
W/IMediaDeathNotifier(  807): media server died
E/AudioService(  604): Media server died.
D/QMI_FW  (  188): QCSI: Received REMOVE_CLIENT cmd for 00000001:00000012

And then it continues with various messages:
Code: 
I/mediaserver( 4871): ServiceManager: 0xb83ff4f0
I/AudioFlinger( 4871): Using default 3000 mSec as standby time.
E/MediaPlayerFactory( 4871): calling dlopen on FACTORY_LIB
E/MediaPlayerFactory( 4871): Failed to open FACTORY_LIB Error : dlopen failed: library "libdashplayer.so" not found
I/CameraService( 4871): CameraService started (pid=4871)
I/CameraService( 4871): Loaded "Qcamera" camera module
E/QualcommCamera( 4871): Qint android::get_number_of_cameras(): E
I/AudioPolicyManagerBase( 4871): loadAudioPolicyConfig() loaded /system/etc/audio_policy.conf
D/ALSADevice( 4871): ALSA module opened
D/AudioHardwareALSA( 4871): AudioHardware: DLOPEN successful for ACDBLOADER
D/ACDB-LOADER( 4871): ACDB -> ACDB_CMD_INITIALIZE
E/        ( 4871): [ACDB RTC]->rtc init done!->result [0]
E/        ( 4871): [ACDB ACPH]->actp diag init done!
D/ACDB-LOADER( 4871): No existing ION info in ACDB driver
D/ACDB-LOADER( 4871): ACDB -> ION_IOC_ALLOC
D/ACDB-LOADER( 4871): ACDB -> ION_IOC_SHARE
D/ACDB-LOADER( 4871): ACDB -> MMAP ADDR
D/ACDB-LOADER( 4871): ACDB -> register MEM to ACDB driver: 0xb5c72000
D/ACDB-LOADER( 4871): ACDB -> send_asm_topology
D/ACDB-LOADER( 4871): ACDB -> ACDB_CMD_GET_AUDPROC_STREAM_TOPOLOGY_ID
D/ACDB-LOADER( 4871): send mbhc data
D/ACDB-LOADER( 4871): send tabla anc data
D/ACDB-LOADER( 4871): ACDB -> ACDB_CMD_GET_ANC_SETTING
D/ACDB-LOADER( 4871): done with conversion, anc config size is 148
D/ACDB-LOADER( 4871): ACDB -> ACDB_CMD_GET_ANC_SETTING
D/ACDB-LOADER( 4871): done with conversion, anc config size is 148
D/ACDB-LOADER( 4871): ACDB -> ACDB_CMD_GET_ANC_SETTING
D/ACDB-LOADER( 4871): done with conversion, anc config size is 148
D/ACDB-LOADER( 4871): ACDB -> ACDB_CMD_GET_ANC_SETTING
D/ACDB-LOADER( 4871): done with conversion, anc config size is 148
D/ACDB-LOADER( 4871): ACDB -> ACDB_CMD_GET_ANC_SETTING
D/ACDB-LOADER( 4871): done with conversion, anc config size is 74
D/ACDB-LOADER( 4871): ACDB -> ACDB_CMD_GET_ANC_SETTING
D/ACDB-LOADER( 4871): done with conversion, anc config size is 74
D/ACDB-LOADER( 4871): ACDB -> init done!
I/ALSADevice( 4871): void android_audio_legacy::ALSADevice::setACDBHandle(void*) ACDB_handle: 0xb6f02c90
D/alsa_ucm( 4871): Single config file format detected
E/AudioService(  604): Media server started.
E/alsa_ucm( 4871): EC_REF_RX mixer ctl: SLIM_RX
E/alsa_ucm( 4871): EC_REF_RX mixer ctl: SLIM_RX
E/alsa_ucm( 4871): EC_REF_RX mixer ctl: SLIM_RX
E/alsa_ucm( 4871): EC_REF_RX mixer ctl: SLIM_RX
E/alsa_ucm( 4871): EC_REF_RX mixer ctl: SLIM_RX
E/alsa_ucm( 4871): EC_REF_RX mixer ctl: SLIM_RX
E/alsa_ucm( 4871): EC_REF_RX mixer ctl: SLIM_RX
E/alsa_ucm( 4871): EC_REF_RX mixer ctl: SLIM_RX
E/alsa_ucm( 4871): EC_REF_RX mixer ctl: SLIM_RX
E/alsa_ucm( 4871): EC_REF_RX mixer ctl: SLIM_RX
E/alsa_ucm( 4871): EC_REF_RX mixer ctl: SLIM_RX
E/alsa_ucm( 4871): EC_REF_RX mixer ctl: SLIM_RX
E/alsa_ucm( 4871): EC_REF_RX mixer ctl: SLIM_RX
E/alsa_ucm( 4871): EC_REF_RX mixer ctl: SLIM_RX
E/alsa_ucm( 4871): EC_REF_RX mixer ctl: SLIM_RX
D/AudioHardwareALSA( 4871): AudioHardware: DLOPEN successful for CSD CLIENT
D/        ( 4871): csd_client_init
E/        ( 4871): csd_client_service_init: Invalid rx device 0, setting to handset
E/        ( 4871): csd_client_service_init: Invalid tx device 0, setting to handset
E/QMI_FW  ( 4871): QMUXD: WARNING qmi_qmux_if_alloc_service_client failed! service_id = 20, conn_id = 0, rc=-5 error = 0
D/QMI_FW  ( 4871): QCCI: xport_open[21]: max_rx_len=0
D/QMI_FW  ( 4871): QCCI: Lookup: type=20 instance=1
D/QMI_FW  ( 4871): QCCI: reader_thread: wakeup_pipe[0]=1 ch=a
D/QMI_FW  (  188): QCSI: Received REMOVE_CLIENT cmd for 00000001:00000049
D/QMI_FW  ( 4871): QCCI: QMUXD: xport_open[0] for service_id=20 max_rx_len=0
D/QMI_FW  ( 4871): QCCI: QMUXD: xport_open[9] for service_id=20 max_rx_len=0
D/QMI_FW  ( 4871): QCCI: QMUXD: xport_open[9] successful for service_id=20 max_rx_len=0
D/QMI_FW  ( 4871): QCCI: QMUXD: xport_lookup for service_id=20 on conn_id=9
E/QMI_FW  ( 4871): QMUXD: Service_id=20 not found over conn_id=0
D/QMI_FW  ( 4871): QCCI: QMUXD: Service_id=20 found over conn_id=9
D/QMI_FW  ( 4871): QCCI: Lookup: type=20 instance=1
D/QMI_FW  (  188): QCSI: Received REMOVE_CLIENT cmd for 00000001:0000004a
D/QMI_FW  ( 4871): QCCI: QMUXD: xport_lookup for service_id=20 on conn_id=0
D/QMI_FW  ( 4871): QCCI: QMUXD: xport_lookup for service_id=20 on conn_id=9
E/QMI_FW  ( 4871): QMUXD: Service_id=20 not found over conn_id=0
D/QMI_FW  ( 4871): QCCI: QMUXD: Service_id=20 found over conn_id=9
D/QMI_FW  ( 4871): QCCI: Lookup: type=20 instance=1
D/QMI_FW  (  188): QCSI: Received REMOVE_CLIENT cmd for 00000001:0000004b
D/QMI_FW  ( 4871): QCCI: QMUXD: xport_lookup for service_id=20 on conn_id=0
D/QMI_FW  ( 4871): QCCI: QMUXD: xport_lookup for service_id=20 on conn_id=9
D/QMI_FW  ( 4871): QCCI: QMUXD: Service_id=20 found over conn_id=9
D/QMI_FW  ( 4871): QCCI: QMUXD: xport_open[9] for service_id=20 max_rx_len=4108
E/QMI_FW  ( 4871): QMUXD: Service_id=20 not found over conn_id=0
D/QMI_FW  ( 4871): QCCI: QMUXD: xport_open[9] successful for service_id=20 max_rx_len=4108
D/QMI_FW  ( 4871): QCCI: Lookup: type=20 instance=1
D/QMI_FW  (  188): QCSI: Received REMOVE_CLIENT cmd for 00000001:0000004c
D/QMI_FW  ( 4871): QCCI: QMUXD: xport_lookup for service_id=20 on conn_id=0
D/QMI_FW  ( 4871): QCCI: QMUXD: xport_lookup for service_id=20 on conn_id=9
E/QMI_FW  ( 4871): QMUXD: Service_id=20 not found over conn_id=0
D/QMI_FW  ( 4871): QCCI: QMUXD: Service_id=20 found over conn_id=9
D/QMI_FW  ( 4871): QCCI: Lookup: type=20 instance=1
D/QMI_FW  (  188): QCSI: Received REMOVE_CLIENT cmd for 00000001:0000004d
D/QMI_FW  ( 4871): QCCI: QMUXD: xport_lookup for service_id=20 on conn_id=0
D/QMI_FW  ( 4871): QCCI: QMUXD: xport_lookup for service_id=20 on conn_id=9
D/QMI_FW  ( 4871): QCCI: QMUXD: Service_id=20 found over conn_id=9
D/QMI_FW  ( 4871): QCCI: QMI_CCI_TX: cntl_flag - 00, txn_id - 0001, msg_id - 0021, msg_len - 0000
D/QMI_FW  ( 4871): QCCI: QMUXD: xport_send[3 -> 20]: 7 bytes on conn_id=9
D/QMI_FW  ( 4871): QCCI: QMUXD: xport_rx[3 <- 20]: 14 bytes on conn_id: 9
D/QMI_FW  ( 4871): QCCI: QMI_CCI_RX: cntl_flag - 02, txn_id - 0001, msg_id - 0021, msg_len - 0007
D/QMI_FW  ( 4871): QCCI: QMI_CCI_TX: cntl_flag - 00, txn_id - 0002, msg_id - 0027, msg_len - 0000
D/QMI_FW  ( 4871): QCCI: QMUXD: xport_send[3 -> 20]: 7 bytes on conn_id=9
D/QMI_FW  ( 4871): QCCI: QMUXD: xport_rx[3 <- 20]: 21 bytes on conn_id: 9
D/QMI_FW  ( 4871): QCCI: QMI_CCI_RX: cntl_flag - 02, txn_id - 0002, msg_id - 0027, msg_len - 000e
D/QMI_FW  ( 4871): QCCI: QMI_CCI_TX: cntl_flag - 00, txn_id - 0003, msg_id - 0023, msg_len - 0016
D/QMI_FW  ( 4871): QCCI: QMUXD: xport_send[3 -> 20]: 29 bytes on conn_id=9
D/QMI_FW  ( 4871): QCCI: QMUXD: xport_rx[3 <- 20]: 21 bytes on conn_id: 9
D/QMI_FW  ( 4871): QCCI: QMI_CCI_RX: cntl_flag - 02, txn_id - 0003, msg_id - 0023, msg_len - 000e
D/QMI_FW  ( 4871): QCCI: QMI_CCI_TX: cntl_flag - 00, txn_id - 0004, msg_id - 0025, msg_len - 001f
D/QMI_FW  ( 4871): QCCI: QMUXD: xport_send[3 -> 20]: 38 bytes on conn_id=9
D/QMI_FW  ( 4871): QCCI: QMUXD: xport_rx[3 <- 20]: 21 bytes on conn_id: 9
D/QMI_FW  ( 4871): QCCI: QMI_CCI_RX: cntl_flag - 02, txn_id - 0004, msg_id - 0025, msg_len - 000e
D/QMI_FW  ( 4871): QCCI: QMI_CCI_TX: cntl_flag - 00, txn_id - 0005, msg_id - 0026, msg_len - 0017
D/QMI_FW  ( 4871): QCCI: QMUXD: xport_send[3 -> 20]: 30 bytes on conn_id=9
I/ALSADevice( 4871): void android_audio_legacy::ALSADevice::setCsdHandle(void*) csd_handle: 0xb5ff9128
I/AudioHardwareALSA( 4871): ucm instance opened: 3091241656
E/AudioHardwareALSA( 4871): doAudienceCodec_Init+
D/QMI_FW  ( 4871): QCCI: QMUXD: xport_rx[3 <- 20]: 21 bytes on conn_id: 9
D/QMI_FW  ( 4871): QCCI: QMI_CCI_RX: cntl_flag - 02, txn_id - 0005, msg_id - 0026, msg_len - 000e
E/AudioHardwareALSA( 4871): doAudienceCodec_Init-
I/AudioFlinger( 4871): loadHwModule() Loaded primary audio interface from QCOM Audio HW HAL (audio) handle 1
D/AudioHardwareALSA( 4871): useCase HiFi
D/ALSADevice( 4871): route: devices 0x2 in mode 0
D/ALSADevice( 4871): No valid input device: 0
D/alsa_ucm( 4871): snd_use_case_set(): uc_mgr 0xb8409ab8 identifier _enadev value Speaker
E/alsa_ucm( 4871): Invalid verb_index -1
E/alsa_ucm( 4871): No valid device Speaker found
D/ALSADevice( 4871): switchDevice: mCurTxUCMDevivce None mCurRxDevDevice Speaker
D/libaudioamp( 4871): doRouting_Audience_Codec mode:0 Routes:0x2 Enable:1.
D/alsa_ucm( 4871): snd_use_case_set(): uc_mgr 0xb8409ab8 identifier _verb value HiFi
D/alsa_ucm( 4871): Set mixer controls for Speaker enable 1
D/alsa_ucm( 4871): acdb_id 14 cap 1 enable 1
D/ACDB-LOADER( 4871): ACDB -> send_afe_cal
D/alsa_ucm( 4871): Setting mixer control: SLIM_0_RX Channels, value: One
D/alsa_ucm( 4871): Setting mixer control: RX3 MIX1 INP1, value: RX1
D/alsa_ucm( 4871): Setting mixer control: RX3 MIX1 INP2, value: RX6
D/alsa_ucm( 4871): Setting mixer control: RX4 DSM MUX, value: DSM_INV
D/alsa_ucm( 4871): Setting mixer control: RX3 Digital Volume, value: 68
D/alsa_ucm( 4871): Setting mixer control: RX4 Digital Volume, value: 68
D/alsa_ucm( 4871): Setting mixer control: LINEOUT1 Volume, value: 66
D/alsa_ucm( 4871): Setting mixer control: LINEOUT3 Volume, value: 66
D/alsa_ucm( 4871): Setting mixer control: SLIM TX3 MUX, value: RMIX3
D/alsa_ucm( 4871): Setting mixer control: SLIM TX5 MUX, value: RMIX5
D/alsa_ucm( 4871): Set mixer controls for HiFi enable 1
D/alsa_ucm( 4871): Setting mixer control: SLIMBUS_0_RX Audio Mixer MultiMedia1, value: 1
D/ALSADevice( 4871): HDMI channel count: Two
D/ALSADevice( 4871): setMixerControl:: name HDMI_RX Channels value Two
D/ALSADevice( 4871): close: handle 0xb84483a0 h 0x0
D/ALSADevice( 4871): open: handle 0xb84483a0, format 0x2
D/ALSADevice( 4871): Device value returned is hw:0,0
D/ALSADevice( 4871): handle->format: 0x2
D/ALSADevice( 4871): setHardwareParams: reqBuffSize 2048 channels 2 sampleRate 48000
D/ALSADevice( 4871): setHardwareParams: buffer_size 16384, period_size 2048, period_cnt 8
I/AudioFlinger( 4871): HAL output buffer size 512 frames, normal mix buffer size 1024 frames
W/EffectsFactory( 4871): loadLibrary() failed to open /system/lib/soundfx/libqcomvoiceprocessing.so
W/EffectsFactory( 4871): loadEffect() could not get library qcom_pre_processing
I/AudioMixer( 4871): found effect "Multichannel Downmix To Stereo" from The Android Open Source Project
E/MonoPipe( 4871): Failed to fetch local time frequency when constructing a MonoPipe (res = -32).  getNextWriteTimestamp calls will be non-functional
I/AudioFlinger( 4871): Using module 1 has the primary audio interface
D/AudioPolicyManagerBase( 4871): setOutputDevice() changing device from (2) to (2)        force (1) delayMs (0) on Output (2)
I/AudioFlinger( 4871): AudioFlinger's thread 0xb58d3008 ready to run
D/ALSAStreamOps( 4871): setParameters(): keyRouting with device 0x2
D/ALSAStreamOps( 4871): setParameters(): keyRouting with device 0x2
D/ALSADevice( 4871): route: devices 0x2 in mode 0
D/ALSADevice( 4871): No valid input device: 0
D/alsa_ucm( 4871): snd_use_case_set(): uc_mgr 0xb8409ab8 identifier _enadev value Speaker
D/alsa_ucm( 4871): Set mixer controls for HiFi enable 1
D/alsa_ucm( 4871): Setting mixer control: SLIMBUS_0_RX Audio Mixer MultiMedia1, value: 1
D/ALSADevice( 4871): switchDevice: mCurTxUCMDevivce None mCurRxDevDevice Speaker
D/libaudioamp( 4871): doRouting_Audience_Codec mode:0 Routes:0x2 Enable:1.
D/ALSADevice( 4871): standby: handle 0xb84483a0 h 0x0
D/alsa_ucm( 4871): snd_use_case_set(): uc_mgr 0xb8409ab8 identifier _verb value Inactive
D/alsa_ucm( 4871): Set mixer controls for HiFi enable 0
D/alsa_ucm( 4871): Setting mixer control: SLIMBUS_0_RX Audio Mixer MultiMedia1, value: 0
D/alsa_ucm( 4871): snd_use_case_set(): uc_mgr 0xb8409ab8 identifier _disdev value Line
D/alsa_ucm( 4871): disdev: device Line not enabled, no need to disable
D/libaudioamp( 4871): doRouting_Audience_Codec mode:0 Routes:0x0 Enable:0.
D/alsa_ucm( 4871): snd_use_case_set(): uc_mgr 0xb8409ab8 identifier _disdev value Speaker
D/alsa_ucm( 4871): Set mixer controls for Speaker enable 0
D/alsa_ucm( 4871): Setting mixer control: RX3 MIX1 INP1, value: ZERO
D/alsa_ucm( 4871): Setting mixer control: RX3 MIX1 INP2, value: ZERO
D/alsa_ucm( 4871): Setting mixer control: RX4 DSM MUX, value: CIC_OUT
D/alsa_ucm( 4871): Setting mixer control: RX3 Digital Volume, value: 0
D/alsa_ucm( 4871): Setting mixer control: RX4 Digital Volume, value: 0
D/alsa_ucm( 4871): Setting mixer control: LINEOUT1 Volume, value: 0
D/alsa_ucm( 4871): Setting mixer control: LINEOUT3 Volume, value: 0
D/alsa_ucm( 4871): Setting mixer control: SLIM TX3 MUX, value: ZERO
D/alsa_ucm( 4871): Setting mixer control: SLIM TX5 MUX, value: ZERO
D/AudioUsbALSA( 4871): exitPlaybackThread, mproxypfdPlayback: -1
E/AudioUsbALSA( 4871): return for pthreadjoin = 3
D/AudioUsbALSA( 4871): closeDevice handle 0x0
D/AudioUsbALSA( 4871): closeDevice handle 0x0
D/ALSADevice( 4871): setVoipVolume: volume 100
D/ALSADevice( 4871): setMixerControl:: name Voip Rx Volume value 100 index 0
D/AudioHardwareALSA( 4871): useCase HiFi Lowlatency
D/ALSADevice( 4871): route: devices 0x2 in mode 0
D/ALSADevice( 4871): No valid input device: 0
D/alsa_ucm( 4871): snd_use_case_set(): uc_mgr 0xb8409ab8 identifier _enadev value Speaker
D/ALSADevice( 4871): switchDevice: mCurTxUCMDevivce Line mCurRxDevDevice Speaker
D/libaudioamp( 4871): doRouting_Audience_Codec mode:0 Routes:0x2 Enable:1.
D/alsa_ucm( 4871): snd_use_case_set(): uc_mgr 0xb8409ab8 identifier _verb value HiFi Lowlatency
D/alsa_ucm( 4871): Set mixer controls for Speaker enable 1
D/alsa_ucm( 4871): acdb_id 14 cap 1 enable 1
D/ACDB-LOADER( 4871): ACDB -> send_afe_cal
D/alsa_ucm( 4871): Setting mixer control: SLIM_0_RX Channels, value: One
D/alsa_ucm( 4871): Setting mixer control: RX3 MIX1 INP1, value: RX1
D/alsa_ucm( 4871): Setting mixer control: RX3 MIX1 INP2, value: RX6
D/alsa_ucm( 4871): Setting mixer control: RX4 DSM MUX, value: DSM_INV
D/alsa_ucm( 4871): Setting mixer control: RX3 Digital Volume, value: 68
D/alsa_ucm( 4871): Setting mixer control: RX4 Digital Volume, value: 68
D/alsa_ucm( 4871): Setting mixer control: LINEOUT1 Volume, value: 66
D/alsa_ucm( 4871): Setting mixer control: LINEOUT3 Volume, value: 66
D/alsa_ucm( 4871): Setting mixer control: SLIM TX3 MUX, value: RMIX3
D/alsa_ucm( 4871): Setting mixer control: SLIM TX5 MUX, value: RMIX5
D/alsa_ucm( 4871): Set mixer controls for HiFi Lowlatency enable 1
D/alsa_ucm( 4871): Setting mixer control: SLIMBUS_0_RX Audio Mixer MultiMedia5, value: 1
D/ALSADevice( 4871): close: handle 0xb844c310 h 0x0
D/ALSADevice( 4871): open: handle 0xb844c310, format 0x2
D/ALSADevice( 4871): Device value returned is hw:0,14
D/ALSADevice( 4871): handle->format: 0x2
D/ALSADevice( 4871): setHardwareParams: reqBuffSize 1024 channels 2 sampleRate 48000
D/ALSADevice( 4871): setHardwareParams: buffer_size 2048, period_size 1024, period_cnt 2
I/AudioFlinger( 4871): HAL output buffer size 256 frames, normal mix buffer size 1024 frames
I/AudioMixer( 4871): found effect "Multichannel Downmix To Stereo" from The Android Open Source Project
E/MonoPipe( 4871): Failed to fetch local time frequency when constructing a MonoPipe (res = -32).  getNextWriteTimestamp calls will be non-functional
D/AudioPolicyManagerBase( 4871): setOutputDevice() changing device from (2) to (2)        force (1) delayMs (0) on Output (3)
I/AudioFlinger( 4871): AudioFlinger's thread 0xb5602008 ready to run
D/ALSAStreamOps( 4871): setParameters(): keyRouting with device 0x2
D/ALSAStreamOps( 4871): setParameters(): keyRouting with device 0x2
D/ALSADevice( 4871): route: devices 0x2 in mode 0
D/ALSADevice( 4871): No valid input device: 0
D/alsa_ucm( 4871): snd_use_case_set(): uc_mgr 0xb8409ab8 identifier _enadev value Speaker
D/alsa_ucm( 4871): Set mixer controls for HiFi Lowlatency enable 1
D/alsa_ucm( 4871): Setting mixer control: SLIMBUS_0_RX Audio Mixer MultiMedia5, value: 1
D/ALSADevice( 4871): switchDevice: mCurTxUCMDevivce Line mCurRxDevDevice Speaker
D/libaudioamp( 4871): doRouting_Audience_Codec mode:0 Routes:0x2 Enable:1.
D/ALSADevice( 4871): standby: handle 0xb844c310 h 0x0
D/alsa_ucm( 4871): snd_use_case_set(): uc_mgr 0xb8409ab8 identifier _verb value Inactive
D/alsa_ucm( 4871): Set mixer controls for HiFi Lowlatency enable 0
D/alsa_ucm( 4871): Setting mixer control: SLIMBUS_0_RX Audio Mixer MultiMedia5, value: 0
D/alsa_ucm( 4871): snd_use_case_set(): uc_mgr 0xb8409ab8 identifier _disdev value Line
D/alsa_ucm( 4871): disdev: device Line not enabled, no need to disable
D/libaudioamp( 4871): doRouting_Audience_Codec mode:0 Routes:0x0 Enable:0.
D/alsa_ucm( 4871): snd_use_case_set(): uc_mgr 0xb8409ab8 identifier _disdev value Speaker
D/alsa_ucm( 4871): Set mixer controls for Speaker enable 0
D/alsa_ucm( 4871): Setting mixer control: RX3 MIX1 INP1, value: ZERO
D/alsa_ucm( 4871): Setting mixer control: RX3 MIX1 INP2, value: ZERO
D/alsa_ucm( 4871): Setting mixer control: RX4 DSM MUX, value: CIC_OUT
D/alsa_ucm( 4871): Setting mixer control: RX3 Digital Volume, value: 0
D/alsa_ucm( 4871): Setting mixer control: RX4 Digital Volume, value: 0
D/alsa_ucm( 4871): Setting mixer control: LINEOUT1 Volume, value: 0
D/alsa_ucm( 4871): Setting mixer control: LINEOUT3 Volume, value: 0
D/alsa_ucm( 4871): Setting mixer control: SLIM TX3 MUX, value: ZERO
D/alsa_ucm( 4871): Setting mixer control: SLIM TX5 MUX, value: ZERO
D/AudioUsbALSA( 4871): exitPlaybackThread, mproxypfdPlayback: -1
D/AudioUsbALSA( 4871): closeDevice handle 0x0
D/AudioUsbALSA( 4871): closeDevice handle 0x0
I/r_submix( 4871): adev_open(name=audio_hw_if)
I/r_submix( 4871): adev_init_check()
I/AudioFlinger( 4871): loadHwModule() Loaded r_submix audio interface from Wifi Display audio HAL (audio) handle 4
I/AudioPolicyService( 4871): Loaded audio policy from QCOM Audio Policy HAL (audio_policy)
W/AudioPolicyManagerALSA( 4871): setPhoneState() setting same state 0
D/ThermalDaemon(  205): Sensor 'tsens_tz_sensor8' - alarm cleared 1 at 52.0 degC
D/ThermalDaemon(  205): Sensor 'tsens_tz_sensor7' - alarm cleared 1 at 54.0 degC

"ps aux | grep mediaserver" confirms the process is running again, this time it does not consume excessive CPU.

The problem exhibits for about a month and half, with various versions of CM11 nightlies. No difference if I turn "airplane mode" off or not.

I even wiped everything incl. sdcard, reflashed partition layout (and bootloader/modem/etc.) with aries_core_separated_single and re-installed clean CM11 + full gapps (per CM wiki). But no go.

Any idea?
 
@gonito : Hi, thnx for the link, I'll look into the module, it looks interesting.

Although I am not sure if that helps: mediaserver and media scanner seem to be related but not the same. Earlier, I have also checked ("lsof | grep mediaserv" and "lsof | grep sdcard") for processes if they get stuck on a particular directory or file, but to no avail - nothing in particular gained my attention.

At the moment, I installed mediaserver killer app and only shall see how it works in a long run. Luckily enough, the user does not use apps dependent on that process. The only issue is that if the mediaserver is not running, I cannot use MTP protocol through USB...

EDIT: a few days with mediaserver killer app proved to be a good workaround. Then, I froze it in TB and installed the Xposed module. For a week, no problems either. I do not dare to touch it to find out if it worked also w/o the module or not. Not unless the troubles start again ;-)
 
Last edited:
MiKhan said:
@gonito : Hi, thnx for the link, I'll look into the module, it looks interesting.

Although I am not sure if that helps: mediaserver and media scanner seem to be related but not the same. Earlier, I have also checked ("lsof | grep mediaserv" and "lsof | grep sdcard") for processes if they get stuck on a particular directory or file, but to no avail - nothing in particular gained my attention.

At the moment, I installed mediaserver killer app and only shall see how it works in a long run. Luckily enough, the user does not use apps dependent on that process. The only issue is that if the mediaserver is not running, I cannot use MTP protocol through USB...
Click to expand...
I haven't found a solution :(
With media server killer it's better but is not a solution.
The bug is present also on cm12?

Inviato dal mio MI 2S utilizzando Tapatalk
 
You must log in or register to reply here.

Similar threads

R
will we get the MIUI stable rom even when xiaomi move to Hyper OS ?
Replies
7
Views
3K
Questions & Answers
JiaiJ
J
T
Need Help with Unlocking Bootloader and Installing Official ROM on Xiaomi Pad 6
Replies
2
Views
4K
Questions & Answers
Tropical9914
T
senerex
[All-in-One] Xiaomi 14 (houji): Unlock Bootloader, Root, Flash TWRP, Flash ROM
Replies
55
Views
14K
Xiaomi 14 / Pro / Ultra
xenyth
X
V
Xiaomi mi 10t pro "the system has been destroyed" (Data loss is not an option!) [closed]
Replies
1
Views
4K
Questions & Answers
MeowMilev
M
Moonx3
Flashing Stock MIUI to return device, it's under warranty
Replies
8
Views
3K
Xiaomi Mi 11 / Pro / Ultra / Lite / 11TPro
Moonx3
Moonx3
Top Bottom
Back