HyperOS 1.0 HyperOS 1.0 STABLE RELEASE


This is definitely not normal
Oh, no, I'm not talking about WiFi issue, that's not normal and not happening in my device, I'm talking about using the device 1 hour and have a 15% drain, that's normal I think.

@pegasocv

At some point my device ran under stock MIUI 14 and when I switched to eu rom, I noticed the battery drained "faster" in HyperOS, I'd say it's the new UI, transitions, blur and transparent backgrounds tend to be more resource consuming, so naturally battery life gets affected.
 
  • Like
Reactions: pegasocv
Hello,
sorry for the English I use but I odopero a mechanical translator.

Don't feel bad I've been using Xiaomi.eu for so many years it's only since I switched to HyperOS that I've had my battery life almost halved and especially after half it goes down very fast and honestly if I knew before I would have stayed with Xiaomi.eu because the way I use the phone I had no gains switching to HyperOS. I keep hoping that a fix or trick will come out that will help me make the battery last longer because I even tried replacing the battery (maybe the old battery was the cause) but even with new battery it still lasts much less than when I was using Xiaomi.eu with old battery.

My experience with mi 11 3 years old I replaced the battery from reputable company so know it's good quality, I noticed really good improvement in battery life while on miui 14 , I did clean install of hyperOS and it's noticeably worse same setup same app use ,

I can't be bothered to install back miui 14 have to setup everything again and with new phones releasing in coming months I'll be upgrading so I'll just live with it for now
 
I have no idea what battery problems you have. You probably use some apps that run in the background and drain your battery.
 

Attachments

  • 1000007140.jpg
    1000007140.jpg
    261.8 KB · Views: 394
I have no idea what battery problems you have. You probably use some apps that run in the background and drain your battery.
I don't run any apps different to what I ran on miui 14 , Ll apps are official, and maybe you don't have the issue is because you have different model, likely not all models are effected, I have mi 11
 
Its xiaomi.eu problem and devs should look what is causing it
Just so you can understand :
- the devs may not have your device
- the devs may not have a second device with hyperos global to spend dozens of hours to compare battery life with different use cases
- the devs may not be able to replicate your issue
- the issue may be inherent to the china ROM, or to the integration of the Xiaomi.eu code to the china ROM
- it is a very bad time investment (compared to solving issues where people provide detailed logs)

The chances that they solve it without additional information (if it can be solved by them at all) are pretty low.
 
Hello, I have a question, I did the procedure to install the rom on the mi 11 ultra, everything went well, but I was questions, it is saying that I am on miui 13, is that right? Or did I do something wrong?
 

Attachments

  • WhatsApp Image 2024-10-14 at 16.56.01 (1).jpeg
    WhatsApp Image 2024-10-14 at 16.56.01 (1).jpeg
    41.3 KB · Views: 209
  • WhatsApp Image 2024-10-14 at 16.56.01.jpeg
    WhatsApp Image 2024-10-14 at 16.56.01.jpeg
    33.1 KB · Views: 213
Hello, I have a question, I did the procedure to install the rom on the mi 11 ultra, everything went well, but I was questions, it is saying that I am on miui 13, is that right? Or did I do something wrong?
Whatever Updater app you installed, it's not ours, so uninstall it.
 
  • Like
Reactions: banie01
I have a problem with Xiaomi.eu ROM.
I have a car diagnostic tool (Thinkdiag) that connects to my Xiaomi 13 Pro via bluetooth.
Before trying this ROM, the tool worked normally and was able to diagnose cars without any problems.
After installing the Xiaomi.eu ROM (Stable 1.0.12.0) the tool can no longer perform diagnostics.
I can connect my cell phone to the tool via Bluetooth, but it always gives an error when I try to scan a car.
So I decided to install the official Xiaomi 13 Pro ROM again to try it out and everything started working normally again.
There is no doubt that the problem is in the Xiaomi.eu ROM.
I don't know what the problem is but if anyone knows the solution and can share it I would appreciate it.
 
Whatever Updater app you installed, it's not ours, so uninstall it.
I got it, friend, I did the installation, I think I used the wrong executable, I had used the update, now I used the other one, Obrigado♥
 

Attachments

  • WhatsApp Image 2024-10-14 at 20.20.44.jpeg
    WhatsApp Image 2024-10-14 at 20.20.44.jpeg
    30.7 KB · Views: 171
I have a problem with Xiaomi.eu ROM.
I have a car diagnostic tool (Thinkdiag) that connects to my Xiaomi 13 Pro via bluetooth.
Before trying this ROM, the tool worked normally and was able to diagnose cars without any problems.
After installing the Xiaomi.eu ROM (Stable 1.0.12.0) the tool can no longer perform diagnostics.
I can connect my cell phone to the tool via Bluetooth, but it always gives an error when I try to scan a car.
So I decided to install the official Xiaomi 13 Pro ROM again to try it out and everything started working normally again.
There is no doubt that the problem is in the Xiaomi.eu ROM.
I don't know what the problem is but if anyone knows the solution and can share it I would appreciate it.
Where logs?
 
Good afternoon..
it would be great if someone could help install the rom.. because I haven't passed the 1st phase yet.. and hope still remains...
Poco 6 Pro
 
Scroll a bit up and you will find the solution. It was posted multiple times

Sent from my 2210132G using Tapatalk
ended up using the adb shell pm compile -a -f --full earlier

didnt work the first time and now after uninstalling my modules it works i guess, some report back "failure" though
 
Where logs?
Unfortunately I didn't extract a log because I reinstalled the official ROM of the 13 Pro to see if the problem was the ROM and at the moment this is the ROM I'm using because it works.
I thought there might be an easy fix for this problem so I asked on the forum.
It's so much work to install ROMs, configure your phone, test the apps and then have to reinstall another ROM (because the other one doesn't work well) and do the same process again, that I was trying to avoid that.
If there isn't a solution to this problem, for now I'll stick with the official ROM and maybe give Xiaomi.eu another chance again when HyperOS 2.0 comes out.
Thanks.
 
Good morning, after updating to Hyperos with my Xiaomi 12, I have no call ringtones volume / vibration. I correclty have them on messages, but no on calls. I checked in settings and everything is ok.
I noticed that when I look for an online ringtone in themes, I can hear it, but after downloading and trying to listen to it there is no sound even into the theme app. Did you get any simial experience?
Thank you for your work!
 
I want to update wife's mi10pro that is on MIUI13 weekly 22.7.19. (I didn't update it since I gave it to her a lot of time ago).
Is it possible to update directly to HyperOS Stable directly without deleting any data? She would cut my balls off if I delete something.

The reason for updating is basically she can't use NFC payments on current version.

Thank you!
I did a dirty Fastboot flash on my 10pro. Everything working so far except Bluetooth for Dual Apps.
 
Anyone tried 1.0.6 on VENUS I just saw upload. Too scared to try. Maybe i will back up my photos and try.

edit: heuheuheuheuheuheuh trying now

1729034060378.png
 
Last edited:
VENUS 1.0.6 No working, first boot to screen and NO SIM CARD DETECTED, I click "accept" on the Xiaomi service agreement. I could see wifi network, though. I did not try to connect. I just reboot the phone and once it boot, i see the lock screen for 1 second and then it crash to the Xiaomi HyperOS screen. It is not "boot loop" but the whole UI crashing. I assume it is when it initialize the SIM card.
 
I revert to 1.0.3 and phone work, but say "let the phone reboot fully before opening apps" or something. I am crying. The sobs, the sorry sorrows.,.,.,.,

but

i flash back to 1.0.6. This time. Overwrite MODEM.IMG from 1.0.3 into 1.0.6 folder

BINGO

we have the truth

the good fix

incredible
Screenshot_2024-10-15-20-22-31-792_com.android.settings.jpg

if you find this helpful, pleAse provide one liek to the message. I accept personal messages. Regards
 
Yes❣️

@Einar
Sorry dude, but I just feel 15% drain is normal under such conditions in HyperOS, which consumes more battery than MIUI because obvious reasons
Nö offence taken by me.
I just noticed it, it doesn't bother me that much, that I'd say HOS is crap. I survive almost a day without recharging and I have the opportunity to do so If needed. And the current drain is only on the way to work and back home, I'm Not on the phone for several hours.

Only really annoying issue with HOS is the missing connection to my car.
 

Similar threads