HyperOS 1.0 HyperOS 1.0 STABLE RELEASE


Is there a fix?
Not really, Android 15 is the only hope. Before we complain the phone is not fast enough. So now they made it super fast. But it uses lot of power doing so. HyperOS has the best performance and speed, but it uses the hardware fully. The new Android 14 Zram feature pack and unpack uses a lot of CPU. That's just how it is
 
  • Like
Reactions: SafuPT
No, it's wifi on Poco f6
Even without wifi I see how much battery eats opening, scrolling etc by using FKM in the notification. Maybe it's the new cache or it's the poor optimization in this device, I don't know. The 8s gen 3 is new and they didn't optimize it.
If you see people with high SOT for sure they are tuning the CPU by doing downclock or disabling some cores.
Another thing it's the degradation is the battery. People with just 4 months old they have 90% of the real capacity.
My poco X3 pro was cheap too. But the materials were good, still getting almost the same SOT after 3 years. And the X series should be less premium than F series I think, but I don't feel like that.
 
Last edited:
Even without wifi I see how much battery eats opening, scrolling etc by using FKM in the notification. Maybe it's the new cache or it's the poor optimization in this device, I don't know. The 8s gen 3 is new and they didn't optimize it.
If you see people with high SOT for sure they are tuning the CPU by doing downclock or disabling some cores.
Another thing it's the degradation is the battery. People with just 4 months old they have 90% of the real capacity.
My poco X3 pro was cheap too. But the materials were good, still getting almost the same SOT after 3 years. And the X series should be less premium than F series I think, but I don't feel like that.
I have got the feeling that the calculating within the battery app is not correct. Even if I watch over an hour YouTube, still YouTube uses more energy than screen. Normally screen should be using the most energy.
People who say they get about 8 hours sot.... no way!
I have both phones the Poco F6 and the X6 Pro and with the X6 Pro I get about 5 to 5.5 hours sot, while watching YouTube, using telegram, etc and mostly no gaming.
Do, of someone gets around 5 to 6 hours sot on the F6, it's normal
 
I have got the feeling that the calculating within the battery app is not correct. Even if I watch over an hour YouTube, still YouTube uses more energy than screen. Normally screen should be using the most energy.
People who say they get about 8 hours sot.... no way!
I have both phones the Poco F6 and the X6 Pro and with the X6 Pro I get about 5 to 5.5 hours sot, while watching YouTube, using telegram, etc and mostly no gaming.
Do, of someone gets around 5 to 6 hours sot on the F6, it's normal
I don't check the battery within hyper os battery section. I use external apps like FKM and gsam, and they are accurate. The most battery drain is the kernel and it contains the wifi and others.
My current stats are after 34 hours:
36% battery left, only 2h 25min of SOT. Active drain 13,60% and idle almost 1%. That's really bad and I have several apps with no background execution configured in the battery setting, to avoid too much drain of not necessary apps. Also, I freeze most of the Xiaomi apps.
 
What is the latest version 1.0.17 changelog for xiaomi 13 ultra? The latest version does not appear on the Miuiver website
 
Hi i messed up with my phone. The installation of hyper os from custom rom went corrupt and i tried downgrade without checking ARB and it gave me errors of mismatched file and device and also ARB error. I want to remove the corrupt installation and install EU rom. I am also unable to install any recovery (orangefox twrp) via fastboot. Someone suggested i install EU rom as it is hybrid and that will clean the device.
I am in pakistan and sourceforge doesn't let me download, telegram is also on proxy. I am unable to download. Can anyone please upload the sourceforge file to google drive. its a humble request.

device: SPES
eu rom link: https://sourceforge.net/projects/xi...mi.eu_SPESN_OS1.0.4.0.TGKMIXM_13.zip/download
 
Hi i messed up with my phone. The installation of hyper os from custom rom went corrupt and i tried downgrade without checking ARB and it gave me errors of mismatched file and device and also ARB error. I want to remove the corrupt installation and install EU rom. I am also unable to install any recovery (orangefox twrp) via fastboot. Someone suggested i install EU rom as it is hybrid and that will clean the device.
I am in pakistan and sourceforge doesn't let me download, telegram is also on proxy. I am unable to download. Can anyone please upload the sourceforge file to google drive. its a humble request.

device: SPES
eu rom link: https://sourceforge.net/projects/xi...mi.eu_SPESN_OS1.0.4.0.TGKMIXM_13.zip/download
there you go my dude, should be uploaded in ~ 10 minutes.
hope it will help you
 
Even without wifi I see how much battery eats opening, scrolling etc by using FKM in the notification. Maybe it's the new cache or it's the poor optimization in this device, I don't know. The 8s gen 3 is new and they didn't optimize it.
If you see people with high SOT for sure they are tuning the CPU by doing downclock or disabling some cores.
Another thing it's the degradation is the battery. People with just 4 months old they have 90% of the real capacity.
My poco X3 pro was cheap too. But the materials were good, still getting almost the same SOT after 3 years. And the X series should be less premium than F series I think, but I don't feel like that.
Where you have see that people have 90% of battery after only 4 month ?
 
Where you have see that people have 90% of battery after only 4 month ?
Screenshot_2024-10-19-01-03-43-588_com.digibites.accubattery-edit.jpg
 
Last edited by a moderator:
I just dirty flashed from 1.0.5 to 1.0.6 for star Mi11 Ultra. Immediately Gwallet, certain banking apps, xiaomi community app and youtube music cannot be opened. Tried clearing dalvik and cached and rebooting including reflashing the 1.0.6 ROM but no avail. Any suggestions? I am thinking of flashing down back to 1.0.5; does that count as a downgrade and where can i get the file as the sourceforge dir only contains latest ROM versions. Thanks
 
Last edited:
  • Like
Reactions: ultra3000
I just dirty flashed from 1.0.5 to 1.0.6 for star Mi11 Ultra. Immediately Gwallet, certain banking apps, xiaomi community app and youtube music cannot be opened. Tried clearing dalvik and cached and rebooting including reflashing the 1.0.6 ROM but no avail. Any suggestions? I am thinking of flashing down back to 1.0.5; does that count as a downgrade and where can i get the file as the sourceforge dir only contains latest ROM versions. Thanks
I have already tried to dirty flash to 1.0.5. Don't do that. It messed up system completly..
 
I just dirty flashed from 1.0.5 to 1.0.6 for star Mi11 Ultra. Immediately Gwallet, certain banking apps, xiaomi community app and youtube music cannot be opened. Tried clearing dalvik and cached and rebooting including reflashing the 1.0.6 ROM but no avail. Any suggestions? I am thinking of flashing down back to 1.0.5; does that count as a downgrade and where can i get the file as the sourceforge dir only contains latest ROM versions. Thanks
Here I made a thread in "bugs", so if You get any new information or solution, just share it there. It may help in the future. Thanks.

 
Here I made a thread in "bugs", so if You get any new information or solution, just share it there. It may help in the future. Thanks.

It has been said several times but use the command adb shell pm compile -a -f --full via a PC while the device is running.
 
Last edited:
  • Like
Reactions: Tony99
It has been said several times but use the command adb shell pm compile -a -f --full via a PC while the device is in fastboot.
I have got an error code /system/bin/sh: pm: inaccessible or not found
These commands are entered while the device is running. Not via fastboot.
They are ADB commands.
Code:
adb devices 
adb shell pm compile -a -f --full
adb shell reboot

The "USB debugging" and "USB debugging (Security settings)" functions must be enabled in the "developer options" settings.
 

Attachments

  • Screenshot_2024-10-19-12-26-48-098_com.android.settings-edit.jpg
    Screenshot_2024-10-19-12-26-48-098_com.android.settings-edit.jpg
    522.7 KB · Views: 643
Last edited:
These commands are entered while the device is running. Not via fastboot.
They are ADB commands.
Code:
adb shell pm compile -a -f --full
adb shell reboot

The "USB debugging" and "USB debugging (Security settings)" functions must be enabled in the "developer options" settings.
I have no option to enter developer settings. At the time of trying to repair system at 1.0.6.0 developer settings was not accesible. When I tried to enter developer settings, I have got error prompt, that "settings stopped working" or immediet reboot.
 
Here I made a thread in "bugs", so if You get any new information or solution, just share it there. It may help in the future. Thanks.

Managed to find a workaround but not the cause of it

Potential Fix:
1. Reinstall all apps affected (being unable to start app). It is noticed that apps that require Google authentication failed to launch or those requiring Xiaomi credentials. Apps which logged in via platform specific userid were not affected
2. This solved all apps except Google Wallet. The app still could not launch (not an issue of not passing Play Protect security checks). However upon installing the Gpay apk patch, i was able to open Google Wallet again

Why is this happening i have no idea. but it works and phone's working normally (for now)
 
Last edited:
I have no option to enter developer settings. At the time of trying to repair system at 1.0.6.0 developer settings was not accesible. When I tried to enter developer settings, I have got error prompt, that "settings stopped working" or immediet reboot.
Try reinstalling the ROM via fastboot.
If you are using root and mods, remove them before installing the ROM.
 

Similar threads