HyperOS 1.0 HyperOS 1.0 STABLE RELEASE


lisandrocq said:
Thank you for answer, this is the result:

star:/ $ getprop | grep -F 'ro.boot.'
[ro.boot.baseband]: [msm]
[ro.boot.boot_devices]: [soc/1d84000.ufshc]
[ro.boot.bootdevice]: [1d84000.ufshc]
[ro.boot.bootreason]: [reboot,userrequested]
[ro.boot.camera.config]: [0]
[ro.boot.console]: [ttyMSM0]
[ro.boot.dp]: [0x0]
[ro.boot.dtb_idx]: [0]
[ro.boot.dtbo_idx]: [25]
[ro.boot.dynamic_partitions]: [true]
[ro.boot.flash.locked]: [1]
[ro.boot.force_normal_boot]: [1]
[ro.boot.fstab_suffix]: [default]
[ro.boot.hardware]: [qcom]
[ro.boot.hardware.sku]: [star]
[ro.boot.hwc]: [CN]
[ro.boot.hwlevel]: [MP]
[ro.boot.hwversion]: [2.9.1]
[ro.boot.keymaster]: [1]
[ro.boot.memcg]: [1]
[ro.boot.oled_panel_id]: [K2_0A_MP]
[ro.boot.oled_wp]: [01f50bb00c4c]
[ro.boot.product.hardware.sku]: [star]
[ro.boot.product.vendor.sku]: [lahaina]
[ro.boot.ramdump]: [disable]
[ro.boot.secureboot]: [1]
[ro.boot.serialno]: [f62b276f]
[ro.boot.slot_suffix]: [_a]
[ro.boot.ufsid]: [0x198]
[ro.boot.usbcontroller]: [a600000.dwc3]
[ro.boot.verifiedbootstate]: [green]
star:/ $
Click to expand...
All looks great, I don't see what your complaint is about. You're passing BASIC_INTEGRITY and DEVICE_INTEGRITY, which is the maximum you're going to pass with an unlocked bootloader. I've no idea why you're trying to test for SafetyNet, it's obsolete.
 
Igor Eisberg said:
All looks great, I don't see what your complaint is about. You're passing BASIC_INTEGRITY and DEVICE_INTEGRITY, which is the maximum you're going to pass with an unlocked bootloader. I've no idea why you're trying to test for SafetyNet, it's obsolete.
Click to expand...
I can't use banking apps, one week ago I used correctly all apps and pass the safety net, 2 days ago I received the error my device not have the security required to use baking apps.
Sorry my English is not good
 
lisandrocq said:
I can't use banking apps, one week ago I used correctly all apps and pass the safety net, 2 days ago I received the error my device not have the security required to use baking apps.
Sorry my English is not good
Click to expand...
Your banking app is at fault then.
 
lisandrocq said:
I can't use banking apps, one week ago I used correctly all apps and pass the safety net, 2 days ago I received the error my device not have the security required to use baking apps.
Sorry my English is not good
Click to expand...
Try to root with magisk and use exclusion list, it's hide modification for each apps, with that I can use my bank app
1000012973.jpg
 
  • Like
Reactions: lisandrocq
Igor Eisberg said:
PERIDOT, VENUS, REDWOOD, PSYCHE reuploaded to fix Xiaomi Share cannot be turned on.

VEUXG, PSYCHE reuploaded to fix Play Integrity not passing DEVICE_INTEGRITY.


As JiaiJ said, our ROM is based on SAPPHIREN, latest version is still OS1.0.3.0.
Click to expand...
Is working great on veuxg. GPay now is working, device and basic integrity pass. Thank you very much
 
Wifi 7 is not support on xiaomi.eu rom on the xiaomi 13.
I have two Xiaomi 13's one EU and one CN.
The CN version has the xiaomi.eu ROM and it no longer supports WIFI 7.
Both connected to the same network/WIFI which I configured correctly.
But as you can see in the screenshots the xiaomi.eu ROM isn't capable of WIFI 7.


It's nothing to do with the router, I've checked settings 100 times over, Every other device connects one WIFI 7. but Xiaomi.EU rom doesn't. (i've also confirmed that the Xiaomi 13 at a HW level supports WIFI 7 and did connect to WIFI 7 before installing xiaomi.eu rom.
 

Attachments

  • CN Xiaomi EU ROM.jpg
    CN Xiaomi EU ROM.jpg
    224.3 KB · Views: 201
  • Official EU ROM.jpg
    Official EU ROM.jpg
    241.9 KB · Views: 215
  • Like
Reactions: ptkruz
OberZine said:
Wifi 7 is not support on xiaomi.eu rom on the xiaomi 13.
I have two Xiaomi 13's one EU and one CN.
The CN version has the xiaomi.eu ROM and it no longer supports WIFI 7.
Both connected to the same network/WIFI which I configured correctly.
But as you can see in the screenshots the xiaomi.eu ROM isn't capable of WIFI 7.


It's nothing to do with the router, I've checked settings 100 times over, Every other device connects one WIFI 7. but Xiaomi.EU rom doesn't. (i've also confirmed that the Xiaomi 13 at a HW level supports WIFI 7 and did connect to WIFI 7 before installing xiaomi.eu rom.
Click to expand...
Well... none of us is planning on buying a Wi-Fi 7 router anytime soon, as far as I'm aware, so there's no way to check your issue.
 
  • Like
Reactions: Guirymax
My device is NUWA with stable version 1.0.8.0.
In the photo editing function of the gallery app, some filters cannot be downloaded and used.
In addition, the security scanning function cannot work since the HyperOS update, this function works normally with the MIUI version running on Android 13.
 

Attachments

  • IMG_20240721_115910.jpg
    IMG_20240721_115910.jpg
    120.7 KB · Views: 124
  • IMG_20240721_115936.jpg
    IMG_20240721_115936.jpg
    107.1 KB · Views: 117
  • IMG_20240721_115959.jpg
    IMG_20240721_115959.jpg
    134.3 KB · Views: 113
  • IMG_20240721_120014.jpg
    IMG_20240721_120014.jpg
    127.5 KB · Views: 114
  • IMG_20240721_120030.jpg
    IMG_20240721_120030.jpg
    118.5 KB · Views: 112
  • IMG_20240721_120050.jpg
    IMG_20240721_120050.jpg
    113.9 KB · Views: 109
  • Screenshot_2024-07-21-12-01-30-472_com.miui.securitycenter.jpg
    Screenshot_2024-07-21-12-01-30-472_com.miui.securitycenter.jpg
    441.2 KB · Views: 122
austinjklim said:
Peridiot F6 Latest 1.0.14, l'animazione di ricarica è stata corretta (l'ho aggiornata solo un giorno fa), le statistiche della batteria mostrano ancora che il Wi-Fi si sta "riportando" scaricando. Non sono sicuro che lo scaricamento sia accurato, ma solo per far sapere a tutti gli altri.
Click to expand...
P can you check that they have inserted the magic eraser pro and AI cropping in the gallery?
 
Igor Eisberg said:
Well... none of us is planning on buying a Wi-Fi 7 router anytime soon, as far as I'm aware, so there's no way to check your issue.
Click to expand...
If you want a guinea pig I don't mind volunteering, I do have a Wi-Fi 7 router after all ;)

If it's any help,
I've noticed the 320 MHz channel width is locked on xioami.eu ROM but on Official CN ROM its not locked, it's also unlocked on Official EU ROM.
I doubt it's region dependent, but I could be wrong, I'm based in the UK where we do have some strange restrictions on Wi-Fi standards but as said, can connect at full speed on official ROMS.
 
  • Like
Reactions: mnikolce
OberZine said:
If you want a guinea pig I don't mind volunteering, I do have a Wi-Fi 7 router after all ;)

If it's any help,
I've noticed the 320 MHz channel width is locked on xioami.eu ROM but on Official CN ROM its not locked, it's also unlocked on Official EU ROM.
I doubt it's region dependent, but I could be wrong, I'm based in the UK where we do have some strange restrictions on Wi-Fi standards but as said, can connect at full speed on official ROMS.
Click to expand...
The reason why this ROM doesn't support the 320MHz is that we need to flash the modemfirmware.img of the EEA/Global to work (or you cannot get signal), and that is modified to prevent the use of larger spectrum provided with WiFi 6E and 7 (6GHz etc.) according to the local and EU law.
It needs to adapt the modemfirmware.img of the CN version to the our variant, but seems to be untouched since the initial release.
 
zSyntex said:
The reason why this ROM doesn't support the 320MHz is that we need to flash the modemfirmware.img of the EEA/Global to work (or you cannot get signal), and that is modified to prevent the use of larger spectrum provided with WiFi 6E and 7 (6GHz etc.) according to the local and EU law.
It needs to adapt the modemfirmware.img of the CN version to the our variant, but seems to be untouched since the initial release.
Click to expand...
So the Official EEA ROM on my second Xiaomi 13 supports 320Mhz because the modemfirmware.img supports it? So you're saying we need need that modem firmware on this rom and we'll get the 320Mhz channel width unlocked? I'm connected at 160Mhz channel width on 6Ghz at the moment and would love to get 320Mhz to unlock the full potential of this phone.
 
Why does HyperOS Xiaomi.eu Stable tell me there's an update? The update version number is the same as the current version....?
Anything i'm not seeing?
Screenshot_2024-07-21-18-32-09-396_com.android.settings.jpgScreenshot_2024-07-21-18-32-14-871_com.android.updater.jpg
 
OberZine said:
So the Official EEA ROM on my second Xiaomi 13 supports 320Mhz because the modemfirmware.img supports it? So you're saying we need need that modem firmware on this rom and we'll get the 320Mhz channel width unlocked? I'm connected at 160Mhz channel width on 6Ghz at the moment and would love to get 320Mhz to unlock the full potential of this phone.
Click to expand...
In your case it's modem.img (modemfirmware.img exists on newer devices). Try flashing it from the latest EEA ROM and see it if helps with your issue.
 
Igor Eisberg said:
In your case it's modem.img (modemfirmware.img exists on newer devices). Try flashing it from the latest EEA ROM and see it if helps with your issue.
Click to expand...
Where can I get it from?
I think I have the correct file downloaded from the correct place but I just wanna be sure.
Will the EEA firmware work on a CN device?
Is there any clarity on how to flash it, e.g. from twrp?
 
Igor Eisberg said:
In your case it's modem.img (modemfirmware.img exists on newer devices). Try flashing it from the latest EEA ROM and see it if helps with your issue.
Click to expand...
gogocar62 said:
Try it and see.
Soubor "modem.img" získáte z firmware nebo fastboot EEA ROM.
Click to expand...
I tried flashing it no issues, however it flashes instantly which is strange, considering its a 350+MB img.
and nothing changes on the phone. So I don't think it flashed correctly or at all.
 

Attachments

  • Screenshot_2024-07-22-06-06-49.png
    Screenshot_2024-07-22-06-06-49.png
    100.4 KB · Views: 136
  • Screenshot_2024-07-22-06-06-54.png
    Screenshot_2024-07-22-06-06-54.png
    146 KB · Views: 133
The modem must be extracted from the firmware then use this CMD:

fastboot set_active a
fastboot flash modemfirmware_ab modemfirmware.img
fastboot flash modem_ab modem.img
fastboot reboot
 
Last edited:
This is modem.img not modemfirmware.img.
That is a big difference.

The command in CMD is as follows:
Code: 
fastboot set_active a
fastboot flash modem_ab modem.img
fastboot reboot

And it can also be installed via TWRP as I mentioned in the previous post.
 
Last edited:
gogocar62 said:
This is modem.img not modemfirmware.img.
That is a big difference.

The command in CMD is as follows:
Code: 
fastboot set_active a
fastboot flash modem_ab modem.img
fastboot reboot

And it can also be installed via TWRP as I mentioned in the previous post
Click to expand...
I did try via TWRP, and I tried via CMD too. I tried with CN, Global, and EU and it made no difference whatsoever.
Maybe they lied on the spec sheet for the Xiaomi 13 CN variant? maybe it doesn't include Wi-Fi 7 properly.
 
  • Like
Reactions: Eclipse1991
You must log in or register to reply here.

Similar threads

ingbrzy
  • Sticky
HyperOS 2.0 HyperOS 2.0 STABLE RELEASE
Replies
2K
Views
1M
HyperOS
MotleyCrue
M
ingbrzy
  • Locked
HyperOS 1.0 24.7.28 (Final)
Replies
292
Views
456K
HyperOS
Igor Eisberg
Igor Eisberg
ingbrzy
  • Locked
HyperOS 1.0 24.7.22/25/26
Replies
51
Views
55K
HyperOS
Ahaba
A
ingbrzy
  • Locked
HyperOS 1.0 24.7.1
Replies
54
Views
48K
HyperOS
Mistery88
M
ingbrzy
  • Locked
HyperOS 1.0 24.7.15/17
Replies
87
Views
75K
HyperOS
KGVER
KGVER
Top Bottom
Back