buralardayim
Members
- Oct 3, 2023
- 22
- 15
Can I switch from OS1.0.24.7.8.DEV to OS1.0.10.0.UMCCNX Stable? Seems stable release date newer. is this a update right?
HyperOS 1.0 HyperOS 1.0 STABLE RELEASE
- Thread starter ingbrzy
- Start date
@buralardayim No, it is not considered an update, it is not guaranteed to work without an clean install.
- Oct 6, 2016
- 9,894
- 322
I'm not aware of any device with a Dolby Atmos encoder. They only have decoders, which are for playback.
AsadP
Members
- Oct 26, 2016
- 277
- 52
I second this, I'm pretty sure all my Xiaomi/Poco phones I've had (Atmos enabled) have had it for decoding/playback.
qu4k3r
Members
- Aug 16, 2021
- 48
- 30
I just updated my Poco F3 from MIUI 14 to HyperOS 1.0.6.0.TKHCNXM. I updated without formatting data and everything seems to be fine (i.e. nothing is lost or out of place). This time I did not disable any security features like PIN and fingerprints and everything worked after the update. Excellent work on Alioth updates - much thanks to the EU team again!
Sir do you have an alternate link for hyperos 1.0.6.0? I'm only getting 95.9 kb download speed on SF.
qu4k3r
Members
- Aug 16, 2021
- 48
- 30
Sorry, I only know the one on the first page of this thread. It does take a long time to download.
SourceForge Link to Alioth
qu4k3r
Members
- Aug 16, 2021
- 48
- 30
I should have stated that it was from the stable MIUI to the stable HyperOS rom, not the weekly ones.
Hi everyone I'm on xiaomi.eu rom 1.0.12.0.UMACNXM Ishtar
and facing some strange bug when I'm listening music the volume randomly turns loud and it can remain the entire music or turn back to normal between tracks I'm using poweramp player and recently switched to aimp and the problem apears to be fixed but it happened again also I'm using a vidvie hs624 earphone and an sony dac adapter
If someone can give some advice to fix this or you think that is hardware related because this doesn't happen in speaker
and facing some strange bug when I'm listening music the volume randomly turns loud and it can remain the entire music or turn back to normal between tracks I'm using poweramp player and recently switched to aimp and the problem apears to be fixed but it happened again also I'm using a vidvie hs624 earphone and an sony dac adapter
If someone can give some advice to fix this or you think that is hardware related because this doesn't happen in speaker
poweruser44
Members
- Jun 22, 2023
- 7
- 15
pegasocv
Members
- Nov 15, 2021
- 31
- 20
Hello,
POCO F3 currently I have installed the HyperOS by xiomi.eu 1.0.3.0 TKHCNXM Stable I saw that there is download for xiaomi.eu_ALIOTH_OS1.0.6.0.TKHCNXM_13.zipper is this the correct update for my POCO F3?
Why if I click "Check for updates" from the cell phone, it tells me that the system is already updated?
Thank you.
POCO F3 currently I have installed the HyperOS by xiomi.eu 1.0.3.0 TKHCNXM Stable I saw that there is download for xiaomi.eu_ALIOTH_OS1.0.6.0.TKHCNXM_13.zipper is this the correct update for my POCO F3?
Why if I click "Check for updates" from the cell phone, it tells me that the system is already updated?
Thank you.
gogocar62
XM12 Tester
- Apr 22, 2021
- 4,972
- 322
Yes, it is the correct ROM
Migration of OTA metadata source
We have migrated our OTA metadata source from miuipolska.pl to GitHub due to various reasons. Due to that, you'll have to update to a newer ROM manually once so that the Updater app gets updated with the new source. This will also allow countries that were previously blocked as an anti-DDoS...
xiaomi.eu
I am using Xiaomi 14 Pro with Shennong
I think there Is a bug with the control bar when sliding it down to adjust the screen light it instantly closes the control bar so that it's not really smooth to make adjustments to the screen light.
I think there Is a bug with the control bar when sliding it down to adjust the screen light it instantly closes the control bar so that it's not really smooth to make adjustments to the screen light.
@sinan712 Reported many times.
xiaomi.eu
Invalid - Old control center brightness.
When i move brightness slider, control center is closing!
xiaomi.eu
Hello everyone. I installed the latest stable firmware (xiaomi.eu_VENUS_OS1.0.3.0.UKBCNXM_14.zip) on my mi 11 a week ago. Everything was fine until today. The phone ran out of battery and turned off, when I got home I put it on charge, turned it on (charge 6%), opened the curtain, turned off the power saving mode, opened the folder on the main screen and the phone stopped responding to clicks. After pressing the power button several times, the screen went dark, now the phone does not respond to the power button, or to the power and volume-. When connected to the charger, the phone does not respond either. What could be the solution to this problem? Thanks in advance.
Edited: when connected to a computer, the computer plays a connection sound, but there is no phone in the device manager.
Edited: when connected to a computer, the computer plays a connection sound, but there is no phone in the device manager.
Last edited:
Try to empty the battery, the phone turned off and watch what append
@Vampiro , @Pepitp The battery is discharged. The "charge me" icon appeared. I charged it until it became possible to launch fastboot. I tried to flash "xiaomi.eu_multi_MI11_V14.0.11.0.TKBCNXM_v14-13.zip". I attached a screenshot of the log of the latest messages. The phone again does not respond to button presses. It seems that the motherboard has come to an end.
Just finished flashing latest stable build on my Xiaomi 14 (houji). Was stuck on fastboot but got over it. Then I had no cell service, which I fixed by flashing modem and modemfirmware images from the official EU firmware. I chose the EU version as the official stock ROM was the EU variant when I bought the phone.
Now I see forum posts about flashing the Global versions of these images, so I guess my question is - why? What is the modem(firmware) difference between EU and Global? Should I flash the ones from the Global instead? edit: I guess there's an argument to be made "if it works, why bother". But from my limited understanding of cell modems and basebands; it can be the case where there is signal and service but of lower quality if you do not flash correct images. If someone could enlighten me, I would be more than grateful
Now I see forum posts about flashing the Global versions of these images, so I guess my question is - why? What is the modem(firmware) difference between EU and Global? Should I flash the ones from the Global instead? edit: I guess there's an argument to be made "if it works, why bother". But from my limited understanding of cell modems and basebands; it can be the case where there is signal and service but of lower quality if you do not flash correct images. If someone could enlighten me, I would be more than grateful
Are you using a USB C PD charger? Try using a "normal" charger to get it charged up. My phone went dead, and the PD was negotiating charging parameters, started out low, and the phone dies again. So the cycle continues. So in used my old LG charger to get it started again.
leledumbo
Members
- Jul 26, 2013
- 435
- 67
1.0.8.0 on Xiaomi 13 Pro (Nuwa) introduces battery drain others also experience, despite different version number. With downgrading no longer an option (tried downgrading to 1.0.7.0, no apps other than some system one can open, TWRP cannot decrypt storage, gotta flash 1.0.8.0 again to resolve), I can only suffer until the next update. Darn, I should've read the forum before joining the bandwagon.
Dafuq moment is when I realize that wi-fi is considered on and eating battery while I've been turning it off since unplugged:
Dafuq moment is when I realize that wi-fi is considered on and eating battery while I've been turning it off since unplugged:
Last edited:
I used many different power supplies: the original Xiaomi 33W, the original Huawei, the iPad 18W. I also used different cables from Xiaomi. The result is the same.
MrGusRH
Members
- Sep 29, 2018
- 29
- 15
Hi My friend.
I updated hyperOS 1.0.6.0 stable on my sweet k6a.
I have problems with some applications that close and in the security center, the virus scanner stays at 8% and does not advance. Thank you
I updated hyperOS 1.0.6.0 stable on my sweet k6a.
I have problems with some applications that close and in the security center, the virus scanner stays at 8% and does not advance. Thank you
Attachments
Last edited by a moderator:
