HyperOS 1.0 HyperOS 1.0 STABLE RELEASE

[Jackalito]

Need help, guys. I was using my Xiaomi Mi 11 (Venus) with the latest stable MIUI ROM and had updated the XiaomiEUModule to the latest version 2024.05.22, and everything was working fine. But suddenly, overnight, I couldn't use the phone to make contactless payments. This issue started like 2 weeks ago or so.

So, today I decided to flash the first stable HyperOS ROM for my phone and try again, but I'm getting the same result. I have tried to reapply the latest EUModule update, cleaned cache and data from the Play Store and the Wallet apps from Google, but nothing so far has worked for me.

I'm going to include screenshots to illustrate the SafetyNet test results:

Can anyone give me some advice as to how to try and solve it?

Thanks a lot to all the developers for all their hard work - it's greatly appreciated.

Thank you in advance to anyone who can help me with this.

Cheers, everyone!

EDIT: Nevermind, just fixed it using these instructions:
https://xiaomi.eu/community/threads/play-integrity-fix-and-wallet-issues.73723/#post-731868

 

[sinan712]

@sinan712 Reported many times.

Invalid - Old control center brightness.

When i move brightness slider, control center is closing!

xiaomi.eu

Unfortunately found no fix for this.
How can this be a problem since month

 

[CR0OK]

Hello,

QR payment working? Scanner app works normally, even as camera. But if i try Pay with QR code button in all three bank apps which i have, it force close whole bank app.

I try reset data with scanner app, reinstalling bank apps, but no success.

Can you try help me guys or i must factory reset my whole device?

Thanks :-(.

(i get force close message about HyperOS error, if i click QR button in bank app, but if i click i want details, nothing happens, bank app only restart)

device: mondrian, last stable

 

[leledumbo]

Hello,

QR payment working? Scanner app works normally, even as camera. But if i try Pay with QR code button in all three bank apps which i have, it force close whole bank app.

I try reset data with scanner app, reinstalling bank apps, but no success.

Can you try help me guys or i must factory reset my whole device?

Thanks :-(.

(i get force close message about HyperOS error, if i click QR button in bank app, but if i click i want details, nothing happens, bank app only restart)

device: mondrian, last stable

It depends on how kind your banks are. If they've implemented Play Integrity check and they demand strong integrity, then you're out of luck. There's nothing you can do on a custom ROM that requires bootloader to be unlocked. Those that only demand basic or device integrity, however, should pass with the preinstalled XiaomiEUModule.

 

[CR0OK]

Hello,

thanks for quick reply! I dont know this function may be problem with Play integrity .

I dont have problem with payment with Google Pay. It works like a charm.

So, there is option to all three banks have strong integrity only with QR code payment?

Thanks

 

[leledumbo]

Hello,

thanks for quick reply! I dont know this function may be problem with Play integrity .

I dont have problem with payment with Google Pay. It works like a charm.

So, there is option to all three banks have strong integrity only with QR code payment?

Thanks

Chance is there, just like two of my banks. Fortunately the other two are not as strict and only warn instead of closing, so I fight back by moving a big amount of balance to the kind ones.

 

[Robert Pfeilmayer]

Hello,
POCO F3, since I switched from XIAOMI.EU 13 to HYPEROS (directly without formatting) without any other change or modification the battery consumption has increased and since I switched to HYPEROS xiaomi.eu_ALIOTH_OS1.0.6.0.TKHCNXM_13 the top of the screen gets a little warm during normal use.
Another peculiarity since I use HYPEROS is the charging speed, always with the same conditions and same hardware if I reboot the phone and then put it on charge it gets around 1200/1300 mA, from there in the following days if I don't reboot the phone anymore the mA goes down more and more until it gets around 700 mA and the only difference from 1300 mA to 700 mA is the reboot.

Is there anything I can do to improve this without loss of app. data?

Thank you.

Hello there
I also have issues with HYPEROS xiaomi.eu_ALIOTH_OS1.0.6.0.TKHCNXM_13 on my Poco F3. I updated today from 1.0.3.0 to 1.0.6.0 and charging dropped from about 20W to 11W tops (hanging mostly around 8W). Any ideas?
Cleared dalvik and cache a few times hoping for a miracle but didn't help.
Thank you

 

[pegasocv]

Hello there
I also have issues with HYPEROS xiaomi.eu_ALIOTH_OS1.0.6.0.TKHCNXM_13 on my Poco F3. I updated today from 1.0.3.0 to 1.0.6.0 and charging dropped from about 20W to 11W tops (hanging mostly around 8W). Any ideas?
Cleared dalvik and cache a few times hoping for a miracle but didn't help.
Thank you

No idea and even here it doesn't seem that anyone has any idea how to solve it. I was beginning to think that only I had this problem, hopefully someone will come by who knows how to solve it.

 

[Pepitp]

I can't use an option on my banking app, send money to phone number (paylib)
I have delete play integrity fix and restart, install your app xiaomi eu module, but always same error

Any ideas please?

 

[leledumbo]

I think I magically found the source of my battery drain problem and its fix. I curious because the device is hot and even the UI cannot run in 120Hz. This is a typical symptom of a swap in action. So I check my Memory Extension config and indeed it was Off. BUT, opening Termux and executing `free` shows that 8GB is allocated AND used. Thankfully I have root, so I simply `cat /proc/swaps` to see the allocated swap file, then `swapoff <that swap file>`. Animation smoothness instantly returns and the heat goes away. Been 4 hours and the battery drain is not crazy anymore. Feel free to try on your device.

 

[beroid]

Hello, after the last update, the front camera stopped working in the phone. Before that, everything was OK. Latest Update build number xiaomi.eu_FUXI_OS1.0.10.0.UMCCNXM_14
The phone model Xiaomi 13 is code name FUXI.

 

[pegasocv]

I think I magically found the source of my battery drain problem and its fix. I curious because the device is hot and even the UI cannot run in 120Hz. This is a typical symptom of a swap in action. So I check my Memory Extension config and indeed it was Off. BUT, opening Termux and executing `free` shows that 8GB is allocated AND used. Thankfully I have root, so I simply `cat /proc/swaps` to see the allocated swap file, then `swapoff <that swap file>`. Animation smoothness instantly returns and the heat goes away. Been 4 hours and the battery drain is not crazy anymore. Feel free to try on your device.

Bye,
I also have ROOT would you have the patience and the will to explain to me step by step what I have to do? Thank you.

 

[ejatamer]

q: when we use "update rom* option to flash the rom, will it overriding the modem related file or it will skip it?

 

[Igor Eisberg]

q: when we use "update rom* option to flash the rom, will it overriding the modem related file or it will skip it?

Modem is part of the update, naturally.

 

[Bamn09]

I think I magically found the source of my battery drain problem and its fix. I curious because the device is hot and even the UI cannot run in 120Hz. This is a typical symptom of a swap in action. So I check my Memory Extension config and indeed it was Off. BUT, opening Termux and executing `free` shows that 8GB is allocated AND used. Thankfully I have root, so I simply `cat /proc/swaps` to see the allocated swap file, then `swapoff <that swap file>`. Animation smoothness instantly returns and the heat goes away. Been 4 hours and the battery drain is not crazy anymore. Feel free to try on your device.

Same issue here (on houji), just don't understand how to disable?

What is "that swap file"?
Termux output is not showing a number or something, just swap:


Many thanks for finding this issue, I was annoyed not being able to find the drain!

 

[Bamn09]

Latest update installed on houji, seems snappy!

Unfortunately some apps don't work, I open, 1 sec later they close.

For example Google maps.

Could someone check, because it might be just my device?

 

[Bamn09]

Not sure if helpfull, tried to make log from maps closing.

 

[gogocar62]

Latest update installed on houji, seems snappy!

Unfortunately some apps don't work, I open, 1 sec later they close.

For example Google maps.

Could someone check, because it might be just my device?

I don't notice any problem on my Xiaomi 14.

 

[Bamn09]

I am not able to fix it, flashing previous Rom doesn't boot.
Hope someone has a suggestion what to try, about 50% off my apps are closing directly after opening.

Apologies for spamming this thread as it seems to be my phone only.

Before flashing latest update I had 0 issues.

 

[gogocar62]

Try entering these commands.

adb shell pm compile -a -f --full
adb shell reboot

 

[pegasocv]

I think I magically found the source of my battery drain problem and its fix. I curious because the device is hot and even the UI cannot run in 120Hz. This is a typical symptom of a swap in action. So I check my Memory Extension config and indeed it was Off. BUT, opening Termux and executing `free` shows that 8GB is allocated AND used. Thankfully I have root, so I simply `cat /proc/swaps` to see the allocated swap file, then `swapoff <that swap file>`. Animation smoothness instantly returns and the heat goes away. Been 4 hours and the battery drain is not crazy anymore. Feel free to try on your device.

Hello,
what command did you use to free the memory/swap?

 

[iGears88]

Latest update installed on houji, seems snappy!

Unfortunately some apps don't work, I open, 1 sec later they close.

For example Google maps.

Could someone check, because it might be just my device?

dirty or clean flash=?, i recently flash latest, no problems so far

 

[Bamn09]

Try entering these commands in fastboot.

adb shell pm compile -a -f --full
adb shell reboot

Thank you!
That did the trick! (not in fastboot though, as you know)

Isn't this process normally always triggered by flashing an update?
Some apps did show failed but are working again nevertheless.

Thanks!

Now if we could only get rid of the secret swap!

 

[Bamn09]

I think I magically found the source of my battery drain problem and its fix. I curious because the device is hot and even the UI cannot run in 120Hz. This is a typical symptom of a swap in action. So I check my Memory Extension config and indeed it was Off. BUT, opening Termux and executing `free` shows that 8GB is allocated AND used. Thankfully I have root, so I simply `cat /proc/swaps` to see the allocated swap file, then `swapoff <that swap file>`. Animation smoothness instantly returns and the heat goes away. Been 4 hours and the battery drain is not crazy anymore. Feel free to try on your device.

Actually the extended memory setting is not functioning at all, I've tried all options, but terminal shows a +-8gb swap file on each.

Not sure if the right comment, but:
Swapoff /dev/block/zram0
Also doesn't work, or at least doesn't survive a reboot.

Edit: the command does seem to work, but a reboot, for me, activates a +-8gb swap again.

For now I'll let tasker run te command after every reboot.
Swap should not be necessary on this powerful device.

 

[gogocar62]

My mistake. Of course they are ADB commands.