MIUI 12.0 MIUI 12 STABLE RELEASE


Do you like this MIUI version?


  • Total voters
    4,215
Status
Not open for further replies.
Good that the flashing worked.
The error message you receive indicates that you again mistyped something.
Does the "dir" command give you among other files the twrp342.img, too? Did you rename your 3.4.2.0623 to twrp342.img?
Fastboot commands syntax must be respected strictly.

Послато са Mi 10 помоћу Тапатока
 
1206 and 0623 are almost exactly the same. I can't tell you where to find it.
Try one more thing:
fastboot reboot bootloader
Then try rebooting to twrp as you did before.
I suggest after each boot to bootloader you verify the phone is recognized with fastboot devices.
Also, try powering off the phone and then see if it boots to your recovery (vol up + power).
It should.
However, the problem is that 3.4.0 you can use only with OTG drive.

Послато са Mi 10 помоћу Тапатока
 
Try one more thing:
fastboot reboot bootloader
Then try rebooting to twrp as you did before.
I suggest after each boot to bootloader you verify the phone is recognized with fastboot devices.
I will try that.
EDIT: The first command worked, but not the second. Look here:
Second Fastboot reboot error.png

Maybe I have to flash the 3.4.2.img at first.

Also, try powering off the phone and then see if it boots to your recovery (vol up + power).
I am not able to power off my phone. Whatever I try I always enter the "FASTBOOT" image.
 
Last edited:
Ufffff, another idea - try fastboot reboot recovery. It should bring you to your recovery.

Послато са Mi 10 помоћу Тапатока
 
@m@c|-|oR:
That worked!!!!
Now I get offered the TWRP-3.4.2b-1206 for MI 10 and have several options.
Shall I choose the "Install" button or any other one ("Wipe""/"Backup"/"Restore"/"Mount"/"Settings"/"Advances"/""Reboot")?
 
I will try that.
EDIT: The first command worked, but not the second. Look here:
View attachment 33623
Maybe I have to flash the 3.4.2.img at first.

I am not able to power off my phone. Whatever I try I always enter the "FASTBOOT" image.
Not fastboot reboot twrp342.img but ..
fastboot boot twrp342.img

Twrp 1206 here ...
 
Great!
Glad it worked. My guess is that you actually flashed the 1206 instead of 3.4.0, but that doesn't matter now.
Next step, connect the phone to the PC and make sure it is recognized as an external storage device. If so:
Format data (advanced wipe I think), type "yes" for confirmation,
You could as well do wipe cache/dalvik, just in case.
Copy the ROM you want to install to your phone storage.
Choose install, and follow the procedure.
Wipe cache/dalvik.
Reboot to system.
Be patient, the first boot could take several minutes, do not power off the phone until it fully boots.

Послато са Mi 10 помоћу Тапатока
 
Not fastboot reboot twrp342.img but ..
fastboot boot twrp342.img

Twrp 1206 here ...
Uppps! You're right, I was misleading him.
My bad, sorry.
At least he managed to boot to recovery.
:)

Послато са Mi 10 помоћу Тапатока
 
@m@c|-|oR:
Since this is the moment I waited for since more than 12 hours and I don't want to make something wrong, please let me know which one of the various buttons I should choose now (see my last post).
 
Uppps! You're right, I was misleading him.
My bad, sorry.
At least he managed to boot to recovery.
:)

Послато са Mi 10 помоћу Тапатока
And also you missed the step to reboot to recovery again after format data , this is mandatory ..
There is also a trick for fast first installation for newbies..
Enter twrp ..
Choose Install / find the rom zip and install EU rom ( swipe to confirm flash )..
After installation finish go back to main menu ..
Choose Wipe / Format data / type yes and hit enter ..
Go back to main menu and choose Reboot to system ..
Wait few minutes to boot ..
 
Last edited:
And also you missed the step to reboot to recovery again after format data , this is mandatory ..
There is also a trick for fast first installation for newbies , enter twrp , install EU rom , format data , reboot to system ..
To be honest I don't remember if I did it the other night when I was flashing 12.2.7.
Maybe because I was on 0623 at the time. Didn't mess with all new/old twrp thing.

Послато са Mi 10 помоћу Тапатока
 
@m@c|-|oR:
That worked!!!!
Now I get offered the TWRP-3.4.2b-1206 for MI 10 and have several options.
Shall I choose the "Install" button or any other one ("Wipe""/"Backup"/"Restore"/"Mount"/"Settings"/"Advances"/""Reboot")?
Read my post #3717.
Wipe - advanced wipe I think and then other steps. Including what @gkalen mentioned.

Послато са Mi 10 помоћу Тапатока
 
I repeat my urgent question: Which TWRP button shall I press????

EDIT: I just want to get the ROM updated, the v12.2.2.7 has already been downloaded by the phone before the destaster began.
 
@gkalen I personally don't like the idea formatting data after flashing, but it works - no problem.
ευχαριστώ

Послато са Mi 10 помоћу Тапатока
 
@gkalen I personally don't like the idea formatting data after flashing, but it works - no problem.
ευχαριστώ

Послато са Mi 10 помоћу Тапатока
I said , the fastest way for newbies it's this ..
But it doesn't harm at all and it works like a charm .. the process will be correct even like that ..
Παρακαλώ ..
 
I repeat my urgent question: Which TWRP button shall I press????

EDIT: I just want to get the ROM updated, the v12.2.2.7 has already been downloaded by the phone before the destaster began.
If you format data before flashing (as per my suggestion) your ROM.zip file will be erased and you have to transfer it again.
If you follow the instructions by @gkalen you are good to go.
Format data in either case is mandatory, it's only a matter of sequence of steps.

Послато са Mi 10 помоћу Тапатока
 
Thanks, I have chosen the "Install" button, but to find the already downloaded ROM v12.2.2.7 I now have to know within which folder of the Internal Storage I can find it.
Wherever you copy it ..
You have to copy the zip in the root of sd card or anyway in a folder to find it ..
 
It was my Mi 10, which had downloaded the ROM, but I don't know its storage folder. An SD card is not used until now.
Why should I copy it again somewhere?
Go to download folder and btw you can't use sd card on mi 10 , only external storage like OTG ..
 
so a short update about the situation of 12.2.7 for Mi10
Gpay working no issues anymore no idea why but it is what it is
what i've done as i messed up anyway:
download TWRP TWRP3.4.2.b1206 from the forum
Downloaded 12.2.2 and 12.2.7 from forum as i had notification issues whicha re gone as well now
boot into fastboot
fastboot/adb shell comand: fastboot devices (should be listed if not enter adb devices to start demon)
fastboot boot twrp.img (or whatever you named it. Need to be in same folder as adb)
give it time it should be loaded fast in command but it actualy take like 30sec to boot in twrp

Ignore the steps i did to avoid loosing data. marked with a -
-Delete data etc so it was completly empty
-adb devices
-adb push xiaomi.eu_multi_MI10_V12.2.2.0.RJBCNXM_v12-11 /sdcard
-wait a very long time do NOTHING it take time to transfer the date
-when done install zip within TWRP
-clear dalvik etc again. also data
-boot system
after booted up i only installed backup from google. NOT XIAOMI!!! very important for xiaomi backup: do NOT, i repeat do NOT restore settings from cloud. only missing apps AFTER google is finishd. Why? because it messed up my energy settings previouse thats why i complete reinstalled everything. had no notifications and i was able to reproduce the issue after the xiaomi backup restore with settings incl. Do as you wish but keep in mind it messed with my energy settings and had no chance to keep apps running in background with a lock and ignore energy setting enabled.

So after system is working or you want to update do the following and no data will be missing as i tryed and others as well:
download the newest firmware to the phone from updater
Disable fingerprint and lockscreen. (i will test it a other time if it works or not to decrypt with a pin. some say it can not decrypt anymore but it worked all versions till now for me)
turn off phone and boot into fastboot
on pc: fastboot devices (if not showing do adb devices and start demon again)
fastboot boot twrp.img (as you named your twrp used previouse)
once booted install zip from internal storage
after flashing just reboot to system do nothing else
patience for the boot as all updates take their time to boot first time afterwards. like 5 minutes or maximum 10 minutes i say
your done.

If a pro want to add something or want to correct me please do it and i will adjust this post accordingly

Edit: important note: if you fail to fastboot boot twrp bc of a error message reenter fastboot on phone by pressing volume down and power at the same time and try to boot twrp again. if still not working repeat it

Edit 2: gpay not worked at first, but as i use revolut i added the card from within revolut to gpay and since then gpay worked also for me other card. Safetynet still fails but that crap can go somewhere else in my opinion

Edit 3: you can use a OTG USB stick to put the firmware on that instead of use the command "push". thank you @m@c|-|oR

Hi, thanks for the steps ... I just want to know if data deletion is necessary, or can I just wipe cache and devilk?
 
Go to download folder ..
I don't see a folder named "Download" or similar.
My phone shows the options for "Install Zip" - Select File from Internal Storage (0 MB)".
The list contains a lot of options (e.g. "firmware" or "storage"), but I cannot find the ROM Zip.
 
Status
Not open for further replies.

Similar threads