HyperOS 1.0 HyperOS 1.0 STABLE RELEASE


These commands are entered while the device is running. Not via fastboot.
They are ADB commands.
Code:
adb shell pm compile -a -f --full
adb shell reboot
The "USB debugging" and "USB debugging (Security settings)" functions must be enabled in the "developer options" settings.
You hero, saved my day (and phone from wiping data). I've tried to upgrade 11 Ultra (star) from 1.0.3.0 to 1.0.6.0 in twrp and had sim cards disconnecting. And made stupid mistake trying to install back to 1.0.3.0, where flash system broke (wrong user password in twrp, phone boot up, but apps and settings cannot work). After reflashing in fastboot mode to 1.0.6.0 sim cards still was reconnecting, screen brightness was blinking and this adb compile command looks like fixed phone to normal. Is it bad, that some compile processes failed? Like:
[com.xiaomi.bluetooth] Failure
[com.android.vending] Failure
 
Last edited:
Hi all. I have a stupid question.....If I want to factory reset my CN Xiaomi 13 Pro with latest stable .eu Rom....How do I do that? Reflash the Rom again in fastboot or just click the factory reset button in the settings menu? I don´t have TWRP installed. Thanks!
 
Hi all. I have a stupid question.....If I want to factory reset my CN Xiaomi 13 Pro with latest stable .eu Rom....How do I do that? Reflash the Rom again in fastboot or just click the factory reset button in the settings menu? I don´t have TWRP installed. Thanks!
You can via the settings menu, or flash again like clean install
 
How fix it?
Fuxi last update non-root
Xiaomi interconnectivity
 

Attachments

  • Screenshot_2024-10-30-04-59-57-077_com.miui.home.jpg
    Screenshot_2024-10-30-04-59-57-077_com.miui.home.jpg
    426 KB · Views: 206
Last edited by a moderator:
How fix it?
Fuxi last update non-root
Xiaomi interconnectivity
You can't fix it.
 
You hero, saved my day (and phone from wiping data). I've tried to upgrade 11 Ultra (star) from 1.0.3.0 to 1.0.6.0 in twrp and had sim cards disconnecting. And made stupid mistake trying to install back to 1.0.3.0, where flash system broke (wrong user password in twrp, phone boot up, but apps and settings cannot work). After reflashing in fastboot mode to 1.0.6.0 sim cards still was reconnecting, screen brightness was blinking and this adb compile command looks like fixed phone to normal. Is it bad, that some compile processes failed? Like:
[com.xiaomi.bluetooth] Failure
[com.android.vending] Failure
Copy modem.img file from the 1.0.3 update zip file. Overwrite the modem.img in 1.0.6 folder. Then flash again 1.0.6 using the update_windows.bat file. Then after phone booted, do the compile. Settings app is still accessible, you can turn on USB debug option. I know you were getting the "there is no app. Reboot" or some crap messages. Without app opening.

This is what I did to solve my problem on Venus. Which is Mi 11


HAS ANYONE TRIED 1.0.7 ON VENUS? 10/28 update release, i am still crying scared from the last time I tried to update, brick the SIM card and needed the old modem.img file to make working. The performance is very good if you forget about battery life. So far 1.0.6 i like.
 
Hello, dear developers. I have been using your firmware for a long time. I like everything very much. But there is one problem that occurs in all versions - delayed notifications from applications. They are given all permissions in the settings. What can be done about this? Is there a solution? Xiaomi 13 xiaomi.eu hyperOs 1.0.17.0 stable.
 
Last edited:
Upgraded on fuxi 1.0.17, all went well. Battery life was great and now it looks insane. Animations feel snappier and fonts look sharper as well, but that might just be placebo :)
 
  • Like
Reactions: chufanik
Update with fastboot in Win works fine.
Open command prompt on your windows PC
go to the directory of your unzipped Rom
start the .bat file you need
When I go to the file in Windows Explorer and select Run. The command prompt then opens. It then says “press any key”. If I press one, the window closes. Nothing happens after that.
How do I get to the update.
 
hello all, i have a question with regards to root. I lose root when I upgrade via fastboot right? can i patch the init_boot.img in the zip file BEFORE i upgrade via fastboot? I'm on vermeer, which has no official/working TWRP yet
 
herkese merhaba, root ile ilgili bir sorum var. Fastboot ile yükselttiğimde root'umu kaybediyorum değil mi? Fastboot ile yükseltmeden ÖNCE zip dosyasındaki init_boot.img'yi yamalayabilir miyim? Henüz resmi/çalışan bir TWRP'si olmayan vermeer'deyim
 
  • Like
Reactions: apbucaneg0816
When I go to the file in Windows Explorer and select Run. The command prompt then opens. It then says “press any key”. If I press one, the window closes. Nothing happens after that.
How do I get to the update.
I never mentioned Windows File Explorer
press on the keyboard button Windows and R together and bottom left a execute window will oped
type in cmd, this is your command prompt
here is a sample from my PC
once you in the correct directory, just type: windows_install_update.bat and the batch file will run
1730283809873.png
 
Last edited:
Windows defender reports a virus when downloading 1.0.17 for fuxi and won't let me finish the download. This is the first time in ten years that something like that has happened.
 
Fuxi 1.0.17.0 the Pro version of AI eraser still doesn't work. It's stopped working on previous rom 1.0.14.0 and not fixed. No other major issues founded yet.Anyway... good job to devs like always!!! (if somebody know how to fix the Pro ai eraser , please tell me)
 

Attachments

  • Screenshot_2024-10-30-14-34-27-351_com.miui.mediaeditor-edit.jpg
    Screenshot_2024-10-30-14-34-27-351_com.miui.mediaeditor-edit.jpg
    103.8 KB · Views: 73
  • Screenshot_2024-10-30-14-34-46-103_com.miui.mediaeditor-edit.jpg
    Screenshot_2024-10-30-14-34-46-103_com.miui.mediaeditor-edit.jpg
    50 KB · Views: 72
Copy modem.img file from the 1.0.3 update zip file. Overwrite the modem.img in 1.0.6 folder. Then flash again 1.0.6 using the update_windows.bat file. Then after phone booted, do the compile. Settings app is still accessible, you can turn on USB debug option. I know you were getting the "there is no app. Reboot" or some crap messages. Without app opening.

This is what I did to solve my problem on Venus. Which is Mi 11


HAS ANYONE TRIED 1.0.7 ON VENUS? 10/28 update release, i am still crying scared from the last time I tried to update, brick the SIM card and needed the old modem.img file to make working. The performance is very good if you forget about battery life. So far 1.0.6 i like.
Updated 1.0.7 ON VENUS no issues with SIM , also had no issues doing previous update
 

Similar threads

  • Locked
HyperOS 1.0 24.7.1
Replies
54
Views
40K
Replies
51
Views
35K
  • Locked
HyperOS 1.0 24.7.15/17
Replies
87
Views
37K
  • Locked
HyperOS 1.0 24.7.8/12
Replies
50
Views
32K